2012/4/26 Gregory Pittman <gpittman at iglou.com> > On 04/26/2012 01:33 AM, Richard Foley wrote: > >> Hi Louis, >> >> Thanks for your reply and I believe you understand me correctly. The 6mm >> is LSI >> recommendations for bleed, although the actual cutting error/drift over >> edge is >> expected to be 2mm. The 3mm inside glueing area now sounds like a >> potential >> problem. >> >> If I, in turn, understand you correctly, my pages will have 3mm 'lost' >> from >> their inside edges, because of the glue. If this is the case, then I >> should >> probably have realized this before I started. Every page will be visibly >> 3mm >> thinner than planned, and offset slightly. >> >> > It seems like what you need to do is reset the page size (correct me if > I'm wrong, Louis) to add this 3mm, unless LSI will automatically compensate > for this with their paper choice. >
Hi Greg, I think I got your question answered in the email I just sent (our emails where almost sent at the same time!). I have to rush now but will be back online later today. Louis > > Greg > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.scribus.net/pipermail/scribus/attachments/20120426/c6384f1d/attachment.html>
