--- In [email protected], Bill Rigsby <silvergost1@...> wrote:
>
> If you guage wheels in between the maximum, and minimum is the track guaged
> spot on, including the curves?
There's so much margin for error in S scale standards that if the wheels fit
the gauge and the track fits the gauge nothing will fall off as long as the
trucks roll correctly with all wheels contacting the rails and the trucks free
to swivel and tilt a bit when needed( this assumes layout radius and grade
consistent with needs of rolling stock)
Start with the track, build it to fit the range allowed by the standards
gauge, check each car for gauge compliance and running quality and then there
will be no de-railments unless something breaks....DaveBranum
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
