I would like to try but not sure I can identify what needs rolled back.
Sounds like I need to wipe the drive and start over.

On Thursday, July 13, 2017, Steve Varholy <[email protected]> wrote:
> I had a similar issue with my appliance. The upgrade of the appliance
caused an update to the driver for the built-in soundcard. The updated
driver no longer supported 44.1. The only way to get it to work was run 48k
sample rate and everything ran fast/not at all.
>
> Ended up getting another soundcard.
>
> Can you roll back just the driver?
>
> Steve Varholy
> President and General Manager
>
> </mail/u/2/s/?view=att&th=15d3c6d34539a56f&attid=0.3&disp=emb&zw&atsh=1>
>
> The Historic Barringer Building
>
> 1338 Main Street - Suite 202
>
> Columbia, South Carolina 29201
>
> Office: (803) 753-7260 x 251
>
> Direct: (803) 404-5535
>
> Cell: (703) 585-2101
>
> A Service of the Independent Media Foundation
>
> ________________________________
> From: [email protected] <
[email protected]> on behalf of Frank White <
[email protected]>
> Sent: Thursday, July 13, 2017 10:45:57 AM
> To: [email protected]
> Subject: [RDD] Audio Adapter Issue
>
> I am hoping someone on the list can point me in the right direction with
an audio adapter issue.  While trying to make the GPIO system work I needed
to update to the latest version of Rivendell.  I was on 2.5.5.  Along with
the Rivendell update I updated the other software.  Now on version 2.16.0.
Originally loaded the software using the Paravel Appliance Software.  I
have always had to add "rate 44100" to the asound.conf file.  But after the
update the sound adapter would not be recognized by Rivendell.  Changed
System Settings in RDADMIN to 44100 and the adapter shows up again.  But
now the audio will play for about 2 seconds and then sound like white
noise.  Anyone have any ideas?
>
> --
> Frank White
> Frank White Technology
>

-- 
Frank White
Frank White Technology
_______________________________________________
Rivendell-dev mailing list
[email protected]
http://caspian.paravelsystems.com/mailman/listinfo/rivendell-dev

Reply via email to