> It doesn't need all binaries in fact, but there are also header files > etc. created during build, and specifically those were lacking for your > first attempts.
Ah ok. Thanks. > >> - Run the prepare_kernel.sh script to apply the Adeos-iPipe-Patch and > >> link the kernel with the Xenomai sources. > >> - Copy your .config to the kernels root directory. > >> - Run "make menuconfig" and select additional options. Make sure > >> Xenomai is enabled. Or run "make oldconfig" if you are happy with the > >> default configuration. > >> - Build your kernel with "make vmlinux" or "make bzImage". > >> - Then start configuring RTnet. > > > Compiling modules against kernel X, but trying to run them with kernel > Y, is the right way to enter the winding road again :). This only works > if both kernels were build from practical identical sources, using the > same .config and the same compiler. So, be warned (and don't complain ;)). I'll do better than that ;) I'll give a step-by-step report of what I am doing. Actually I did expect the kernel src to be identical but I have just patched the fresh kernel from Wolgang's advised kernel.org site and after just checking to make sure I am using the same configure, discovered that the previous kernel had been patched with squashfs and unionfs. So far this is the only perceivable difference. I am NOT going to patch the new kernel for the simple reason that I want to see whether rtnet at least builds on the new/fresh kernel. If it does I will go back to patch with squashfs and unionfs to see if that perhaps is the cause for this problem. Here we go..... Roland. > > Jan > > > ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ RTnet-users mailing list RTnet-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/rtnet-users
