Tony wrote:
All,
Certainly is remarkable the way Olivia mode performs under adverse
conditions.
Was having trouble decoding VK2PN in PSK31 mode due to the unstable
conditions at the time (selective fading / multi-path).
Switching to Olivia 500/16 fixed the problem. Copy went from marginal
Benson wrote:
--- In digitalradio@yahoogroups.com, "Dave AA6YQ" <[EMAIL PROTECTED]> wrote:
On what basis do you claim that Olivia, DominoEX, and MFSK are
"better" than
PSK for ragchewing? Olivia is slow, and MFSK is difficult to tune.
I could care less about "mode envy" but I
garylinnrobinson wrote:
> If most PSK operators are interested in rag chewing -they need to move
> on to a better digital mode. PSK and RTTY are the two worst modes
> available. And that's the problem. Too many people, groups, and
> leaders in the Ham Community promoting OLD and less than effectiv
I am QRV 7035 LSB with FMDMV at various times during our (VK) afternoons.
14mh useless most of the time here, but VK2,3,7 usually good sigs on
forty in our afternoons.
Kevin VK5OA
Is there any default frequency for FDMDV on Forty meters
Kevin
VK5OA
Of late I have been having my ALE contacts with ZL1BAD destroyed by
VK2JN evidently running pactor II/III on 14109.5
He comes on, obviously without listening to see if the channel is clear.
Is 14109.5 a recognized frequency for BBS pactor operation? If so then
that frequency should be removed fro
Peter G. Viscarola wrote:
Is there any way that a second set of macro's (like in mixw) can be
used, or is there any way that the second 12 macro's can be locked on
screen, so that CTRL does not have to be pressed each time?
If what you're looking for is a way to have more buttons visible
acros ?
Andy
--- In digitalradio@yahoogroups.com, Kevin O'Rorke <[EMAIL PROTECTED]> wrote:
Since I have had no reply to this post and it may have gon astray I am
re-posting
Yesterday I decided that I would give a few numbers to the RTTY
contest,
and re-wrote a few of my exis
Since I have had no reply to this post and it may have gon astray I am
re-posting
Yesterday I decided that I would give a few numbers to the RTTY contest,
and re-wrote a few of my existing macro's for the exercise.
Is there any way that a second set of macro's (like in mixw) can be
used, or is
Yesterday I decided that I would give a few numbers to the RTTY contest,
and re-wrote a few of my existing macro's for the exercise.
Is there any way that a second set of macro's (like in mixw) can be
used, or is there any way that the second 12 macro's can be locked on
screen, so that CTRL does
Sholto Fisher wrote:
Tooner wrote:
MultiPSK gives an error in Vista 64-bit:
"Windows - No Disk
Exception Processing Message 0xc013 Parameters
...
Cancel, Try Again, Continue"
Selecting either will still pull up the program. Seems to work fine.
Not a biggie, but in case someone else is
Hello All
I have installed fdmdv_6_jan .
All seemed to set up ok.
I have 2 sound cards. Realtek ac97 on board which i have set for RX in
and TX out, and USB Creative SB Extigy forVoice in and Voice out.
If I put the mute right down I get random bits of voice sounding "gunk",
so that side of thing
Demetre SV1UY wrote:
Hi all,
Following this discussion I could help but notice the frontpage of
this group. It mentions DIGITALRADIO GROUP International.
--
DIGITALRADIO GROUP
A meeting place for discussion of amateur radio di
Jack Chomley wrote:
> I think these discussions about ALE who, PSK this, who hates Pactor
> etc are starting to destroy this group.
> We all have our favourite ideas/opinions etc. IF people feel strongly
> about regulatory or operational problems in the hobby, then write to
> your Ham Radio repr
I have VBDIGI/FLARQ up and running,and there has been a lot of posts
about 30m frequencies.
I do not have a 10Mh antenna so would like to know of frequencies for 14
and 7Mh, so that I can monitor/beacon in the right spots.
Kevin VK5OA
Maybe a bit off topic but I have placed this on "Linux hams" with no
reply, so apologies in advance.
This is the third time over 3 months that I have put a query on that
forum without a reply, maybe the group is dead.
I have downloaded pskmail_pup_w-0.5.5, installed and runs ok in windows.
I ca
Andrew O'Brien wrote:
On Jan 1, 2008 9:23 PM, kh6ty <[EMAIL PROTECTED]> wrote:
The NBEMS development team is pleased to announce the availability of a
Windows NBEMS software suite for beta testing.
I have downloaded NBEMSsetup and unzipped to a temp folder
Any attemp
I have downloaded "pskmail_pup_w-0.5.5.zip"
It has installed ok and runs ok on Win.
It has FLDIGI and FLARQ pre-installed. FLDIGI runs ok, but I cannot at
this stage get PTT working I aparently cannot nominate the correct com port.
The com port, in Windows, is com 3 (a PCI Com Card).
I will eventu
Ralph Mowery wrote:
--- Zack <[EMAIL PROTECTED]> wrote:
What is the standard rule for sidebands for the
digital modes? Are all
bands 160-6 USB (for RTTY, PSK, WSJT, etc)? I have
been looking for
this info but have not found it. A web link would be
very helpful!
Thanks
Zack
N8FNR
David wrote:
> Hi All..as this petition only has to do with Hams in the USA i would
> suggest that argument from both sides be taken to a group especially for
> the subject and not be put on the other many Hams outside the
> USA.this petition has already engendered some very bad slanging
>
Steve Hajducek wrote:
Hi Kevin,
I squeezed out support for com ports 1 through 16, older version were
com 1 through 9. The limitation is imposed by the Microsoft
supplied comm driver for the C++ compiler.
/s/ Steve, N2CKH
At 06:25 PM 12/11/2007, you wrote:
pcale 1.062H will only all
Steve Hajducek wrote:
> Hi John,
>
> If you are using PC-ALE 1.062H ( the latest build being #5) I can not
> imagine why you are having any issues with your TS-480SAT if the CAT
> control of radio works otherwise with any other software.
>
pcale 1.062H will only allow CAT control via COM1 and
Dave Bernstein wrote:
AA6YQ comments bloew
--- In digitalradio@yahoogroups.com, Jose Amador <[EMAIL PROTECTED]> wrote:
You've argued that the SCAMP busy detector is useless because
its not publicly available, even though it was developed by the
Winlink team and remains in their
Steve Hajducek wrote:
> Hi Kevin,
>
> You are using OLD software, you want the latest PC-ALE v1.062H
> Interim Build #5 which is found at the HFlink Yahoo forum.
>
>
No, Steve my version is 106g. Only downloaded it not that long ago.
Thanks for the tip, will investigate.
Kevin
Steve Hajducek wrote:
> Hi Kevin,
>
> If you select by model number from "Radio Type" you want your radio
> to be using the factory address and 19200 baud.
>
> If you use GENERIC ICOM, which I don't recommend, then you want to
> use the baud radio your is set to 8N1, the radio address your radio
I have been trying to get PCALE functioning with my IC706IIG.
I cannot get the CAT function to work ie. scanning etc.
Transmits (individual call) fine with PTT via com 1.
I have tried using the "Generic Icom" and entering the correct address
etc. and still no joy.
CAT works fine on "Commander" and
Kurt wrote:
> Don't know about anyone else, but I am tired of reading the messages
> between some here, and the bs that is passing back and forth.
>
> If you guys want to have a pissing contest, then why not do it with
> emails to each other, or take it to another forum.
>
> Kurt
> K8YZK
>
>
>
>
In Andy's excellent Bozo's Guide the suggested operating frequency on 40
for JT65 is 7076.
Here in this part of the world 7050 - 7100 is the main SSB operating
area and 7075 is a very popular mobile SSB operating frequency.
So we would, by Gentleman's agreement not operate JT65 on 7076
Main digit
First a bit of brag.
This afternoon on 20m
041300 1 -8 -0.1 -13 3 * CQ ZS6WAB KG461 10
041500 7 -6 -0.1 -11 3 # VK5OA ZS6WAB KG46 OOO 1 10
041700 10 -9 -11 4 RRR ?
041900 3 -8 -0.2 -11 3 * -16DB TU 30M
Totally Off subject, but every time I try to do a "reply", because of
all the @[EMAIL PROTECTED]&* add's on the right hand side of the message, it is
impossible to get my text in the right place.
is there any way of getting rid of those adds'??
Kevin
VK5OA
JOHN said
> I have this mental picture of linux users hunched over their
> computers, eyes red and glazed , looking for WMD (What Microsoft
> Did), toiling for hours to make unsupported software run.
>
> Sorry Guys, I'm with Bill Gates, he developed an operating system that
> mostly works, an
Hello Group
I wish to have the use of two sound cards,one for digital and the other
for less important uses, ie. win sounds.
Installing my Creative Live card is perfectly normal and successful, but
the onboard card is not present any more, I have checked in Device
manager, and only the Creative
I am just in the process of commissioning a new computer, an ASUS A8V
motherboard with AMD 3000+ cpu and 512mb ram
System is XP Pro with SP1
This motherboard has an on board Realtek AC97 sound card.
If I plug a Creative Live PCI sound card in, and boot up, the Live card
is found and installed ok
Due to the propagation conditions on 14mh being so consistently poor I
was wondering why no local (VK-ZL) digi activity is apparent on 7mh,
except for 7193 USB for Hampal etc, and 7038 for packet.
Here in VK the band allocation for digital is 7030-7040, and I will from
time to time be CQ'ing on D
Due to the propogation conditions on 14mh being so consistantly poor I
was wondering why no local (VK-ZL) digi activity is apparent on 7mh,
except for 7193 USB for Hampal etc, and 7038 for packet.
Here in VK
Dave Bernstein wrote:
> This seems like a slippery slope, Doc.
>
> Should the FCC have disallowed SSB because when it was first
> introduced, most hams didn't have SSB demodulators and thus couldn't
> self-police?
>
> .
>
>
In those days most ham receivers had a BFO and by using that, ssb could
KV9U wrote:
>Would love to hear of any on-going programming for HF ARQ sound card
>modes so if anyone does this or knows anything about it, please let us
>know.
>
>73,
>
>Rick, KV9U
>
>
>Andrew O'Brien wrote:
>
>
>
PAX2 in Multipsk??
VK5OA
Need a Digital mode QSO? Connect to Telnet:
DuBose Walt Civ AETC CONS/LGCA wrote:
> Yes sir...depending where the water table is.
>
> I measures the impedance of a 40M dipole laying on the Saudi desert
> floor and it was 50 ohms.
>
> In another place in the desert, it was 17 ohms. We dug down about
> 8-10 ft and found rocks and wet sand
I have been reading the posts on pax2 with great interest and I would
like to participate in experiments with it.
A lot is going on on Europe and the USA on frequencies and times which
we here in vk-zl cannot participate.
I wonder if there are any other Amateurs in this area with similar
though
expeditionradio wrote:
>>Kevin VK5OA
>>The program only uses one serial port for PTT and CAT when
>>ALL other programs use two or more. [...]
>>[...]
>>I would dearly love to use the program but until some other
>>author will take over the development (Charles has ceased
>>working on it)
>>
John Bradley wrote:
> I've tried tackling ALE a couple of times, and have given up in
> frustration.
>
> The lack of setup for Kenwood Radios other than the 850 has got me
> baffled, since I have not been able to have the software "see"
> my Kenwood 480.. no scan, nadda. Have tried a bunc
I have been following this thread about band blans since its inception,
with great intere
st, and I wonder why it is that the US hams seem to think that the world
starts and finishes in the USA.
There is an awfull lot of world outside of the "States". The US hams
seem to think that any country t
Just installed V 3.11
There are a lot of mode titles missing. The buttons work ok but fiding
the right one is a bit tricky
Anyone else havfe this problem
VK5OA
Yahoo! Groups Sponsor ~-->
Get fast access to your favorite Yahoo! Groups. Make Yahoo! yo
I have just downloaded latest Multipsk.
Has any frequency been discussed as a monitor frequency for the mode PAX.?
Kevin
VK5OA
Yahoo! Groups Sponsor ~-->
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo
44 matches
Mail list logo