I'm a 99% cw op, mine are 2.7 (soon 2.8) 2.1, 500, 400, 200. Sub is 2.7, 500.
The 400 I use always for contesting.
Doing CQ WW RTTY as a low power multi single, this weekend as first time ever
on this mode have WinTest es mmtty es setup for AFSK A.
What is the preferred filter width min es max
Ross the only way I can simulate that behavior on my P3 is by disconnecting
the P3 to K3 cable. Doing so causes the bootloader screen to come up
immediately when trying to do a ref lvl adjustment. You may have a loose
cable or pin not making connection?
Larry K1UO
Ross-33 wrote:
Jim,
Ken,
You wmay get a number of different answers on this, but mine would be:
max filter width 500 Hz while tuning around, and minimum width 250 Hz. A
normal operating setting might be 350-400 Hz. I believe your 200 Hz
roofing filter will be too narrow to be useful for RTTY.
More importantly, I
I am trying to understand what these terms mean, and having read the related
posts still can't figure out what they mean or what settings to use. I want
the P3 to reflect cw signals and sometimes ssb signals within a given span
(say plus and minus 75). I have no idea what the db signals to he
This is Tony's son Paul, sometime Monday night my father passed away in
his sleep. We used to joke about this being the best way to move on and
I'm glad that this was how he left this world. If anyone needs to
contact me for any reason I can be reached at pfe...@rogers.com.
Paul.
The scale on the left (in dBm) does indeed reflect receive signal strength, see:
http://en.wikipedia.org/wiki/S_meter
where the relationship between nominal S meter readings and receive
signal strength in dBm is explained.
Bob NW8L
On Wed, Sep 22, 2010 at 7:19 AM, KM4VX ronce...@earthlink.net
Something has recently gone sour in my station, and I'm not sure where the
problem
lies.
I have a SteppIR controller hooked to the K3 with the Wye cable SteppIR
provides.
Turning on the controller causes the K3 to toggle to xmit 6 times.
When the SteppIR controller is on, changing frequency
Just reloaded 4.05 and no help.
On 9/22/2010 10:20 AM, Mike wrote:
Something has recently gone sour in my station, and I'm not sure where the
problem
lies.
I have a SteppIR controller hooked to the K3 with the Wye cable SteppIR
provides.
Turning on the controller causes the K3 to
I agree with you, Karl.
I have been trying to figure out why someone would want a
700Hz filter myself.
When I want to tune CW casually, I use my 8 pole 1.8 SSB
filters in the main and sub and tighten the DSP to around
700-800Hz. Good dual use filter for me, very versatile!
Although I have
Toggling to transmit when programs initialize usually indicates that
CONFIG:PTT--KEY has the PTT portion set to DTR or RTS. The same thing can
happen with keying CW if the KEY portion is set to DTR or RTS.
If that is set, the K3 has been instructed to cycle to TX on if anything
asserts RTS or
Rich;
I copied your reply verbatim and pasted it into a text file. The file now
resides in my K3 folder along with the Operating Manual and other important
K3 info. I put it there because I know this information will be invaluable
some late night.
Thanks!
--
View this message in context:
Good point, Guy. Unfortunately, CONFIG:PTT-KEY is set to dtr-off.
The software isn't from SteppIR. It happens with any program which opens that
comm port.
Mike
On 9/22/2010 11:36 AM, Guy Olinger K2AV wrote:
Toggling to transmit when programs initialize usually indicates that
We're puzzling over this.
I read the SteppIR Y document to have only RxD and ground connected at the
K3 side of the Y. If that's the case, it's hard to understand how any
data transmitted from the SteppIR would influence the K3.
If the SteppIR controller were wiggling the RxD, it might affect
Whoops! Got my ends backward. Corrected note below:
We're puzzling over this.
I read the SteppIR Y document to have only RxD and ground connected at the
SteppIR side of the Y. If that's the case, it's hard to understand how
any data transmitted from the SteppIR would influence the K3.
If
Do you have PTT-Key set to dtr-off for a reason? What that means that any
assertion of DTR that comes in on the serial port IS SUPPOSED to place the
K3 in the transmit mode. Turn it off unless you specifically need it for
something specific. 73, Guy.
On Wed, Sep 22, 2010 at 12:00 PM, Mike
The Sounds of Silence!
I guess there was no good answer. I will conjecture though that if you use
the Line Out connection to the sound card in your computer, you could sample
the DVR playback with whatever audio recording utility you may have, save it
as a wav file (or whatever) and email that?
Guy, Dick, Mike, and Paul
Thanks for the attention and suggestions.
I checked the cable with an ohmeter, and it's correct, and plugged in correctly.
The problem is somewhere in my USB setup. I put it on a real serial port, and
it
works flawlessly. I had previously tried 3 different
I'm confused. Fairly normal state for me . . . :-)
I assumed off was. off.
My logging program asserts DTR for RTTY and PSK so I don't have to have VOX on
for
anything except CW.
73, Mike
On 9/22/2010 12:51 PM, Guy Olinger K2AV wrote:
Do you have PTT-Key set to dtr-off for a reason?
When using REV button on K3, P3 display frequency marker freezes and does not
track K3 frequency change - anyone else seeing the same problem? Firmware is
036 for P3.
Only soloution is to switch P3 off and back on.
73 Dave G0AIX
__
W8JI wrote:
Who the heck is copying that and what are they copying???
The highest speed record for a long time, of copying
unexpected text, was only around 70-80 WPM. That record held
the whole time I was growing up, and it was from the 30's I
think.
It is certainly impossible to
REV button? I can't find any REV button on either of my two
K3s.
73,
... Joe, W4TV
On 9/22/2010 2:38 PM, David wrote:
When using REV button on K3, P3 display frequency marker freezes and
does not track K3 frequency change - anyone else seeing the same
problem? Firmware is 036 for P3.
Look at the numeric keypad --- #2
On Sep 22, 2010, at 2:04 PM, Joe Subich, W4TV wrote:
REV button? I can't find any REV button on either of my two
K3s.
__
Elecraft mailing list
Home:
Yes, that seems to be the case. Once the REV button has been pressed, the
markers no longer track tuning, but remain at a fixed location. Same for both
Marker A and B
Grant/NQ5T
When using REV button on K3, P3 display frequency marker freezes and
does not track K3 frequency change -
David
I have the same problem here, well found!
Using latest firmware in both K3 and P3.
73 Stephen G4SJP
On 22/09/2010 19:38, David g0aixda...@aol.com wrote:
When using REV button on K3, P3 display frequency marker freezes and does not
track K3 frequency change - anyone else seeing the
http://www.rufzxp.net/
This kid copies 200WPM
--- On Wed, 9/22/10, Barry w...@comcast.net wrote:
From: Barry w...@comcast.net
Subject: Re: [Elecraft] K3: QRQ high-speed QSK
To: elecraft@mailman.qth.net
Date: Wednesday, September 22, 2010, 2:46 PM
W8JI wrote:
Who the heck is copying that
Please advise the list that I'm told of the passing of Tony Fegan,
VE3QF, in the past couple of days. Tony was active on the Elecraft
reflector, and a great Elecraft fan.
It was Tony who demonstrated his K3 to me for several hours, on
several occasions, before I ordered mine, two years ago.
CONFIG: PTT-KEY
dtr-off
This means that PTT is mapped to DTR, and KEY is disabled (off).
If you wanted to disable PTT and CW KEY, then you'd adjust
CONFIG: PTT-KEY
to
off-off
73,
Lyle KK7P
...
I assumed off was. off.
...
Good point, Guy. Unfortunately, CONFIG:PTT-KEY is
I should like some advice, please, as to where I am going insofar as my
calculation of the 1Hz noise power is at this rural I studied all of this
over 30 years ago, so I'm more than a bit rusty!
I have the XG-2 which I can only assume is working as it should, delivering
-73dBm. On the P3 this
For about a year I have been operating my K1 strictly battery power. I
have a barrel connector attached to a pair of red/black wires with red/black
alligator clips to connect to the battery. As my eyesight is getting poor I
do not want to take the remote chance I can apply reverse polarity.
Please get this correct! He did not copy at 200 wpm. He copied one call sign
at 200 wpm, but copying code and/or having a QSO at that speed is a
completely different situation. What he did was excellent but as I just
said, copying one call sign and having a QSO at those speeds is quite a
different
Alan,
If you check the K1 schematic, you will find there is already a reverse
polarity protection diode installed. It is D16.
That will not protect the wire, but it will protect the K1.
73,
Don W3FPR
On 9/22/2010 4:05 PM, ardujen...@aol.com wrote:
For about a year I have been operating my
Also, it appears that the tap-to-tune function does work properly after the REV
button is pressed either.
Grant/NQ5T
On Sep 22, 2010, at 2:12 PM, Grant Youngman wrote:
Yes, that seems to be the case. Once the REV button has been pressed, the
markers no longer track tuning, but remain at a
Look at button #2!!
OK ... never use it with the KRX2. However, it does not cause
the P3 to stop tracking the K3 or cause the markers to stop
responding to the encoder. What I see is that activating REV
causes the P3 Center Frequency to become decoupled from the K3
... and holding CENTER
The CW to Data is a VERY neat feature. Nice way to be able to work RTTY with
my currently minimal setup. However, the 4 second idle at the end of the
xmsn is WAY too long. I understand the ..-- option to end it, but a CONFIG
setting to adjust it would be great to have.
Tnx,
Barry W2UP
--
View
As a suggestion, it would be nice if the P3 would automatically reset itself
when the sub receiver is invoked (guess this would require the K3 to report
this out, so not sure how feasible this is!).
73, Tom W4KX
__
Elecraft mailing
Another suggestion: when the K3 goes into split mode, it would be nice for
the sub vfo indication on the P3 to go from magenta to red.
Also requires communication from the K3 to the P3...
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net]
I've notified Alan about this.
73,
Eric
On 9/22/2010 1:26 PM, Grant Youngman wrote:
Also, it appears that the tap-to-tune function does work properly after the
REV button is pressed either.
Grant/NQ5T
On Sep 22, 2010, at 2:12 PM, Grant Youngman wrote:
Yes, that seems to be the case.
Thanks, Lyle.
Another nugget of info to file in the old brain pan.
73, Mike NF4L
On 9/22/2010 2:51 PM, Lyle Johnson wrote:
CONFIG: PTT-KEY
dtr-off
This means that PTT is mapped to DTR, and KEY is disabled (off).
If you wanted to disable PTT and CW KEY, then you'd adjust
CONFIG:
Tony was a regular on the Sunday Elecraft SSB net, where he always had a
good signal, a cheerful demeanor and a heplful approach (relaying weak
stations, etc.). He will surely be missed.
73,
Phil, NS7P
-Original Message-
From: elecraft-boun...@mailman.qth.net
Any suggestions on an easy to use RTTY program for the K3? Very casual use
expected. I would like to spend my time on the air rather than reading a
huge pdf manual!
73,
Joe
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-RTTY-program-tp5561083p5561083.html
Sent from
On 9/22/2010 3:33 PM, W8JH wrote:
Any suggestions on an easy to use RTTY program for the K3? Very casual use
expected. I would like to spend my time on the air rather than reading a
huge pdf manual!
Either MMTTY [RTTY only but very good and it interfaces with several
popular logging
Joe,
You can make your choice of several software applications - MMTTY,
fldigi, HRD/DM780, and several others - AFSK or FSK will be part of your
decision.
Download each of the applications and take a look at the user interface
and choose the one you like better.
After that, yes, you will
Download the latest version of MMTTY. It is not hard to setup or use. And
after
you get use to it you can move on to more advance programs that use the MMTTY
engine in the background.
Biggest thing to remember if using AFSK-A or FSK-D on the K3 is to make sure
the K3
tones match the tones
Thanks, Dave. I confirmed the bug. You must be the first person with a
P3 to press the REV button!
Wayne and I are working on it.
Alan N1AL
On Wed, 2010-09-22 at 19:38 +0100, David wrote:
When using REV button on K3, P3 display frequency marker freezes and does
not track K3 frequency
#2 button top right next A/B
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-Display-Problem-tp5560268p5561322.html
Sent from the [K3] mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
Alan and Wayne,
I see you're busy fixing a bug at the moment, but ...
I wonder how high on the priority list is the ability to use the function
buttons on the P3 to send macros to the K3?
Right now I have MEM 0-9 set to BAND SEL. I used VM to set it up so that I
press MV and then
1 for 10
http://i.cmpnet.com/rfdesignline/2010/09/807_ENOBS_pt1.pdf
Part 2 still to come.
--
73 -- Brian -- K1LI
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
47 matches
Mail list logo