[Rodopi] Rodopi and ICVerify stopped talking

[Paul Moore]

Well all is better. Just wanted to finish this thread. What I did was 
replace all the ICV files in the System32 folder with the original 
install (I had left this intact from when I fisrt setup Rodopi) while in 
safe mode because of files being used. Rebooted and problem gone. It is 
possible that a reboot was all that I needed to do, but I wasn't 
interested in testing out different things on a production box.

Paul

Paul Moore wrote:

Hi All,

It seems that Rodopi 5.1sp2 and ICVerify 2.26 quit talking to each 
other. Here is what transpired, we started to get invalid terminal id 
errors. I called our bank and they said that our merchant number had 
changed and I need to put in a new one. Well, in doing that the money 
hungry ICVerify people always wants $100 buck whenever a change is 
made. ICV is closed on Saturday so I couldn't validate.

When I talk to the bank today they said the would set our number back 
to the old one an life will be good again. I have tested ICVerify 
through its window console and it seems to be just fine. Now when 
Rodopi attempts nothing seems to happen. I get no logs in ICV and the 
modem (external and reset a million and one times). I attempted to 
restore the old set files from backup, ICV folks said that wouldn't be 
necessary but I did it any way. Still no luck.

Anyone know what else I can check. Nothing is in the event viewer and 
Rodopi only says "Credit card transaction failed!" during a batch, but 
those that I have attempted to run do not appear in FailedCC and I 
cannot pull them up again on the Batch job. (This is really something 
else that has to be dealt with, just wanted to give as much info as 
possible.)

Thanks,
Paul


---------------------
To Leave the Rodopi mail list send a message to 
[EMAIL PROTECTED] with the word LEAVE as the message body.

Please also visit the Rodopi FAQ at http://www.rodopi-faq.com
---------------------




---------------------
To Leave the Rodopi mail list send a message to [EMAIL PROTECTED] 
with the word LEAVE as the message body.

Please also visit the Rodopi FAQ at http://www.rodopi-faq.com
---------------------