You need a special Scart cable. The wiring is in the manual. Alternative is
the Composite Video and Audio signal from the Power socket.

On Mon, Jan 15, 2018 at 9:19 PM, Jason Thacker <jjthac...@gmail.com> wrote:

> All the electronics have arrived, but when I connect it all up, there is
> no video signal.
>
>
>
> My disk light flashes on power up and when I push the f9 key, but no video
> signal.
>
>
>
> Is it possible I need a special SCART cable (I have seen one on eBay)?
>
>
>
> I am running out of ideas as to what could be wrong.
>
>
>
> Thanks,
>
>
>
> Jason
>
>
>
> *From:* owner-sam-us...@nvg.ntnu.no [mailto:owner-sam-us...@nvg.ntnu.no] *On
> Behalf Of *Simone Voltolini
> *Sent:* Tuesday, December 26, 2017 10:43 AM
> *To:* sam-users@nvg.ntnu.no
> *Subject:* R: Advice requested
>
>
>
> That HDMI upscaler is PERFECT for Sam/Speccy/ZX81/QL 😉
>
>
>
> I use it for all 4 machines 😉
>
>
>
>
>
>
>
>
>
>
>
> Kora Sistemi Informatici
>
> Via Cavour 1, 46030 San Giorgio di Mantova MN
> Tel/Fax +39 0376 371059
> P. IVA: 02048930206
>
>
>
>
>
>
>
>
>
>
>
> *Da:* owner-sam-us...@nvg.ntnu.no [mailto:owner-sam-us...@nvg.ntnu.no
> <owner-sam-us...@nvg.ntnu.no>] *Per conto di *Jason Thacker
> *Inviato:* martedì 26 dicembre 2017 16:34
> *A:* sam-users@nvg.ntnu.no
> *Oggetto:* Advice requested
>
>
>
> Thanks to some generous relatives, I have had my Sam shipped over from the
> UK to the USA (where I now live).
>
>
>
> Voltage is not a concern, step up converters are cheap on Amazon. But I
> would like to be able to display the image from the Sam on my TV and
> unfortunately SCART sockets were never put on American TVs.
>
>
>
> What would be the best option for converting the SCART to an HDMI
> connector? Would something like this be OK?
>
>
>
> https://www.amazon.com/CiBest-Converter-Adapter-Support-Set-
> top/dp/B06Y43RVLH/ref=sr_1_3?ie=UTF8&qid=1514302351&sr=8-3&
> keywords=scart+to+hdmi+converter
>
>
>
> Any help/advice gratefully accepted.
>
>
>
> Thanks,
>
>
>
> Jason
>

Reply via email to