¡Hola a todos!
¿Conocéis algún libro/manual dedicado a la programación en C++
(que no en ANSI C) bajo Linux? Especialmente, me interesaría que tratase
el tema de programación de drivers, pero si es más general tampoco me
importa.
Muchas gracias a todos. Un saludo.
José Luis Ayala wrote:
¡Hola a todos!
¿Conocéis algún libro/manual dedicado a la programación en C++
(que no en ANSI C) bajo Linux? Especialmente, me interesaría que tratase
el tema de programación de drivers, pero si es más general tampoco me
importa.
Si no recuerdo mal
Seguramente ya lo habrás tenido en cuenta, pero bueno:
¿/dev/mouse/ apunta a algún sitio? Normalmente es un enlace simbólico.
Igual tienes que hacer que apunte al dispositivo edcuado (/dev/ttySX si
el serie, por ejemplo).
Un saludo.
On Tue, 10 Oct 2000, Alfredo Macias wrote:
Hola.
Podria
On Tue, 10 Oct 2000, Alberto F. Hamilton Castro wrote:
El Thu,21/Sep/2000 a las 22:27:47+0200, Lluis Vilanova escribió:
Siento volver a preguntar esto, pero ahora que un amigo me la va a bajar, en
ftp.gul.uc3m.es hay DOS directorios con los CDs de Debian
(imagenes_oficiales_debian y
On Tue, 10 Oct 2000, Sergio Valdivielso Gomez wrote:
buenas, hay alguan faq disponible en español, solo de debian?
doc-debian-es
(Sí, ya sé que la tengo que actualizar...).
Hola lista.
Tengo ganas de probar un irc en modo texto,
cual me recomiendan?
y que script? (de estos que te hacen la vida mas facil)
(Espero no haber empezado una flame-war)
Gracias
Gerard
Navegando por la red he encontrado este documento, que soluciona el
problema del router adsl 3com que venden los cabrones de telefonica,creo
que merece el interés general
»Telefónica vende su Router ADSL 3com Bloqueado.
Telefónica Data instala últimamente este router cuando se contrata
Thinking C++ lo podes encontrar en http://planetpdf.com
son dos volumenes y es muy bueno.
Angel Claudio Alvarez
[EMAIL PROTECTED]
Gcia de Tecnología
Banco Credicoop C.L.
+54(11)4891-5970
-Mensaje original-
De: José Luis Ayala [mailto:[EMAIL PROTECTED]
Enviado
On mié, oct 11, 2000 at 12:42:44 +0200, Santiago Vila wrote:
doc-debian-es
(Sí, ya sé que la tengo que actualizar...).
;-)
Si tu no puedes, mándalo a La Espiral que igual entre todos
podemos darle un empujón.
Es una pena porque la doc es realmente buena... pero un pelín antigua,
Hola lista !!! tengo un problemilla con el booteo de mi Debian, por
instalar un modem a mi pc tuvieron que formatear la particion donde
tengo win95 y ahora no puedo cargar Debian con lilo, con un diskette de
arranque puedo cargarlo pero al intentar configurar el lilo tengo los
siguientes
Enas.
Alguien de vosotros ha instalado shaper?
Quiero limitar ciertos puertos/servicios de salida mientras doy el máximo
de ancho de banda a otros... Se hace con shaper, verdad?
He estado buscando información de shaper y solo he encontrado howtos muy
breves, y no m'aclaro con el shapecfg, no sé
On Mon, 9 Oct 2000, Xose Manoel Ramos wrote:
¿Existe algún documento sobre seguridad dentro de la distribución
Potato? Es que normalmente Debian suele venir super documentada (Se
trae toda la Linux Journal) y paso de andar buscando en Internet lo
que tengo en los CD's. Lo que no sé es donde
Has probado a utilizar gpmconfig ??, puede ser una solucion sencilla a tu
problema , que en definitiva parece que como minimo es que no tienes hecho
el link de /dev/mouse a /dev/psaux ( ln -s /dev/psaux /dev/mouse
) contando con que tengas un mouse ps2 ( de ser serie lo mas probable es
que lo
--- cut ---
Date: Tue, 10 Oct 2000 20:54:41 +0200
From: Javier Cantero [EMAIL PROTECTED]
To: La Espiral [EMAIL PROTECTED]
Subject: Opera en .deb
Hola,
Acabo de leerlo en las news, una beta del navegador Opera en .deb.
Ya sabéis, no es libre (habría que mirar licencia de distribución,
Hola
Enas.
Alguien de vosotros ha instalado shaper?
Quiero limitar ciertos puertos/servicios de salida mientras doy el
máximo
de ancho de banda a otros... Se hace con shaper, verdad?
Creo que no, con shaper si te funciona que a mi no me funciono y me
pase para rshaper, lo que puedes limitar
Es posible que en el lilo.conf tengas una línea que diga
boot=/dev/hda2
y debiera decir
boot=/dev/hda
A mi me ha pasado y el comportamiento era parecido al que describes (en
mi caso tb. salía el mensaje de los 1024 cilindros, pero luego no tenía
nada que ver).
Sin embargo, sospecho que pueda no
El 02 de oct de 2000 a las 03:19:06 +0200, Hue-Bond escribió:
El domingo 01 de octubre de 2000 a la(s) 13:04:10 +0200, Antonio Castro
contaba:
[...]
Apuesto a que un usuario normalito no distingue un güindons +
word de un linux + staroffice.
[...]
---fin de la respuesta al
On Wed, Oct 11, 2000 at 02:10:33AM +0200, Javier Viñuales Gutiérrez wrote:
On mié, oct 11, 2000 at 01:50:21 +0200, ciro wrote:
que sucede si usas stable de Potato y te actualizas por apt-get a la
unstable pq es tan poco deseable una actualización a las bravas de
glibc ??? lo comentaba
Saludos a [EMAIL PROTECTED] :
Sabe alguien de alguna utilidad en Linux para
leer un disco duro sector por sector ?
Gracias.
Cesar.
Cesar Iriso Calle:
Sabe alguien de alguna utilidad en Linux para
leer un disco duro sector por sector ?
Prueba con dd.
Hola:
Tengo la grabadora mencionada en el subject. He leido en un pequeño manual
que he bajado de la Espiral, dode dice que para usar la grabadora ya no es
necesario compilar el kernel basta con añadir al final del lilo.conf
append=hdd=ide-scsi y despues modprobe ide-scsi.
Lo he echo y no
La pregunta que quiero hacer no tiene nada que ver con la lista, pero es
que no se donde preguntar.
El caso es que quiero la Solo Programadores Linux en que hay los Cds de
potato, y no la he encontrado en ningun quiosco (sabe alguien donde la
puedo encontrar en barcelona?), he ido a la pagina de
Hola lista, necesito un favor super urgente, en el
mensaje anterior solicite ayuda para configurar el
lilo ya que no booteaba desde mi disco duro, pues
resulta que carge Debian con rescue root=/dev/hda5 y
todo perfecto, revise el archivo lilo.conf y estaba
algo asi:
boot=/dev/hda2
root=/dev/hda5
Lo mas probable es que debe decir
boot=/dev/hda
Entra a linux dale un
lilo -u
(aca te repara la particion de windows)
luego modifica lilo.conf con la linea de arriba y corre lilo nuevamente.
Afortunada,ente lilo hace un backup de los sectores sobre los que escribe.
Xavier
Anarchy may not
modifica el lilo.conf
pone
other=/dev/hda1
label= win
En caso de que el hda1 tuviera win95
Que alguien me corrija si me falta algo (disculpen pero en estos momentos
estoy trabajando y no tengo linux)
Angel Claudio Alvarez
[EMAIL PROTECTED]
Gcia de Tecnología
Banco
Sí, mucha gente lo sabiamos, antes de que las voces suenen a gritos. Ahora lo
cambiarán y los que vengan despues se joderán. Las cosas se hacen con más
estilo que voceandolas. El que quiere algo, lo busca, no espera que alguien se
lo diga.
Enhorabuena para los que tienen ADSL por que ellos
--- Alvarez, Angel [EMAIL PROTECTED]
wrote:
modifica el lilo.conf
pone
other=/dev/hda1
label= win
ya hice esto y no funciona, no logro entrar a win95,
he usado el liloconfig ya varias veces y le he dado
lilo -u /boot/boot.0301 lilo -u /boot/boot.0302 y
nada, ya intente desinstalar el
Antes de nada, disculpas por responder a traves de una version
Guindous del Pegasus.
Sobre este tema, yo ya comente e hice varios articulos en la red
sobre esto, alla por el 97.
Razon? Simple, telefonica en ese momento compro una empresa
de xDSL americana, ya que el protocolo que usaba estaba
El Wed, Oct 11, 2000 at 04:48:32PM +0200, Jose Angel Fdez. Luengo escribió:
Hola,
Acabo de leerlo en las news, una beta del navegador Opera en .deb.
Ya sabéis, no es libre (habría que mirar licencia de distribución, pero
por si interesa para el segundo CD):
No, no es libre. Y la
Revisa que la particion de windows este como activa segun el fdisk de dos.
Cambiaste el lilo a boot=/dev/hda?
Xavier Andrade
Anarchy may not be a better form of government, but it's better than no
government at all.
On Wed, 11 Oct 2000, José Luis Castro wrote:
--- Alvarez, Angel [EMAIL
Alguien pregunto como quitar en /etc/passwd el shell pero de forma que no
entre a telnet pero a ftp si pueda entrar alguien que me pueda decir como
hacerle
--
INTRUDER A3
C Corp
-
Hola.
Estoy tratando de configurar mi Genius-Netmouse en Debian 2.2. con gpm le doy
gpm-test y detecta algo en el /dev/tty0 (mi mouse es serial) pero cuando me
pide que mueva el mouse y para finalizar presione una tecla.. no acepta nada
mas mi sistema.. ni pasarme a otra consola.. y ctrl+c
Creo que cambiando el shell (/bin/bash, p.ej.) por /dev/null.
Saludos.
Virgilio
On Wed, 11 Oct 2000, Lemus Moreno Jose A wrote:
Alguien pregunto como quitar en /etc/passwd el shell pero de forma que no
entre a telnet pero a ftp si pueda entrar alguien que me pueda decir como
hacerle
Creo que hoy si termine con mi maquina :((( hice lo
que me dijeron de fdisk /mbr pero no funciono porque
resulta que la particion de win95 es de formato
desconocido (deberia ser FAT16) cuando ejecuto el
fdisk veo la particion como primaria pero con formato
unknow me parece que hoy si termine de
Probe la recomendacion que me hizo virgilio pero no jalo
alguien que nos saque de la duda esta interesante el que no dar shell a
los usuarios, pero que puedan jalar el ftp.
--
INTRUDER A3
C Corp
-
To: debian-user-spanish@lists.debian.org
From: [EMAIL PROTECTED]
Date: Wed, 11 Oct 2000 15:30:26
Subject: ayuda com gpm
Hola.
Estoy tratando de configurar mi Genius-Netmouse en Debian 2.2. con gpm le doy
gpm-test y detecta algo en el /dev/tty0 (mi mouse es serial) pero cuando me
pide que
Jag vet inte riktigt om detta hör hit men jag har problem med
keyboardmappningen för Alt och Alt Gr i X. Vänster Alt fungerar som den ska
men höger Alt (Gr) mappas inte riktigt och X tolkar den lika som vänster
Alt, så jag kan inte skriva @-tecken eller |-tecken.
Jag kör X4.0 om det är till någon
Hej
Såhär ser min XF86Config ut.. (Jag kör inte X4.0)
Section Keyboard
ProtocolStandard
AutoRepeat 500 5
LeftAlt Meta
RightAltMeta
ScrollLock Compose
RightCtlControl
XkbKeycodes xfree86
XkbTypesdefault
XkbCompat
Muito boa mensagem! Ressaltou todos os pontos que estão sempre errados! =)
KoV
Em Ter, 10 Out 2000, Carlos Laviola escreveu:
Segue a mensagem que enviei ao caderno de Informática do jornal O Globo, e
que foi publicada nessa semana (dia 9/10), mas resumida. A mensagem abaixo
é a que enviei;
Tente recompilar o kernel com essa opção, não lembro bem onde fica lá no
make menuconfig.
Falou
Olá pessoal,
Eu possuo uma fonte ATX e quero saber como fazer com que o linux
desligue o micro no Shutdown.
Agradeço
Romero
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject
Ola Guilherme,
O problema que vc estah tendo eh o seguinte:
De acordo com o ´/drivers/char/lp.c´ (no kernel), algumas impressoras da HP e
EPSON tem um handshake baseado em interrupcoes. Este deve ser o seu caso. Para
isso, voce deve, primeiramente, habilitar a interrupcao na sua porta
O que me chateia é a superficialidade que as matérias de informática tem
hoje
em dia, tudo é voltado a M$ e publicam até 5 vezes como trocar um papel
de
parede no Windows... já no Linux todo mundo chama de difícil, mas porque
ninguém divulga como fazer as coisas simples (a não ser que o usuário
Ativando o APM na bios e escolhendo as opções padrões, já funciona
corretamente.
SILVIO JOSE COSTA SILVA wrote:
Tente recompilar o kernel com essa opção, não lembro bem onde fica lá no
make menuconfig.
Falou
Olá pessoal,
Eu possuo uma fonte ATX e quero saber como fazer com que o
Eu disse na bios mas o correto é na bios e no kernel :)
Gleydson Mazioli da Silva wrote:
Ativando o APM na bios e escolhendo as opções padrões, já funciona
corretamente.
SILVIO JOSE COSTA SILVA wrote:
Tente recompilar o kernel com essa opção, não lembro bem onde fica lá no
make
O que me chateia é a superficialidade que as matérias de informática tem
hoje
em dia, tudo é voltado a M$ e publicam até 5 vezes como trocar um papel
de
parede no Windows... já no Linux todo mundo chama de difícil, mas porque
ninguém divulga como fazer as coisas simples (a não ser que o
I have a box that provides network services to some other computers that is
running Potato. It accesses the internet via cable modem, using dhcpcd to
get its IP address. The problem I'm having is that it won't work unless I
run it with configuration options on the command line, although I have
On Wed, Oct 11, 2000 at 01:38:22PM +, Jamil Geor wrote:
Hi,
You could just use modconf to install the network card module that
you need.
Jamil
Thanks. It appears, however, that I didn't make the question very clear.
Just installing the module is not going to get the network
On Tue, 10 Oct 2000, Sven Burgener wrote:
Fellow debs,
o First, can anyone tell me if the book UNIX Power Tools is any good?
It's from O'Reilly. If not, what alternatives are there to it? Any other
book(s) one simply *must* own? :)
Topics: UNIX / Linux / Networking / C
Oct 11 00:08:36 isharagi dhcpcd[188]: timed out waiting for a valid DHCP
server response
It gets the address instantly if I start it as follows:
isharagi:/# dhcpcd -h (hostname)
Whereas just typing dhcpcd causes it to pause for a long time,
as it does
when it tries running it at boot
On Sat, Oct 07, 2000 at 07:14:16PM -0700, kmself@ix.netcom.com wrote:
On Sat, Oct 07, 2000 at 11:30:18AM +0200, Willi Dyck ([EMAIL PROTECTED])
wrote:
Hi all,
i wanna backup my whole system. which method do you recommand?
should i zip / or should i write an image of /dev/hdax?
i also
Further to an earlier request about hardware
Can anyone provide advice about the status of support for ATA-100
IDE controllers---more specifically, the Promise ATA-100 cards?
Is there support for these in the 2.2 series kernels, or in 2.4?
There seems to be some controversy about whether
I just reinstalled my debian system and upgraded to woody. Previously,
the equalizer in XMMS worked just fine - I could raise the bass, lower
the highs, mess with the preamp level. Now when I turn the eq on and
change the settings, there is no effect. My /dev/dsp is working to some
extent
I had been having lots of trouble with my unstable install and decided
to reinstall using libranet. It worked great, I've got sound, printing
and it was quick and painless. I did forget to copy the sources.list
and now I need to get the proper sources for apt. Could someone please
post them for
Sorry if this has been discussed before,
I can't get lilo to boot a windows partition which is after the 1024 cylinder.
I beleive that now it is able to, but...not sure how?
My lilo.conf is setup as follows:
boot=/dev/hda
root=/dev/hda5
install=/boot/boot.b
map=/boot/map
vga=normal
delay=20
On Fri, Oct 06, 2000 at 12:34:00AM +0200, Thomas Voss wrote:
Anyway, even if bind would run on the firewall box, the problem would
remain the same, i.e. bind would send a UDP packet which has to bring up
the line (forcing a new IP for the interface), and which therefore leaves
with the wrong
On Wed, 11 Oct 2000, Jack Morgan wrote:
Sorry if this has been discussed before,
I can't get lilo to boot a windows partition which is after the 1024 cylinder.
I beleive that now it is able to, but...not sure how?
I think LILO boots using BIOS, which can't reach disk space after the 1024
After starting xemacs with the -f gnuserv-start option I get the
following error message in xemacs when trying to run gnuclient -q
/tmp/somefile:
(error/warning) Error in process filter: (void-function
server-edit-files-quickly)
How do I correct this?
Johann
--
J.H. Spies - Tel/Faks
On Tue, Oct 10, 2000 at 10:48:57PM -0400, David Z Maze wrote:
Francois Fayard [EMAIL PROTECTED] writes:
FF I have compiled XF 4.0.1 in /usr/XF40 (I don't want XF 4.0.1 from Woody
FF because I run Potato). But now Gdm doesn't start the X server at boot time
FF and I don't know where I have to
Hi there ...
I'm using Perl to access a mysql db.
After the last upgrade Perl complained
that a shared lib wasn't found: libmysqlclient.so.9
According to apt-get I have the lastest
libmysqlclient9 package installed.
Even a symlink to libmysqlclient.so.10.0.0
didn't fix the problem.
What's
On Tue, Oct 10, 2000 at 12:38:07PM -0500, Pat Mahoney wrote:
Actually, installing xfonts-100dpi makes sawfish start, but menus still
don't work.
I mentioned in an earlier message to someone else with the same problem
that reading /usr/share/doc/sawfish/README.Debian will probably solve
your
Hello,
i tried apt-get install netatalk and the downloading seems OK but i got
several error messages after, what can i do now ?
On Tue, Oct 10, 2000 at 11:55:39PM -0700, Jeremiah Hunter Savage wrote:
I just reinstalled my debian system and upgraded to woody. Previously,
the equalizer in XMMS worked just fine - I could raise the bass, lower
the highs, mess with the preamp level. Now when I turn the eq on and
change
Compiling a file (which I used with Slink's Tetex had no problems)
produces an error code:
Loading the definitions for the Greek font encoding
(/usr/share/texmf/tex/generic/babel/lgrenc.def)
! Undefined control sequence.
\GenericError ...
#4 \errhelp
On Wed, Oct 11, 2000 at 11:04:32AM +0200, Jens Luedicke wrote:
Hi there ...
I'm using Perl to access a mysql db.
After the last upgrade Perl complained
that a shared lib wasn't found: libmysqlclient.so.9
According to apt-get I have the lastest
libmysqlclient9 package installed.
Even
Hi,
I'm currently backing up to DAT tapes on a building where there are
other companies...
There is a way to protect DAT backups in order to need a password for
restoring and reading ?
I'm using dump
thanks,
jaume
Could someone please explain, in idiot-level detail, how to get a .php
file to display correctly in Netscape.
I apt-get installed PHP4 (which included Apache) a few days ago. I've
started Apache okay with:
LoadModule php4_module /usr/lib/apache/1.3/libphp4.so
AddType application/x-httpd-php
On Wed, Oct 11, 2000 at 11:08:28AM +0200, EMMETROP wrote:
Hello,
i tried apt-get install netatalk and the downloading seems OK but i got
several error messages after, what can i do now ?
things like invalid argument or such from the kernel?
those would be caused if you don't have AppleTalk
On Wed, Oct 11, 2000 at 11:08:28AM +0200, EMMETROP wrote:
Hello,
i tried apt-get install netatalk and the downloading seems OK but i got
several error messages after, what can i do now ?
Be more precise : What kind of errors do you have ?
Francois
--
Unsubscribe? mail -s unsubscribe
Hi,
Maybe my question should be sent to another list, let me know then.
I know that this is a very active maillist so I'm not part of it, please
send a CC to me too, if you reply to this mail.
My question is why inetd is part of netbase. I would like to have a system
that don't run inetd but I
On Wed, Oct 11, 2000 at 02:10:58PM +0200, Magnus Sandberg wrote:
|Hi,
|
|Maybe my question should be sent to another list, let me know then.
|
|I know that this is a very active maillist so I'm not part of it, please
|send a CC to me too, if you reply to this mail.
|
|My question is why inetd is
Could someone please explain, in idiot-level detail, how to get a .php
file to display correctly in Netscape.
I apt-get installed PHP4 (which included Apache) a few days ago. I've
started Apache okay with:
LoadModule php4_module /usr/lib/apache/1.3/libphp4.so
AddType application/x-httpd-php
Hey,
I turned on my computer today, and I can only log
in to X, not the normal tty's. I hanve no idea what could have
happened. When I try to log on it says
Last login: Wed Oct 11 00:23:41
2000 on tty1
Debian/GNU Linux 2.2 tux
tty1
tux login:
Any clues?
Thanks,
Cameron Matheson
Someone told me yesterday that I have lousy modelines and that I should
run Xvidtune. My problem is that I navigated through many directories to
get to that, but then it doesn't execute when I type in that name? Says
command not found.
What you can do
is type "linux s" at the LILO prompt to get you to the shell without going to
the login process.
hth.
P.S. This
is my first time sending email from Outlook so if those console users get
anything ugly please say so and I'll adjust my settings. Yeah my Debian
box is still
On Wed, Oct 11, 2000 at 07:46:59AM +0200, Jan Martin Mathiassen wrote:
some dhcp servers apparently need you to add -h hostname for some obscure
reason (i don't know why, i just remember hearing something about that
somewhere), so i suggest you check out its config man file for the
On Wed, Oct 11, 2000 at 11:49:44AM +0200, Johann Spies wrote:
Compiling a file (which I used with Slink's Tetex had no problems)
produces an error code:
Loading the definitions for the Greek font encoding
(/usr/share/texmf/tex/generic/babel/lgrenc.def)
Hi!
I try installing using COMPACT floppy disk.(bin from the
woody/disk-i386/compact)
1) boot from rescue disk
2) insert root disk
3) kernel panic: VFS: unable to mount root fs on 02:00
What is wrong? Any help is appreciated. Thanks for reading.
My hardware:
SIS530
AMD K6-III 333/128MB
Hi!
Ignore my previous mail,
I try installing using COMPACT floppy disk.(bin from the
dist/potato/disk-i386/compact)
1) boot from rescue disk
2) insert root disk
3) kernel panic: VFS: unable to mount root fs on 02:00
What is wrong? Any help is appreciated. Thanks for reading.
My
Steve,
On 11 Oct 2000, at 13:35, Steve Simons wrote:
Could someone please explain, in idiot-level detail, how to get a .php
file to display correctly in Netscape.
I'm currently using PHP3 and my config files have similar stuff to
yours (but without the PHP4 bits, obviously enough).
(BTW,
I have no problems with [EMAIL PROTECTED] service and my DHCP service, albiet,
I use
the command line -h not config files. I've never had a problem at all except
for when the power goes out, then I have to power cycle the cable ethernet
bridge and then use dhcpcd -h hostname
I just put
dhcpcd
On Wed, 11 Oct 2000, Liam Ward wrote:
I'm currently using PHP3 and my config files have similar stuff to
yours (but without the PHP4 bits, obviously enough).
You're looking in the wrong place here. Netscape does not need to
know anything special to process PHP. It's Apache that spots
On Wed, Oct 11, 2000 at 02:56:49PM +, Steve Simons wrote:
Nope - that doesn't work either, it doesn't want to download it, but
nothing is displayed.
Are you sure your script is good? (Did you try a script with _just_
phpinfo() in it, plus exit;?)
Does apache have the php module loaded?
Hi,
Ofcause the most secure thing is to know what I do, but when you have a
number of machines to manage it can be hard to make notes of every change
from time to time.
What happends if I remove /etc/rc2.d/S20inetd, will APT/dpkg recreate the
link when I do a upgrade? When removing that link
For any version of linux i was wondering what the best chooose would be to
build a computer for home use. I have a p2 300mhz and was going to upgrade
to a 600mhz p2 or 700 mhz athlon processor and was wondering which is the
best to choose
Cavaiani, Don [EMAIL PROTECTED] writes:
Someone told me yesterday that I have lousy modelines and that I should
run Xvidtune. My problem is that I navigated through many directories to
get to that, but then it doesn't execute when I type in that name? Says
command not found.
'xvidtune',
By default, the current directory is NOT one of the places that the system
will look for an executable. Try giving it a complete pathname
/something/somthing/Xvidtune. Or cd to the directory and enter ./Xvidtune.
That specifies that the executable is in the current directory.
cheers,
dar
On
On Wed, 11 Oct 2000, Andrew Sullivan wrote:
Are you sure your script is good? (Did you try a script with _just_
phpinfo() in it, plus exit;?)
I'm now using PHP.net's own example:
html
head
titleExample/title
/head
body
?php
echo Hi,
Jason Hammerschmidt [EMAIL PROTECTED] writes:
I have no problems with [EMAIL PROTECTED] service and my DHCP service,
albiet, I use the command line -h not config files. I've never had
a problem at all except for when the power goes out, then I have to
power cycle the cable ethernet bridge and
My networking takes a while (maybe 30 seconds) to work again after the
machine wakes up from apm --suspend. I don't actually stop/start
/etc/init.d/networking, but if you try, say, a telnet immediately
after waking up the machine, you'll have to wait a while before
anything
Does anybody have a good working config for a pro-900 series monitior.
Thanks much for any help.
Damian Menscher [EMAIL PROTECTED] writes:
On Mon, 9 Oct 2000, Samuli Suonpaa wrote:
Umm... As you state, most applications asymmetric only for the key and
symmetric for data. How come you still consider symmetric encryption
to be faster?
I'm afraid I don't understand your question...
It
Hello,
For some testing I want to setup a telnet and/or an ftp connection to a remote
machine (I also have physical access to the remote machine).
Is it possible to setup such connection WITHOUT providing any username and
password.
(Basically I want to setup an unknown number of telnet and/or
Lars Bjarby [EMAIL PROTECTED] writes:
My crontab looks like this:
0,15,30,45 * * * /home/laban/bin/chkwww
It's not in all man page versions I have seen: you're probably just
missing a trailing Newline at the end of your crontab.
HTH,
Fx
--
Gravity. It's not a rule, it's the law!
[2000-10-11] Magnus Sandberg wrote:
IMHO it would be good to have inetd as its own package.
This is already the case with woody - netbase has been split.
(netbase still depends on netkit-inetd, at least until the dependencies
of other packages have been updated to reflect the split.)
Hi,
after upgrading to potato I have the following new problem:
My network card module eepro100.o is, as it should be, in
/lib/modules/2.2.14/net. I can load it by hand with insmod
eepro100.o, but modprobe gives the error message found in the subject
line. I tried to put the line
On Wed, Oct 11, 2000 at 03:52:43PM +, Steve Simons wrote:
I'm now using PHP.net's own example:
html
head
titleExample/title
/head
body
?php
echo Hi, I'm a PHP script!;
?
/body
/html
Yes,
Either one CPU should work well. Just pick your mobo well. What I have done in
the past is look at the system specs on VA's and penguincomputing's pages and
try to find out what they put in their systems. I have also emailed their sales
people and have been given the mobos that they use that
Well, I guess I _could_ use a shell script to start it, but it bothers me
that it used to work yet suddenly does not. The config files sure seem to
be written correctly. I have installed other packages since dhcpcd that
mess with network things, such as ssh and oidentd, but I don't see how this
I get many e-mail messages in my mailbox like the following:
On Thu Oct 5 12:19:44 2000, the user root was editing a
file named /proc/aironet/eth0/Config on the machine sirach,
when it was saved for recovery. You can recover most, if not
all, of the changes to this file using the -r option to
On Wed, 11 Oct 2000 15:10:50 Andrew Sullivan wrote:
called, either. I think you'd need to convince apache that php=php4,
by adding a line
application/x-httpd-php4 php
(and, I guess, adjusting the other line that includes php not to
include that extension). I might
1 - 100 of 200 matches
Mail list logo
