Just for you info I have had a 8' x 24.5' flat/gondola for years in Sn3. Paul Vaughn PVC
________________________________ From: David Heine <[email protected]> To: 'S-Scale' <[email protected]> Sent: Friday, April 12, 2013 2:17 PM Subject: RE: {S-Scale List} Sn42 Thanks Don, The width works out to about 8’-4”, so they should work for an Sn42 car. I see that they are narrower than Bachmann’s “standard” On30 cars which scale out close to standard gauge width in S. Dave Heine Easton, PA From:[email protected] [mailto:[email protected]] Sent: Friday, April 12, 2013 3:41 PM To: S-Scale; David Subject: Re: {S-Scale List} Sn42 David, The flat, gondola and tank car are all built on the same body. I can't locate my scale rule right now - so these are actual dimensions. The flat cars are 1-9/16" across the deck and 1-11/16" across the stake pockets. The they are 4-5/8" long over the wooden buffer plates (deck is 4-1/2" long). The gondola sides and tank are not glued - they lift off easily. fmg: aka Don Munsey, Jr.
