Peter Go in there and cut the plastic clips on one end of the truck and take it off that way....after that if it does not snap right back in place use the screws that held the metal bracket back in the same spot without the metal bracket..
Becareful with the screw driver you can sink that some where about an inch deep if it slips gale hall ----- Original Message ----- From: Peter Vanvliet To: [email protected] Sent: Monday, December 29, 2008 8:09 PM Subject: {S-Scale List} Question About SHS Removing Truck Cover Plate I am trying to change out the wheelset of my new SHS NW2. I have never done one of these. I am following the instructions and I have removed the coupler. I now need to gain access to the wheels to replace them. The plastic cover at the bottom of the truck supposedly snaps onto the metal support of the truck. I can see how that is done. However, what I can't figure out is how to get that plastic cover to snap *off* of the metal part of the truck. I am trying to use a small jeweler screwdriver but I can't seem to get it in between the metal and the plastic cover. I am doing this to the front of the truck. What is the best way to open them? I am afraid of being too rough and breaking the plastic cover. Any help will be much appreciated. I've done a search on the web to see if there are any pictures on how to do that, but came up empty. Thanks in advance, - Peter. ---------------------------------------------------------- Peter Vanvliet ([email protected]) http://www.fourthray.com/ http://www.fourthray.com/Peter/ Houston, Texas ---------------------------------------------------------- [Non-text portions of this message have been removed] [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[email protected] mailto:[email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
