I recently purchased an SHS 2-8-0 with DCC Tsunami. The locomotive is great
but I can not program the Tsunami with my Digitrax DB150/DT100. I have managed
to change the decoder address but nothing else takes. I tried both general
"broadcast" programming and also POM. Neither works.
I have found on the web a couple of booster devices that will program the
Tsunami but both of them say not to use it on the layout - just on the
programming track.
This would eliminate any programming on the main and would reduce the Tsunami's
usefulness on larger layouts using consisting and on-line adjustments for
grades, loads, etc. I can't believe that all the Tsunami users have given up
on these techniques.
My questions are - for those using this locomotive with DCC: What are you
using for a command station? Which system allows you to do programming on the
main? What work-around do you use if your controller won't do it?
Thanks
Art Armstrong
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
