Hi, Unfortunately I haven't so much money for this developer KIT. Can I program a Cryptoflex card completely with linux ? Which cards can I use without any developement Kit under Linux ?
Thank you for your help. Andi On Mon, 3 Jun 2002, R. Timothy Stewart wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Andi, > > I use the Schlumberger Cyberflex Software Development Kit Version 4.2 > available for purchase on Schlumberger's home page. A description can be > found at http://www.cyberflex.com/Products/SDK_4_2/sdk_4_2.html. > Unfortunately, it is expensive (~350 USD). > > I know it is theoretically possible to generate the .jar file needed for > upload with just Sun's Javacard API. It may also be possible to upload the > final .cap file to the card using the ADPU's defined in the Cyberflex Access > 32K Card Programming Guide, available at > http://www.cyberflex.com/Support/Documentation/CyberflexPG_4-2.pdf (using a > Load command followed by an Install command). It seems the only missing > piece is that you have to use the Schlumberger SDK to change the .jar file > into a .cap file. > > Can somebody on the list confirm this? This is what I have experienced, and > I decided to shell out the cash for the SDK in the end. > > - -TimS > > On Monday 03 June 2002 06:39 am, you wrote: > > Hi, > > > > Which Software do you use for Applet uploading ? > > Are there a Linux software avaiable for the > > 32K Cards ? The standard PINS and Codes must > > be anywhere in the Applet source code. > > > > Have a nice day, > > > > Andi > > > > On Sun, 2 Jun 2002, R. Timothy Stewart wrote: > > > Hello all, > > > > > > I have successfully loaded the Musclecard applet to my Cyberflex > > > Access 32k, and I can connect to it through xcard. My question is this - > > > what is the default pin number for pin 0? And what is the default > > > unblock code? I've searched everywhere I can think of and cannot find > > > this information. Thanks for your help! > > > > > > -TimS > > > > > > *************************************************************** > > > Unix Smart Card Developers - M.U.S.C.L.E. > > > (Movement for the Use of Smart Cards in a Linux Environment) > > > http://www.linuxnet.com/ > > > To unsubscribe send an email to [EMAIL PROTECTED] with > > > unsubscribe sclinux > > > *************************************************************** > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1.0.6 (GNU/Linux) > Comment: For info see http://www.gnupg.org > > iD8DBQE8+1mRiVOvtq6zN2IRAmkXAJ9g6rNdWvG1HWYhE2QpdaYg30wEtgCgjvhL > Vow1ImYspaQK1YkAq3+NvOM= > =ESnO > -----END PGP SIGNATURE----- > > *************************************************************** > Unix Smart Card Developers - M.U.S.C.L.E. > (Movement for the Use of Smart Cards in a Linux Environment) > http://www.linuxnet.com/ > To unsubscribe send an email to [EMAIL PROTECTED] with > unsubscribe sclinux > *************************************************************** > -- ----------------------------------------------------------------------- LISCON GmbH http://www.liscon.com/ Kersche Andreas [EMAIL PROTECTED] Richard-Wagner-Strasse 7 Tel: +43 699/11093881 A-9500 Villach Fax: +43 4242 214 855 99 AUSTRIA / EUROPE *************************************************************** Unix Smart Card Developers - M.U.S.C.L.E. (Movement for the Use of Smart Cards in a Linux Environment) http://www.linuxnet.com/ To unsubscribe send an email to [EMAIL PROTECTED] with unsubscribe sclinux ***************************************************************
