Hi Steve -- I saw those. Quite nice!
Have fun! Bill Winans ------------------------------- You've been given some great solutions to the bubbling issue. I will chime in by saying that I have done 5 of the SHS billboard reefers. On one I used a dry transfer, and had no issues with any bubbles, but on the others where I used water soluable decals I use a small straight pin and carefully poke tiny holes in the film. I then go back over the decal with Microsol applying with a very soft medium to long bristle paint brush (short bristle has a tendency to tear the decal film). I will also use a Q-tip dipped in the setting solution and dab it careflly on the affected area, much like you would if you were stippling paint. I will then let the solution dry and see how much of the decal film is actually sucked into the grooves of the wood paneling. If need be, I will repeat the process. I uploaded 3 photos in the photo section the other day under the heading of Undec. SHS Billboard Reefers. Also, as a hint, weathering and dull kote can also help hide tiny air bubbles up to a point. Good Luck, Steven Allen
