Hi,Louis The discussion on page measures must be colocated in right place. The page edges measures that you had setting was set in wrong place. The adequate panel for measures of a booklet (glued at internal edges) it is the "layout document") located into "File">"Document settings" . In this place, we must selected the second icon layout (imaging a page spread) and no the first (imaging a page simple). Then the measures have to change for "internal" anda "external" edges. Excuse: I wish sincerely my hope to be better than my english... Luiz
________________________________ From: Louis Desjardins <louis.desjardins at gmail.com> To: Scribus User Mailing List <scribus at lists.scribus.net> Sent: Thursday, April 26, 2012 9:31 AM Subject: Re: [scribus] perfect bound 3mm gutter question/problem? 2012/4/26 Gregory Pittman <gpittman at iglou.com> > On 04/26/2012 01:33 AM, Richard Foley wrote: > >> Hi Louis, >> >> Thanks for your reply and I believe you understand me correctly. The 6mm >> is LSI >> recommendations for bleed, although the actual cutting error/drift over >> edge is >> expected to be 2mm. The 3mm inside glueing area now sounds like a >> potential >> problem. >> >> If I, in turn, understand you correctly, my pages will have 3mm 'lost' >> from >> their inside edges, because of the glue. If this is the case, then I >> should >> probably have realized this before I started. Every page will be visibly >> 3mm >> thinner than planned, and offset slightly. >> >> > It seems like what you need to do is reset the page size (correct me if > I'm wrong, Louis) to add this 3mm, unless LSI will automatically compensate > for this with their paper choice. > Hi Greg, I think I got your question answered in the email I just sent (our emails where almost sent at the same time!). I have to rush now but will be back online later today. Louis > > Greg > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.scribus.net/pipermail/scribus/attachments/20120426/c6384f1d/attachment.html> ___ Scribus Mailing List: scribus at lists.scribus.net Edit your options or unsubscribe: http://lists.scribus.net/mailman/listinfo/scribus See also: http://wiki.scribus.net http://forums.scribus.net -------------- Pr?xima Parte ---------- Um anexo em HTML foi limpo... URL: <http://lists.scribus.net/pipermail/scribus/attachments/20120426/1279ffce/attachment.html>
