2012/4/26 ale rimoldi <ale.comp_06 at xox.ch> > hi richard > > > Thanks for your reply and I believe you understand me correctly. The > > 6mm is LSI recommendations for bleed, although the actual cutting > > error/drift over edge is expected to be 2mm. The 3mm inside glueing > > area now sounds like a potential problem. > > > > If I, in turn, understand you correctly, my pages will have 3mm > > 'lost' from their inside edges, because of the glue. If this is the > > case, then I should probably have realized this before I started. > > Every page will be visibly 3mm thinner than planned, and offset > > slightly. >
Right. This is exactly that. > > no, not really... if i understand you correctly. you use the margins as > you want to see them, and set the bleeds in file > document setup to > get the extra margins. > Ale, what happens is there is a portion of the actual finished page that disappears into the binding (3 mm). This is not bleed. It?s within the page?s limits, not outside them. I hope you can visualize this with my explanation. Maybe easier to grasp when you actually see the binding process. Louis > hth > a.l.e -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.scribus.net/pipermail/scribus/attachments/20120426/47657622/attachment.html>
