Bill, Seeing as these "wood grained" cars trap air under the decal, one thing you might want to try if you decide to do another one.....put a small puddle of Future floor finish where the decals are to go then place the decal.The Future sucks the decal down into any grooves, depressions, etc. I saw this done on a model airplane and the decals snuggled right down into the flap/wing joints. The Future can be applied over the decal too once dry and when all that is dry you can Dullcote or flat finish. Bud Rindfleisch
--- In [email protected], "scale S only" <scalesonly@...> wrote: > > Hi Guys (and gals, if there are any) -- > > For this week âs fun I decaled an orange undec SHS reefer. (photo) > This was a project that was much more difficult than it appeared. Those > cars have âgrainâ in the boards the catch air under the decal. It took > days of shredding the decals and hitting them with Microsol over and over > again to finally get out all the trapped air. ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
