Now that the Mr. Lane has posted up good photos of the coach ends I
realize that I not only must remove the peak at the roof but the angled
portions of the ends also. Not only will I have to do that remodeling but I'll
have to make patterns and cast some of those Taylor passenger trucks to go with
the car.
The SHS car has 6 splice plates along the sides of the car and the READING
only had 5 but I think I will have to live with that. Removing them and
repositioning them is a little bit on the difficult side of things for me so
maybe I should just let them be.
My plans are to make a new floor from brass sheet and then apply the
details. i do nnot pln and using the solid brass castings for the boxes though,
I'll make mine from sheet stock so they are hollow.
Since I live in my own little world i am not aware of anyone that has
plastic interiors, but, the crow flew overhead the other day and was yaking
something about someone that did. Is this true?
Rusty
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
