I use the scart -> HDMI system and its lovely From: owner-sam-us...@nvg.ntnu.no [mailto:owner-sam-us...@nvg.ntnu.no] On Behalf Of Stephen Longhurst Sent: 30 January 2018 16:35 To: sam-users <sam-users@nvg.ntnu.no> Subject: Re: Advice requested
Out of interest, did that HDMl converter work in the end? I have tried several over the years and none have been able to lock onto a SAM SCART output. They were less sophisticated models by the looks of it though. I still use an old TV, but I think it's on it's way out! Regards, Steve On 16 January 2018 at 05:58, <stefan_schomb...@agilent.com<mailto:stefan_schomb...@agilent.com>> wrote: True, the SAM SCART cable is a special one. Either you make one yourself or you order from Colin (http://www.samcoupe.com/). I once managed to reverse an original SAM cable and did not pay attention to the labels “TV” and “SAM”. This also lead to a black screen. Regards, Stefan From: owner-sam-us...@nvg.ntnu.no<mailto:owner-sam-us...@nvg.ntnu.no> [mailto:owner-sam-us...@nvg.ntnu.no<mailto:owner-sam-us...@nvg.ntnu.no>] On Behalf Of Leszek Chmielewski Sent: Monday, January 15, 2018 11:52 PM To: sam-users@nvg.ntnu.no<mailto:sam-users@nvg.ntnu.no> Subject: Re: Advice requested You need a special Scart cable. The wiring is in the manual. Alternative is the Composite Video and Audio signal from the Power socket. On Mon, Jan 15, 2018 at 9:19 PM, Jason Thacker <jjthac...@gmail.com<mailto:jjthac...@gmail.com>> wrote: All the electronics have arrived, but when I connect it all up, there is no video signal. My disk light flashes on power up and when I push the f9 key, but no video signal. Is it possible I need a special SCART cable (I have seen one on eBay)? I am running out of ideas as to what could be wrong. Thanks, Jason From: owner-sam-us...@nvg.ntnu.no<mailto:owner-sam-us...@nvg.ntnu.no> [mailto:owner-sam-us...@nvg.ntnu.no<mailto:owner-sam-us...@nvg.ntnu.no>] On Behalf Of Simone Voltolini Sent: Tuesday, December 26, 2017 10:43 AM To: sam-users@nvg.ntnu.no<mailto:sam-users@nvg.ntnu.no> Subject: R: Advice requested That HDMI upscaler is PERFECT for Sam/Speccy/ZX81/QL 😉 I use it for all 4 machines 😉 Kora Sistemi Informatici Via Cavour 1, 46030 San Giorgio di Mantova MN Tel/Fax +39 0376 371059<tel:+39%200376%20371059> P. IVA: 02048930206 Da: owner-sam-us...@nvg.ntnu.no<mailto:owner-sam-us...@nvg.ntnu.no> [mailto:owner-sam-us...@nvg.ntnu.no] Per conto di Jason Thacker Inviato: martedì 26 dicembre 2017 16:34 A: sam-users@nvg.ntnu.no<mailto:sam-users@nvg.ntnu.no> Oggetto: Advice requested Thanks to some generous relatives, I have had my Sam shipped over from the UK to the USA (where I now live). Voltage is not a concern, step up converters are cheap on Amazon. But I would like to be able to display the image from the Sam on my TV and unfortunately SCART sockets were never put on American TVs. What would be the best option for converting the SCART to an HDMI connector? Would something like this be OK? https://www.amazon.com/CiBest-Converter-Adapter-Support-Set-top/dp/B06Y43RVLH/ref=sr_1_3?ie=UTF8&qid=1514302351&sr=8-3&keywords=scart+to+hdmi+converter Any help/advice gratefully accepted. Thanks, Jason -- Steve Longhurst