If you're using Getif and you load the MIB, it will show you in plain English what APC Specific OID's are available. They'll be under the Mbrowser in Hierarchical fashion. You should be able to download the APC MIB from here http://www.apcc.com/tools/download/software_comp.cfm?sw_sku=sdw99.3.6.0 To load it into getif, browse to the installed MIB directory in the getif directory. Copy the extracted file powernet360.mib into this directory and rename it to a .txt extension. Then delete the file .index and reopen getif. It will rebuild the .index file to include this new MIB. You can then browse to it in the Mbrowser under .iso.org.dod.internet.private.enterprises.apc and it will allow you to walk most of the variables that you can SNMP, it will also show you the full OID of the variable at the bottom of the screen.
Hope this helps Nate -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of gene Martinez Sent: Friday, July 25, 2003 8:28 AM To: [EMAIL PROTECTED] Subject: RE: [SA-list] SNMP I didn't think that I needed to. When getif connectes if show the APC information. So I don't know what (if anything) I'm doing wrong.. Thanks.. At 01:23 PM 7/24/03 -0500, you wrote: >Did you download the MIB from APC for your version. For the IP address >checking the IP is actually part of the OID. If you walk the MIB it >looks like the OID is 1.3.6.1.2.1.4.20.1.1.x.x.x.x where x is the IP >address of the unit. For your Second OID that should be 'up' try >putting a .1 after the OID. So that it reads 1.3.6.1.2.1.2.2.1.7.1 > >Hope This helps > >Nate > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On >Behalf Of gene Martinez >Sent: Wednesday, July 23, 2003 5:04 PM >To: [EMAIL PROTECTED] >Subject: Re: [SA-list] SNMP > > > >I'm trying to set-up an SNMP check with Salive. >The OID is 1.3.6.1.2.1.4.20.1.1 it should equal 192.168.001.012 I can't >seem to enter the OID correctly as when I click the check button it >said it's not correct . So what am I doing wrong? > >I also tried 1.3.6.1.2.1.2.2.1.7 should equal up >this also didn't work? > >These are for my APC ups and I got the info (OID's) from using getip. > >Thanks >Regards, > >Gene > [EMAIL PROTECTED] > http://www.eclipse.net/~njkat >To unsubscribe from a list, send a mail message to >[EMAIL PROTECTED] With the following in the body of the message: > unsubscribe SAlive > >To unsubscribe from a list, send a mail message to >[EMAIL PROTECTED] With the following in the body of the message: > unsubscribe SAlive > > Regards, Gene [EMAIL PROTECTED] http://www.eclipse.net/~njkat To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive
