Art, I can only answer part of your queston. I have a Tsunami equipped SHS 2- 8-0, and have also installed one in a Rex Mogel that I kit built. The layout is powered by a Lenz LZV100 command/power station. The only thing I've programmed on the programming track is the decoder address for the Rex. The SHS engine came with the road number preprogramed for me, which saved me a step.
Both Tsunamis accept changes to the CVs using POM. I don't know that I have changed every CV in the decoders but I have come pretty close. I have never had a problem with this setup. I don't have experience with Digitax equipment, so I can't help you with troubleshooting or possible workarounds as I've never needed to do any. Good luck with your search for answers, and sorry I can't offer more help. Peter Gagnon --- In [email protected], "Art Armstrong" <[EMAIL PROTECTED]> wrote: > > I recently purchased an SHS 2-8-0 with DCC Tsunami. The locomotive is great but I can not program the Tsunami with my Digitrax DB150/DT100. ... > My questions are - for those using this locomotive with DCC: What are you using for a command station? Which system allows you to do programming on the main? What work-around do you use if your controller won't do it? > > Thanks > > Art Armstrong > > [Non-text portions of this message have been removed] > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[EMAIL PROTECTED] mailto:[EMAIL PROTECTED] <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
