George, My recommendation would be to use a different adhesive, specifically a water-based contact adhesive. There are several available. Part of your problem is that the blue foamboard is impervious to vapors, and the large surface area does not allow the vapors (either solvent or water) to escape for a good bond. Using contact adhesive allows the majority of vapors to evaporate before placing the materials together, and you get a good bond almost instantly.
Darrell Smith --- In [email protected], "gpmarcopulos" <[EMAIL PROTECTED]> wrote: > > Gentlemen: > > I need advise on attaching blue board to quarter inch luan. I used > liquid nails; after 24 hours this was affixed to a frame of 1 x 3s. > However, in a short time the 1.5" blue board separated from the luan. > What did I do wrong? Is there a specific method of application? A > better adhesive? Thank you, George > Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
