THANKS!!! I'll give it a try.
At 10:30 AM 7/25/03 -0500, you wrote:
>If you're using Getif and you load the MIB, it will show you in plain
>English what APC Specific OID's are available. They'll be under the
>Mbrowser in Hierarchical fashion. You should be able to download the
>APC MIB from here
>http://www.apcc.com/tools/download/software_comp.cfm?sw_sku=sdw99.3.6.0
>To load it into getif, browse to the installed MIB directory in the
>getif directory. Copy the extracted file powernet360.mib into this
>directory and rename it to a .txt extension. Then delete the file
>.index and reopen getif. It will rebuild the .index file to include
>this new MIB. You can then browse to it in the Mbrowser under
>.iso.org.dod.internet.private.enterprises.apc and it will allow you to
>walk most of the variables that you can SNMP, it will also show you the
>full OID of the variable at the bottom of the screen.
>
>Hope this helps
>
>Nate
>
>-----Original Message-----
>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
>Behalf Of gene Martinez
>Sent: Friday, July 25, 2003 8:28 AM
>To: [EMAIL PROTECTED]
>Subject: RE: [SA-list] SNMP
>
>
>I didn't think that I needed to. When getif connectes if show the APC
>information. So I don't know what (if anything) I'm doing wrong..
>
>Thanks..
>
>At 01:23 PM 7/24/03 -0500, you wrote:
>>Did you download the MIB from APC for your version. For the IP address
>>checking the IP is actually part of the OID. If you walk the MIB it
>>looks like the OID is 1.3.6.1.2.1.4.20.1.1.x.x.x.x where x is the IP
>>address of the unit. For your Second OID that should be 'up' try
>>putting a .1 after the OID. So that it reads 1.3.6.1.2.1.2.2.1.7.1
>>
>>Hope This helps
>>
>>Nate
>>
>>-----Original Message-----
>>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On
>>Behalf Of gene Martinez
>>Sent: Wednesday, July 23, 2003 5:04 PM
>>To: [EMAIL PROTECTED]
>>Subject: Re: [SA-list] SNMP
>>
>>
>>
>>I'm trying to set-up an SNMP check with Salive.
>>The OID is 1.3.6.1.2.1.4.20.1.1 it should equal 192.168.001.012 I can't
>>seem to enter the OID correctly as when I click the check button it
>>said it's not correct . So what am I doing wrong?
>>
>>I also tried 1.3.6.1.2.1.2.2.1.7 should equal up
>>this also didn't work?
>>
>>These are for my APC ups and I got the info (OID's) from using getip.
>>
>>Thanks
>>Regards,
>>
>>Gene
>> [EMAIL PROTECTED]
>> http://www.eclipse.net/~njkat
>>To unsubscribe from a list, send a mail message to
>>[EMAIL PROTECTED] With the following in the body of the message:
>> unsubscribe SAlive
>>
>>To unsubscribe from a list, send a mail message to
>>[EMAIL PROTECTED] With the following in the body of the message:
>> unsubscribe SAlive
>>
>>
>Regards,
>
>Gene
> [EMAIL PROTECTED]
> http://www.eclipse.net/~njkat
>To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
>With the following in the body of the message:
> unsubscribe SAlive
>
>To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
>With the following in the body of the message:
> unsubscribe SAlive
>
>
Regards,
Gene
[EMAIL PROTECTED]
http://www.eclipse.net/~njkat
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
