<*>[Attachment(s) from Bob Werre included below] As I promised before the holiday weekend, I would attach a photo of the freight car parts formerly produced for a kit that the Houston S Gaugers were in the process of producing. I would assume, at this point, that more could be made.
As you can see the parts are sharply detailed and the car end has the uncoupler bar bracket, the brake bell crank, poling pockets and the connection for the airline all attached. The bolster coupler pocket piece was designed for the Kadee #5 coupler. I cut these and used them individually where needed. Bob Werre PhotoTraxx <*>Attachment(s) from Bob Werre: <*> 1 of 1 Photo(s) http://groups.yahoo.com/group/S-Scale/attachments/folder/170848656/item/list <*> HSGparts.jpg ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
