All the electronics have arrived, but when I connect it all up, there is no
My disk light flashes on power up and when I push the f9 key, but no video
Is it possible I need a special SCART cable (I have seen one on eBay)?
I am running out of ideas as to what could be wrong.
From: owner-sam-us...@nvg.ntnu.no [mailto:owner-sam-us...@nvg.ntnu.no] On
Behalf Of Simone Voltolini
Sent: Tuesday, December 26, 2017 10:43 AM
Subject: R: Advice requested
That HDMI upscaler is PERFECT for Sam/Speccy/ZX81/QL 😉
I use it for all 4 machines 😉
Kora Sistemi Informatici
Via Cavour 1, 46030 San Giorgio di Mantova MN
Tel/Fax +39 0376 371059
P. IVA: 02048930206
Da: <mailto:owner-sam-us...@nvg.ntnu.no> owner-sam-us...@nvg.ntnu.no [
<mailto:owner-sam-us...@nvg.ntnu.no> mailto:owner-sam-us...@nvg.ntnu.no] Per
conto di Jason Thacker
Inviato: martedì 26 dicembre 2017 16:34
A: <mailto:firstname.lastname@example.org> email@example.com
Oggetto: Advice requested
Thanks to some generous relatives, I have had my Sam shipped over from the UK
to the USA (where I now live).
Voltage is not a concern, step up converters are cheap on Amazon. But I would
like to be able to display the image from the Sam on my TV and unfortunately
SCART sockets were never put on American TVs.
What would be the best option for converting the SCART to an HDMI connector?
Would something like this be OK?
Any help/advice gratefully accepted.