Jim, Thanks for the report on the AT1000. I’ve been curious to try them, especially since they are cheaper! And hello to the Hoosiers: I’ll not be going back there this year. The trip sounds like great fun!
Roger nulton From: raisinone Sent: Sunday, June 09, 2013 7:37 AM To: [email protected] Subject: {S-Scale List} Re: FNF on Saturday We'll, the project has actually covered more than a Saturday night ... I picked up a DL&W AM U25b and have been setting it up for scale couplers and DCC to run in consist with a U33c. I had hoped to add an SD40-2 to the consist but the speed curves are so far apart I haven't explored it further. For now I'll have to remain hopeful there is an SD45 in the S scale's future. I've been doing DCC diesel installations with Tsunami TSU AT1000 decoders rather that the standard Tsunami with the pigtail wire harness. I would really recommend them for installations where you can fix the decoders location before wiring begins. They present a much easier and clearer wiring "picture"! Other than my installations of LokSound decoders, I don't think I use any pigtail-style decoders anymore at least in diesels... Have a good week; I'm off to a food safety conference and then 4 full days of railfanning in Indiana and Ohio on the former NYC and B&O main lines to Chicago. Of course they are NS and CSX now but still see train frequencies in the range of 150+ per day. I've been photographing trains from the same "personal" bridge location in Indiana now off and on since 1978. Looking forward to the break... Jim Kindraka Plymouth, WI http://groups.yahoo.com/group/S-Scale/photos/album/1226119013/pic/1863278758/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc --- In mailto:S-Scale%40yahoogroups.com, "scale S only" <scalesonly@...> wrote: > > For this week's fun ... <Skip> > Have fun! > Bill Winans >
