I didn't think that I needed to. When getif connectes if show the APC information. So I don't know what (if anything) I'm doing wrong..
Thanks.. At 01:23 PM 7/24/03 -0500, you wrote: >Did you download the MIB from APC for your version. For the IP address >checking the IP is actually part of the OID. If you walk the MIB it >looks like the OID is 1.3.6.1.2.1.4.20.1.1.x.x.x.x where x is the IP >address of the unit. For your Second OID that should be 'up' try >putting a .1 after the OID. So that it reads 1.3.6.1.2.1.2.2.1.7.1 > >Hope This helps > >Nate > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >Behalf Of gene Martinez >Sent: Wednesday, July 23, 2003 5:04 PM >To: [EMAIL PROTECTED] >Subject: Re: [SA-list] SNMP > > > >I'm trying to set-up an SNMP check with Salive. >The OID is 1.3.6.1.2.1.4.20.1.1 it should equal 192.168.001.012 I can't >seem to enter the OID correctly as when I click the check button it said >it's not correct . So what am I doing wrong? > >I also tried 1.3.6.1.2.1.2.2.1.7 should equal up >this also didn't work? > >These are for my APC ups and I got the info (OID's) from using getip. > >Thanks >Regards, > >Gene > [EMAIL PROTECTED] > http://www.eclipse.net/~njkat >To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] >With the following in the body of the message: > unsubscribe SAlive > >To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] >With the following in the body of the message: > unsubscribe SAlive > > Regards, Gene [EMAIL PROTECTED] http://www.eclipse.net/~njkat To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
