Hi Ed; Nah, just not up on car parts!
That appears to be 4/5 Dreadnaught end, also available in S on the 10' IH 40 ft AAR boxcar models. The American Models car and the 50 ft PRS cars have Improved Dreadnaught Ends (IDE). Pieter E. Roos --- On Wed, 9/5/12, Ed Kozlowsky <[email protected]> wrote: From: Ed Kozlowsky <[email protected]> Subject: Re: {S-Scale List} Freight car parts To: "[email protected]" <[email protected]> Date: Wednesday, September 5, 2012, 1:40 PM I know I'm dumb as a post, but what kind of end is that? Ed KozlowskySanford, Mainesscale.org From: Bob Werre <[email protected]> To: [email protected] Sent: Wednesday, September 5, 2012 1:27 PM Subject: Re: {S-Scale List} Freight car parts [1 Attachment] As I promised before the holiday weekend, I would attach a photo of the freight car parts formerly produced for a kit that the Houston S Gaugers were in the process of producing. I would assume, at this point, that more could be made. As you can see the parts are sharply detailed and the car end has the uncoupler bar bracket, the brake bell crank, poling pockets and the connection for the airline all attached. The bolster coupler pocket piece was designed for the Kadee #5 coupler. I cut these and used them individually where needed. Bob Werre PhotoTraxx
