On Sat, 4 Feb 2023, 13:51 'Nasser M. Abbasi' via sage-release, < [email protected]> wrote:
> "Was it an incremental build. If so, > make distclean > and > build again from scratch." > > It was not an incremental build. I extracted the gzip file and did the > steps I showed. So I do not need to do "make distclean" since everything is > new. > > But I repeated now everything again using "make distclean" and got same > error. > > "Probably the problem is linking with openblas. Do you have a number of > openblas versions accessible to the linker?" > > I have no idea. What command should I use to check? > > I am just following the instruction to download and install sagemath. > > I have giac and maxima and fricas and texlive already installed on this > virtual box already. I also have sagemath 9.7 installed in different folder. > sage in a different directory which is in your PATH typically breaks things. > --Nasser > > > On Saturday, February 4, 2023 at 5:27:59 AM UTC-6 Dima Pasechnik wrote: > >> Hello, >> Was it an incremental build. If so, >> make distclean >> and >> build again from scratch. >> >> Anyhow, if you look in your istall.log you'll see problems with a number >> of packages, e.g. fpylll, scipy. >> >> [sagemath_doc_html-none] [manifolds] ImportError: >> /home/me/TMP/sage-9.8.rc0/local/var/lib/sage/venv-python3.10/lib/python3.10/site-packages/scipy/special/_ufuncs.cpython-310-x86_64-linux-gnu.so: >> undefined symbol: dstevr_ >> >> Probably the problem is linking with openblas. Do you have a number of >> openblas versions accessible to the linker? >> >> >> >> By the way, >> what are you trying to achieve with exporting >> MAXIMA ? >> Sage does not support using external Maxima at the moment, >> >> >> >> >> On Sat, 4 Feb 2023, 08:12 'Nasser M. Abbasi' via sage-release, < >> [email protected]> wrote: >> >>> I get this error on Linux virtual box running >>> >>> lsb_release -a >>> LSB Version: n/a >>> Distributor ID: ManjaroLinux >>> Description: Manjaro Linux >>> Release: 22.0.0 >>> Codename: Sikaris >>> >>> After extracting the gzip file, these are the commands I did >>> >>> unset SAGE_ROOT >>> unset SAGE_LOCAL >>> export GIAC=/usr/local/bin/giac >>> export MAXIMA=/usr/local/bin/maxima >>> ./configure --with-system-python=no >>> make >>> >>> At the end I see >>> >>> ------------- >>> sagemath_doc_html-none] File >>> "/home/me/TMP/sage-9.8.rc0/src/sage_docbuild/sphinxbuild.py", line 263, in >>> raise_errors >>> [sagemath_doc_html-none] raise OSError(self._error) >>> [sagemath_doc_html-none] OSError: >>> /home/me/TMP/sage-9.8.rc0/src/sage/manifolds/chart.py:docstring of >>> sage.manifolds.chart.RealChart.plot:104: WARNING: Exception occurred in >>> plotting chart-1 >>> [sagemath_doc_html-none] >>> [sagemath_doc_html-none] Note: incremental documentation builds >>> sometimes cause spurious >>> [sagemath_doc_html-none] error messages. To be certain that these >>> are real errors, run >>> [sagemath_doc_html-none] "make doc-clean doc-uninstall" first and >>> try again. >>> [sagemath_doc_html-none] make[6]: *** [Makefile:28: >>> doc-inventory--reference-manifolds] Error 1 >>> [sagemath_doc_html-none] make[5]: *** [Makefile:45: >>> doc-inventory-reference] Error 2 >>> make[4]: *** [Makefile:3262: sagemath_doc_html-SAGE_DOCS-no-deps] Error 2 >>> make[3]: *** [Makefile:3262: >>> /home/me/TMP/sage-9.8.rc0/local/var/lib/sage/installed/sagemath_doc_html-none] >>> Error 2 >>> make[2]: *** [Makefile:2766: all-start] Error 2 >>> make[2]: Leaving directory '/home/me/TMP/sage-9.8.rc0/build/make' >>> >>> real 71m30.833s >>> user 103m7.355s >>> sys 5m48.306s >>> *************************************************************** >>> Error building Sage. >>> >>> The following package(s) may have failed to build (not necessarily >>> during this run of 'make all-start'): >>> >>> It is safe to delete any log files and build directories, but they >>> contain information that is helpful for debugging build problems. >>> WARNING: If you now run 'make' again, the build directory of the >>> same version of the package will, by default, be deleted. Set the >>> environment variable SAGE_KEEP_BUILT_SPKGS=yes to prevent this. >>> ---------------------------- >>> >>> The following folder <https://12000.org/tmp/sagemath_logs/> contains >>> config.log and install.log files >>> >>> Thank you >>> --Nasser >>> >>> >>> >>> >>> >>> >>> On Friday, February 3, 2023 at 3:40:20 AM UTC-6 Dima Pasechnik wrote: >>> >>>> On Fri, Feb 3, 2023 at 7:33 AM Sébastien Labbé <[email protected]> >>>> wrote: >>>> > >>>> > >>>> > >>>> > On Thursday, February 2, 2023 at 7:37:27 PM UTC+1 >>>> [email protected] wrote: >>>> > On Thursday, February 2, 2023 at 9:30:30 AM UTC-8 Sébastien Labbé >>>> wrote: >>>> > ./bootstrap: 9: m4: Permission denied >>>> > make: *** [Makefile:365 : configure] Erreur 1 >>>> > >>>> > Do you have "." in PATH? >>>> > >>>> > >>>> > No >>>> > >>>> > What does "which m4" say? >>>> > >>>> > >>>> > It returns nothing! Thanks for the hint. I found the problem: when >>>> reading the sage README to install sage from scratch on this new machine, I >>>> installed the basic stuff as follows: >>>> > >>>> > $ sudo apt install gcc gfortran g++ make m4 perl ranlib tar bc >>>> > [...] >>>> > E: Impossible de trouver le paquet ranlib >>>> > >>>> > But this returned an error on ranlib and I assumed it had installed >>>> the other packages in the list but no, it did not (gcc, gfortran, etc. were >>>> not installed as well). >>>> > >>>> > Is ranlib really needed for sage? Can we remove it from the README? >>>> >>>> ranlib is a standard tool, and is used by various build systems. On >>>> Debian it's a part of binutils package. >>>> >>>> README is not platform-specific, and it does not tell you to install >>>> *package* called ranlib. >>>> However, we should add there an advice to look for what packages to >>>> install in >>>> build/pkgs/_prereq/distros/ >>>> (e.g. for Debian it's in build/pkgs/_prereq/distros/debian.txt) >>>> >>>> (Once our GitHub is live in few days, it's a very quick PR to do :-)) >>>> >>>> >>>> >>>> > >>>> > >>>> > >>>> > -- >>>> > You received this message because you are subscribed to the Google >>>> Groups "sage-release" group. >>>> > To unsubscribe from this group and stop receiving emails from it, >>>> send an email to [email protected]. >>>> > To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/sage-release/d6aecaee-279a-45f8-a645-36483d72a382n%40googlegroups.com. >>>> >>>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "sage-release" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/sage-release/4a516a44-b761-4f02-ac10-e121cadc54d3n%40googlegroups.com >>> <https://groups.google.com/d/msgid/sage-release/4a516a44-b761-4f02-ac10-e121cadc54d3n%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > You received this message because you are subscribed to the Google Groups > "sage-release" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/sage-release/4d86cb2d-8c03-4101-904e-21a1a1ce8b93n%40googlegroups.com > <https://groups.google.com/d/msgid/sage-release/4d86cb2d-8c03-4101-904e-21a1a1ce8b93n%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "sage-release" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/sage-release/CAAWYfq1wL7KVJ-qtqXF1Dzp344qYSq%2Bb-HXWUkqYCmR7S%2Besag%40mail.gmail.com.
