I am trying to change out the wheelset of my new SHS NW2. I have never done one of these. I am following the instructions and I have removed the coupler. I now need to gain access to the wheels to replace them. The plastic cover at the bottom of the truck supposedly snaps onto the metal support of the truck. I can see how that is done.
However, what I can't figure out is how to get that plastic cover to snap *off* of the metal part of the truck. I am trying to use a small jeweler screwdriver but I can't seem to get it in between the metal and the plastic cover. I am doing this to the front of the truck. What is the best way to open them? I am afraid of being too rough and breaking the plastic cover. Any help will be much appreciated. I've done a search on the web to see if there are any pictures on how to do that, but came up empty. Thanks in advance, - Peter. ------------------------------------------------------------ Peter Vanvliet ([email protected]) http://www.fourthray.com/ http://www.fourthray.com/Peter/ Houston, Texas ------------------------------------------------------------ [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: mailto:[email protected] mailto:[email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
