Hi Greg and Louis, Yep, ok. I think I just have to "allow" the 3mm to disappear, by adjusting my permitted margins inwards to move slightly away from the glued area. Another case of RTFM :-)
-- Ciao Richard Foley http://www.rfi.net/books.html On Thu, Apr 26, 2012 at 08:28:16AM -0400, Gregory Pittman wrote: > On 04/26/2012 01:33 AM, Richard Foley wrote: > >Hi Louis, > > > >Thanks for your reply and I believe you understand me correctly. The 6mm is > >LSI > >recommendations for bleed, although the actual cutting error/drift over edge > >is > >expected to be 2mm. The 3mm inside glueing area now sounds like a potential > >problem. > > > >If I, in turn, understand you correctly, my pages will have 3mm 'lost' from > >their inside edges, because of the glue. If this is the case, then I should > >probably have realized this before I started. Every page will be visibly 3mm > >thinner than planned, and offset slightly. > > > > It seems like what you need to do is reset the page size (correct me > if I'm wrong, Louis) to add this 3mm, unless LSI will automatically > compensate for this with their paper choice. > > Greg > > > ___ > Scribus Mailing List: scribus at lists.scribus.net > Edit your options or unsubscribe: > http://lists.scribus.net/mailman/listinfo/scribus > See also: > http://wiki.scribus.net > http://forums.scribus.net
