--- In [email protected], Edward Sauers <ehsauers1@...> wrote:
>
> Bud,
> Â
> If you take the top of the supplied coupler box and cut away the top inside
> the box walls this gives you just the 2 sides and back walls and also allows
> the coupler to sit higher in the opening, takes about 5 minutes for each box.
> Â
> Ed Sauers
>
> Ed, Thanks for the tip, but I have already done the bolster mods. It also
> sat too high overall, looked weird with too much "air" between the trucks and
> the body.
Bud Rindfleisch
> ________________________________
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
