Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
liffy99 wrote: > > Can someone tell me where I am going wrong ? > Thanks Hi, had similar problems. It was my complex wifi SID password. Please test it with an easy one like 12345 if it works. Logitech Media Server Version: 7.9.0 - 1470912157 on Ubuntu 14.04 LTS (vmware) with 2 cores and 2048 MB -> cifs share to Synology DS1815+ (36 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Raspberry PI included Hifiberry Denon x4000 + ANAVIEW AMS1000 + B 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
great work. I use it from the beginning and all new versions better than previous one. Short question from my side. Is it possible to implement a VPN client? I will explain why. Sometimes, if I visit friends, I miss my music. I have a special rasp that includes a VPN client and squeezelite. The VPN dial into my network and the squeezelite connect to my LMS. With that combination, I can hear my music everywhere. I only need a LAN cable. That function is really nice and I miss it in piCorePlayer. Logitech Media Server Version: 7.9.0 - 1470912157 on Ubuntu 14.04 LTS (vmware) with 2 cores and 2048 MB -> cifs share to Synology DS1815+ (36 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Raspberry PI included Hifiberry Denon x4000 + ANAVIEW AMS1000 + B 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
Hi, that AV Receiver includes an USB-DAC. Have somebody test this? Sound it good and is workable with picoreplayer? Logitech Media Server Version: 7.9.0 - 1454910773 on Ubuntu 14.04 LTS (vmware) with 2 cores and 2048 MB -> cifs share to Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Raspberry PI included Hifiberry Denon x4000 + ANAVIEW AMS1000 + B 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
Hi, I take a look inside the DAC compatibility list and cannot find the ibasso DX80. Can somebody test this DAC? I want to buy this to use it as a HD Audio player and DAC. Logitech Media Server Version: 7.9.0 - 1454910773 on Ubuntu 14.04 LTS (vmware) with 2 cores and 2048 MB -> cifs share to Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Raspberry PI included Hifiberry Denon x4000 + ANAVIEW AMS1000 + B 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
Hi, don't know if someone else had ask this. Buy a Pi3 to play a little bit with. Use latest 2.04 image but build in wifi will not be running. Can setup everything and a scan will see my access point (fritzbox) but get no connection. Screen told me Error for wireless request "Set ESSID" (8B1A) : too few arguments Any idea? Logitech Media Server Version: 7.9.0 - 1454910773 on Ubuntu 14.04 LTS (vmware) with 2 cores and 2048 MB -> cifs share to Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Raspberry PI included Hifiberry Denon x4000 + ANAVIEW AMS1000 + B 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
Hi, I had also a problem in the past with wifi connection. Anything looks fine but piCore cannot connect. At the end it was the wifi password. I uses "http://www.google.de; as the wifi password and that doesn't work. After using a different one like "www.google.de" its working. For me it looks like picore cannot handle "/" in the correct way. Logitech Media Server Version: 7.9.0 - 1454910773 on Ubuntu 14.04 LTS (vmware) with 2 cores and 2048 MB -> cifs share to Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Raspberry PI included Hifiberry Denon x4000 + ANAVIEW AMS1000 + B 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 2.00
Hi, I am using piCorePlayer since long time ago. Its a great piece of software. Thanks for that. Right now I saw a strange behavior with original raspberry touch screen and want to know if other people have same issue. (its not related to picore!!!) The touchscreen having two flat cable to connect the screen. One of them (small one) is for the touch capability. I get today the second time the error that my touch function doesn't work correct. First time the flat cable was disconnected (several month before). Today it has a bad connection and the display doesn't work correct. I open the case and plugin the cable again and its now working fine. It looks for me that the flat cable slide out of the connection after several weeks/month. I fix the cable right now with a piece of Tesa. Have some other people saw that? Logitech Media Server Version: 7.9.0 - 1454910773 on Ubuntu 14.04 LTS (vmware) with 2 cores and 2048 MB -> cifs share to Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Raspberry PI included Hifiberry Denon x4000 + ANAVIEW AMS1000 + B 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=105018 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelit
As you can see in my edit2 problem is resolved. I make every time an insitu-upgrade update and reinstall jive after update. Here is a picture of the connection that was not propper 19472 +---+ |Filename: picore.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=19472| +---+ Logitech Media Server Version: 7.9.0 - 1406814226 on a Core2 Duo with SSD Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Raspberry PI included Hifiberry Denon x4000 + ANAVIEW AMS1000 + B 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelit
Get same problem with touch screen. After update to 1.22 the touch doesn't work. Very frustrated. With Build 1.21g touch works fine. Any idea what is to do? Logitech Media Server Version: 7.9.0 - 1406814226 on a Core2 Duo with SSD Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Raspberry PI included Hifiberry Denon x4000 + ANAVIEW AMS1000 + B 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelit
Hi and congrats. New version is runnign fine with Touch display. Thanks...:-) Logitech Media Server Version: 7.9.0 - 1406814226 on a Core2 Duo with SSD Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Raspberry PI included Hifiberry Denon x4000 + ANAVIEW AMS1000 + B 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCorePlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelit
Hi, one short question. Is there a plan to include the driver for the original Raspberry Pi Touch Display into picore? That can be a good alternative for jivelite and in compination an alternative to Squeezebox touch. thx Logitech Media Server Version: 7.9.0 - 1406814226 on a Core2 Duo with SSD Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Wandboard Denon x4000 + 2x ANAVIEW ALC0300-1300 + B 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCoPlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelite
I am really fascinated about the huge range of possible DAC solutions. The IFI nano iDSD sounds good. But the Teak UD501 sounds also good. Have anybody experience with this DAC? Sorry for that many questions, but this costs so much more than a RASP and I want to make sure to get the best for the money:-) thx Logitech Media Server Version: 7.9.0 - 1406814226 on a Core2 Duo with SSD Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Wandboard Denon x4000 + 2x ANAVIEW ALC0300-1300 + BW 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCoPlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelite
Hi, right now I have a working combo with hifiberry and rasp running. Sounds goog but better is the enemy of good. I think to buy an iFi nano iDSD and want to know if somebody can told me if this is a good combination and if the RPi2 is better as the RPi in this combination? I saw that the iFi nano iDSD is in the USB-DAC list but don't know if there is a different between RPi2 and RPi. Thanks for feedback. Logitech Media Server Version: 7.9.0 - 1406814226 on a Core2 Duo with SSD Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Wandboard Denon x4000 + 2x ANAVIEW ALC0300-1300 + BW 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCoPlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelite
I add two additional comments to my first post. I am sure you can answer one of them. Can you control the volume with LMS without loosing quality? thx Logitech Media Server Version: 7.9.0 - 1406814226 on a Core2 Duo with SSD Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Wandboard Denon x4000 + 2x ANAVIEW ALC0300-1300 + BW 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCoPlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelite
Hi, I doesn't use hidden SID. SID is: JuSt Password is like: http://www.google.de Logitech Media Server Version: 7.9.0 - 1406814226 on a Core2 Duo with SSD Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Wandboard Denon x4000 + 2x ANAVIEW ALC0300-1300 + BW 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCoPlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelite
Hi, I tried latest version and first 1.19. Every time the same. Strange thing is, after plug in LAN and Wifi I am able to use both. So I open a ssh with putty, login and type dmesg and get following: Code: [2.978713] usb 1-1.3: new high-speed USB device number 4 using dwc_otg [3.080439] usb 1-1.3: New USB device found, idVendor=7392, idProduct=7811 [3.080473] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [3.080490] usb 1-1.3: Product: 802.11n WLAN Adapter [3.080506] usb 1-1.3: Manufacturer: Realtek [3.080522] usb 1-1.3: SerialNumber: 00e04c01 So its same version as that one is running. iwconfig shows me Code: wlan0 IEEE 802.11bgn ESSID:JuSt Nickname:WIFI@REALTEK Mode:Managed Frequency:2.462 GHz Access Point: E8:94:F6:F9:AB:9D Bit Rate:150 Mb/s Sensitivity:0/0 Retry:off RTS thr:off Fragment thr:off Power Management:off Link Quality=100/100 Signal level=64/100 Noise level=0/100 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 But after I unplug the LAN connection wifi also drop and I lost my ssh connection Logitech Media Server Version: 7.9.0 - 1406814226 on a Core2 Duo with SSD Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Wandboard Denon x4000 + 2x ANAVIEW ALC0300-1300 + BW 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCoPlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelite
Hi, I use fing to see whats going on in my network. After connecting LAN and go to Web config I setup wifi. At console I make an iwconfig and ifconfig. I see that wifi is established and wifi gets an IP address. I make a cat to /etc/wpa_supplicant.conf and see here my wifi configuration. After reboot without lan the /etc/wpa_supplicant.conf is empty* and wifi doesn't work. Than I connect LAN again and wait until eth0 gets an IP. Than I start the web config page, go to wifi, wait until available wifi networks are shown, configure my wifi again and press safe. After a few seconds wlan is online and gets an IP. I see that with ifconfig an iwconfig. From that point I can start a ssh and web config session over wlan IP. Now /etc/wpa_supplicant.conf contains again my configuration. But this is only working if I have also a LAN connection. Without LAN nothing is working. This is the empty /etc/wpa_supplicant.conf Code: tc@piCorePlayer:/etc$ cat wpa_supplicant.conf # reading passphrase from stdin Passphrase must be 8..63 characters tc@piCorePlayer:/etc$ Logitech Media Server Version: 7.9.0 - 1406814226 on a Core2 Duo with SSD Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Wandboard Denon x4000 + 2x ANAVIEW ALC0300-1300 + BW 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCoPlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelite
Hi, I am fully frustrated. I try to bring my RPi2 online with EDIMAX EW-7811UN but it failed. I read several posts and hints but nothing will be helped. Sometimes the wifi is online but only if I boot it together a LAN connection. I need some hints. Somebody had wrote that Edimax is running but it isn't (03-04-2015EDIMAX EW-7811UNWorking 1.19 (RPI2 Version)hsmeets). Is there anybody with an RPi2 and WLAN USB dongle combination that is working? Thanks Logitech Media Server Version: 7.9.0 - 1406814226 on a Core2 Duo with SSD Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Wandboard Denon x4000 + 2x ANAVIEW ALC0300-1300 + BW 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCoPlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelite
Hi, I ordered the new Audiophonics - DAC PCM5102 I2S DAC 32bit/384Khz Raspberry PI that includes IR receiver. Knows somebody if this feature will be supported in the future? thx Logitech Media Server Version: 7.9.0 - 1406814226 on a Core2 Duo with SSD Synology 1512+ (15 TB) 1x Touch - 1x Receiver - 2x Boom - 1x Radio + Wandboard Denon x4000 + 2x ANAVIEW ALC0300-1300 + BW 803 Diamond + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS F19 Release 1
Hi, I get yesterday the CSOS-Wandboard-Quad-F19-R2-20130910-1.img.7z image and was a little bit unhappy because it doesn't fit at my 8GB card. So I need to bought a bigger one. So I bought it from the dealer nearby and start the tests. I run several FLAC and MP3 and everything runs fine except HD Files. Files with 24/96 are down-sampled to 48KHz. I connect the Wandboard via HDMI. The funny thing is, DTS Multi-Channel files runs perfect. Any tips for me? Thx LMS 7.7.2 - r33908 (Vortexbox 2.0) W2K8R2 DE (AMD 1060T/4GB/1x1TB RAID1 + 1x6TB RAID5) 1x Touch - 1x Receiver - 2x Boom - 1x Radio Denon 3808 + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=99395 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS F19 Release 1
Try setting the max rate to 192000, via the web-gui squeezelite config page, Save and Conditionally Restart. I don't use HDMI audio out myself, so anyone else feel free to jump in. That resolves the problem...:-) LMS 7.7.2 - r33908 (Vortexbox 2.0) W2K8R2 DE (AMD 1060T/4GB/1x1TB RAID1 + 1x6TB RAID5) 1x Touch - 1x Receiver - 2x Boom - 1x Radio Denon 3808 + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=99395 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Community Squeeze OS F19 Release 1
Hi, I try to download http://www.communitysqueeze.org/images/wandboard/CSOS/F19-R2/CSOS-Wandboard-Quad-F19-R2-20130910-1.img.7z but I get always: Error 403 You don't have permission to access /images/wandboard/CSOS/F19-R2/CSOS-Wandboard-Quad-F19-R2-20130910-1.img.7z on this server. Thanks for your help LMS 7.7.2 - r33908 (Vortexbox 2.0) W2K8R2 DE (AMD 1060T/4GB/1x1TB RAID1 + 1x6TB RAID5) 1x Touch - 1x Receiver - 2x Boom - 1x Radio Denon 3808 + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=99395 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCoPlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelite
Hi, If ordered a HiFiBerry board and will get them a try. I will give feedback later. Thanks for the hint about that pretty nice solution. LMS 7.7.2 - r33908 (Vortexbox 2.0) W2K8R2 DE (AMD 1060T/4GB/1x1TB RAID1 + 1x6TB RAID5) 1x Touch - 1x Receiver - 2x Boom - 1x Radio Denon 3808 + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCoPlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelite
Hi, is there a way to start squeezeplay (jive) to get an display? I don't need the audio function, but its nice to have the screen from squeezeplay. I connect the HDMI to my AVR and use it for audio and video. I small information with cover which song is running will be fine. thx LMS 7.7.2 - r33908 (Vortexbox 2.0) W2K8R2 DE (AMD 1060T/4GB/1x1TB RAID1 + 1x6TB RAID5) 1x Touch - 1x Receiver - 2x Boom - 1x Radio Denon 3808 + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCoPlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelite
Hi, is it possible that the bit perfect issue comes from the following? .CHANNELS_MAX = 2 Code: High resolution audio through HDMI: Thanks to the suggestion from giantpopples from the squeezbox forum and the work by tghewett from the raspberry pi forum it is now possible to stream high resolution audio through the HDMI cable. Before the raspberry pi would down-sample everything to 48 kHz. But we modified the bcm2835-pcm.c and build the kernel. Now it is possible to stream 88.1 kHz and 96 kHz through HDMI. It might be possible even to use up to 192 kHZ, but I have not received any report on this. Original: .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_48000, .rate_min = 8000, .rate_max = 48000, .channels_min = 1, .channels_max = 2, Changed to: .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE, .rates = SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_8000_192000, .rate_min = 8000, .rate_max = 192000, .channels_min = 1, .channels_max = 2, LMS 7.7.2 - r33908 (Vortexbox 2.0) W2K8R2 DE (AMD 1060T/4GB/1x1TB RAID1 + 1x6TB RAID5) 1x Touch - 1x Receiver - 2x Boom - 1x Radio Denon 3808 + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCoPlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelite
Fiatelis wrote: I would suggest that you edit /opt/bootlocal.sh (100 = 100%) and either run filetool.sh -b or use the picoplayer setup program to make the changes persistent. Works for me. Good point to look at /opt/bootlocal.sh. It is 100. That looks like 87 for PCM. With amixer I can see that max value is 400. I setup it to 400 ( amixer set PCM 400 unmute )and voila it is now 100%. That error is resolved. But not the error with multi channel flac that are playable in the original SB Touch. So I will see if somebody find a solution:-) LMS 7.7.2 - r33908 (Vortexbox 2.0) W2K8R2 DE (AMD 1060T/4GB/1x1TB RAID1 + 1x6TB RAID5) 1x Touch - 1x Receiver - 2x Boom - 1x Radio Denon 3808 + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCoPlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelite
Hi, thanks for the hint. I run alsamixer and setup 100%. I try to safe this value with sudo alsactl store but after a reboot its not 100%. Any hint? I also try it before a reboot with 100% but I get only a white noise. LMS 7.7.2 - r33908 (Vortexbox 2.0) W2K8R2 DE (AMD 1060T/4GB/1x1TB RAID1 + 1x6TB RAID5) 1x Touch - 1x Receiver - 2x Boom - 1x Radio Denon 3808 + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCoPlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelite
Hi, I play a little bit with the 1.06 version. A really nice piece of soft and hardware. I play some files in 24/192 over HDMI without problems. I try also some DTS flac files that runs with my touch without a problem but with pico I only hear white noise. Normally this error occur if the sound volume is not 100%. I check the setup in LMS but this looks good. Under player setup in LMS the output is fix to 100%. Is there a setting under pico to resolve this error. Have somebody play DTS or AC3 files with pico and get no error? LMS 7.7.2 - r33908 (Vortexbox 2.0) W2K8R2 DE (AMD 1060T/4GB/1x1TB RAID1 + 1x6TB RAID5) 1x Touch - 1x Receiver - 2x Boom - 1x Radio Denon 3808 + Elac FS247 Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] piCoPlayer = Squeezelite on Microcore linux. .An embedded OS in RAM with Squeezelite
hi, a short question. Is it possible to put the output what song is playing (also cover) to the hdmi? Like squeezeplayer. That can be a nice feature..:-) Stefan LMS 7.7.2 - r33908 (Vortexbox 2.0) W2K8R2 DE (AMD 1060T/4GB/1x1TB RAID1 + 1x6TB RAID5) 1x Touch - 1x Receiver - 2x Boom - 1x Radio 'Denon 3808' (http://www.zemlicka.de/gallery/Diverses/neues-Wohnzimmer/P1040371) + 'Dynaudio Axis 5' (http://www.zemlicka.de/gallery/Diverses/Axis-5) Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=97803 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
[SlimDevices: Unix] squeezeplay and .asoundrc ubuntu 10.10
Hi, I need a little bit help. I am to stupid. I want to run squeezeplay at an ubuntu 10.10 system. I get no sound over the hdmi interface. With aplay -D plughw:0,3 test.wav I have sound. But I am to stupid to configure the system that this is the default sound device and used by squeezeplay. please help thx -- Mr. Floppy Mr. Floppy's Profile: http://forums.slimdevices.com/member.php?userid=29772 View this thread: http://forums.slimdevices.com/showthread.php?t=84870 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
