That would be in the IC Verify folder where it was origanally installed
to. It should have been copy to $system/winnt/system32 folder.
Paul
technical wrote:
WHere might one find the ICVOLE32.exe mentioned here. I can not find it
anywhere?
Thanks....TIm
Run the ICVOLE32.EXE executable from the SYSTEM32 directory once to register
the ICVerify ActiveX object.When ICVOLE32.EXE starts (ICVerify OLE
Interface), press the button Initialize and then Exit to finish. This way
the ICVerify COM object will be registered and Rodopi will call directly
ICVerify using OLE interface and you don't need to have running any ICVerify
program.
----- Original Message -----
From: "Paul Moore" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, January 06, 2004 2:14 PM
Subject: [Rodopi] Rodopi and ICVerify stopped talking
Well all is better. Just wanted to finish this thread. What I did was
replace all the ICV files in the System32 folder with the original
install (I had left this intact from when I fisrt setup Rodopi) while in
safe mode because of files being used. Rebooted and problem gone. It is
possible that a reboot was all that I needed to do, but I wasn't
interested in testing out different things on a production box.
Paul
Paul Moore wrote:
Hi All,
It seems that Rodopi 5.1sp2 and ICVerify 2.26 quit talking to each
other. Here is what transpired, we started to get invalid terminal id
errors. I called our bank and they said that our merchant number had
changed and I need to put in a new one. Well, in doing that the money
hungry ICVerify people always wants $100 buck whenever a change is
made. ICV is closed on Saturday so I couldn't validate.
When I talk to the bank today they said the would set our number back
to the old one an life will be good again. I have tested ICVerify
through its window console and it seems to be just fine. Now when
Rodopi attempts nothing seems to happen. I get no logs in ICV and the
modem (external and reset a million and one times). I attempted to
restore the old set files from backup, ICV folks said that wouldn't be
necessary but I did it any way. Still no luck.
Anyone know what else I can check. Nothing is in the event viewer and
Rodopi only says "Credit card transaction failed!" during a batch, but
those that I have attempted to run do not appear in FailedCC and I
cannot pull them up again on the Batch job. (This is really something
else that has to be dealt with, just wanted to give as much info as
possible.)
Thanks,
Paul
---------------------
To Leave the Rodopi mail list send a message to
[EMAIL PROTECTED] with the word LEAVE as the message body.
Please also visit the Rodopi FAQ at http://www.rodopi-faq.com
---------------------
---------------------
To Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with the word LEAVE as the message body.
Please also visit the Rodopi FAQ at http://www.rodopi-faq.com
---------------------
---------------------
To Leave the Rodopi mail list send a message to [EMAIL PROTECTED]
with the word LEAVE as the message body.
Please also visit the Rodopi FAQ at http://www.rodopi-faq.com
---------------------
|
