Hi Bill:
A problem with that is the AM boxcars and the S12's I have dealt with
recently come cored for 2-56 taps or are already threaded 2-56. Thus, the
tapped/cored hole will have to be filled redrilled/retapped in order to use
the Kadee supplied screw. Not the end of the world, but I decided it would
simply be faster to do what I ended up doing. Gotta' remember that I am the
consumate lazy modeler.
Andre Ming
Patootey, OK
> Hi All --
>
> I have also found that using a .040 drill to make holes to match the Kadee
> 802 box will allow you to use the Kadee self tapping screws provided with
> the couplers. I have never had these fail, but I have had car damage
> from
> train mishandling!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
