Also, memorize this motto: "Let the speed of the tool do the work." Don't push, or you'll have to order cutoff disks in bulk.
I get the best cut by resting the motor part on the track and rocking the cutting tool down into the rail. -Michael Eldridge --- In [email protected], "ctxmf74" <ctxm@...> wrote: > > > > --- In [email protected], "Jeff Ngowe" <chocolatte777@> wrote: > > I purchased a black & decker rotary tool off of amazon for $30, it >should > > be arrive tomorrow. > > Jeffrey Ngowe > > > > Before you try to gap a real switch practice on some scrap track. Due to > the body diameter of the tool It takes an angled plunge cut to get the > thinnest gap (using small thin disks). Also wear good eye protection as lots > of rail metal and wheel dust gets thrown off when cutting.....dave > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
