Apologies for the stupid question, is the host IP in rdadmin still the dhcp address?
On 4 Apr 2017 01:15, "Rob Landry" <[email protected]> wrote: > > OK; rmlsend started working after I rebooted the machine. > > Now what's happening is that GPI inputs aren't triggering macros. > > I have a station that runs baseball broadcasts from a satellite feed. When > it's time for the game, a macro loads and starts the special game log > instead of the regular daily log. It then executes three commands to enable > GPI's: > > GE 0 I 1 1 ! > GE 0 I 2 1 ! > GE 0 I 3 1 ! > > GPI 1 is the cue to run a local station ID; > GPI 2 is the cue for a local break; > GPI 3 is end-of-game. > > When a closure is received from the satellite, I see it in ripcd.log: > > 03/04/2017 - 19:40:59.739 : GPI 0:1 ON > 03/04/2017 - 19:41:00.240 : GPI 0:1 OFF > > ... but the macro associated with the closure never fires. As a temporary > workaround, I set the macros up on Sound Panel buttons; when the button is > pressed the macro runs as it is supposed to, but I can't get any GPI to > fire a macro. > > This is RD 2.15.2 running on CentOS 6. I'm using a Measurement Computing > PCI-PDISO8 GPIO board that seems to work reliably. > > I am wondering if I have forgotten something. That's likely, as I am > running on almost no sleep. > > I just spotted some interesting entries in ripcd.log: > > 03/04/2017 - 19:17:48.022 : received rml: 'GI 0 I 1 1 50003!' from > 10.95.3.201 > 03/04/2017 - 19:17:48.031 : cart: 50003 > 03/04/2017 - 19:17:48.032 : received rml: 'GI 0 I 1 0 0!' from 10.95.3.201 > 03/04/2017 - 19:17:48.032 : cart: 0 > 03/04/2017 - 19:17:48.032 : received rml: 'GI 0 I 2 1 50004!' from > 10.95.3.201 > 03/04/2017 - 19:17:48.032 : cart: 50004 > 03/04/2017 - 19:17:48.032 : received rml: 'GI 0 I 2 0 0!' from 10.95.3.201 > 03/04/2017 - 19:17:48.032 : cart: 0 > 03/04/2017 - 19:17:48.033 : received rml: 'GI 0 I 3 1 50001!' from > 10.95.3.201 > 03/04/2017 - 19:17:48.033 : cart: 50001 > 03/04/2017 - 19:17:48.033 : received rml: 'GI 0 I 3 0 0!' from 10.95.3.201 > 03/04/2017 - 19:17:48.033 : cart: 0 > > If I read this right, something is assigningthe macro carts that will run > with each GPI goes high or low. The cart numbers are the ones I assigned in > rdadmin, so that checks out. > > What strikes me as odd is the address 10.95.3.201. That was this machine's > DHCP-assigned address when I had it on my bench a month ago. Now it has the > static address 10.1.10.2, but clearly some part of the software is > remembering the old address. Could that have anything to do with my problem? > > > Rob > > -- > Я там, где ребята толковые, > Я там, где плакаты "Вперёд", > Где песни рабочие новые > Страна трудовая поёт. > > On Sun, 2 Apr 2017, Rob Landry wrote: > > >> I have a machine running RD 2.15.2 under CentOS 6. rml commands don't >> seem to work. >> >> if I start rmlsend from a terminal window, put in 'localhost' as the >> host, and enter any rml command, it will show up in my ripcd log but it >> will have no effect on rdairplay. >> >> I've never encountered this condition before. Weird, huh? >> >> >> Rob >> >> -- >> Я там, где ребята толковые, >> Я там, где плакаты "Вперёд", >> Где песни рабочие новые >> Страна трудовая поёт. > > > _______________________________________________ > Rivendell-dev mailing list > [email protected] > http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev > >
_______________________________________________ Rivendell-dev mailing list [email protected] http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev
