Just recently my P3 is showing a carrier with-in the SSB pass band. It is quite
strong and it is always there, even with no antenna connected. It is
particularly annoying on CW, where it falls exactly on the expected receive
frequency. It moves with the VFO, so it is always in the same place in
I have been running both my K3 and KX3 on 630m and 2200m for the last 18 months
using commercially available Transverters. The transverters require 5 watts of
drive and it is easy to adjust to this output on both of the Elecraft rigs.
Just search for 630m band transverter, or 2200m band transver
I have received an email which purports to come from Elecraft. The return
address goes to N9SC. It directs one to a suspicious looking web site. I have
not followed this link.
Roger Crofts, VK4YB
__
Elecraft mailing list
Home: http
I love my KX3 and its little paddle. Unfortunately my keying is full of
mistakes. When I send the letter C for example, it often comes out as CT or K.
I thought the KX3 must be set to mode B keying, but no, it was on mode A. I
originally learnt to send on an ETM-3b squeeze keyer many moons ago.
My K3 clock loses about 9 seconds per day. This is not quite as bad as Arlen's
clock, but it is still annoying. I run quite a few skeds and nets and I like to
be spot on time.
Dear Wayne, are you listening? We need your help to write a little routine that
goes like this:-
When the K3 powers up,
My last two orders from Elecraft came by U.S. Postal Service Priority Mail
International.
When I checked the tracking numbers, I discovered the first parcel had been
delivered to Brazil and the second one to the Russian Federation. As I live in
Australia, this was a bit of a worry. It turns out
Following the recent discissions of optimum CW pitch, I wondered if the brain
might be better able to discriminate the wanted signal from close-in QRM by
inverting the sideband to one ear. Only the wanted signal would have the same
pitch in both ears.
I set-up the main and sub receivers to a sep
In Australia we have a new band. The 630 meter band. It covers 472 to 478 KHz.
They tell me there is a lot of interesting activity going on there.
I tried to tune there with my K3 but alas it would only go down to 490 KHz.
With RIT at -10 KHz and set to LSB, I could just start to hear signals at th
I have had 2 problems with my P3 Panadapter, both were the subject of comment
on the Reflector.
The first was spurii radiated from the P3 DC cord and picked by my nearby
antenna on 144 MHz.
This problem was largely solved by fitting a commercial RFI filter in the DC
cord and ensuring that all p
I am really happy I added the P3 to my K3. It is my window on the band. I can't
imagine operating without it. I have had the P3 for six months now, but just
recently it has started to display two big ugly humps of noise that drift
across the display. This happens on all bands, but it might not a
I had a look at Jack's video showing the power fluctuations. They are quite
rapid and continuous.
If they stay like that, it will be a big help in tracking down the problem. The
tx signal can be traced
through the various stages with an oscilloscope to find where the steady signal
begins the flu
Jack, G8DX, wrote that his K3 has erratic output.
I had the same fault on my kit-built K3 (ser # 6906)
In fact my problem was worse, because at times I had no output and,
occasionally, the K3 (set to 20w) would drive my Metron Linear Amp with 110w
causing the breaker to trip.
I followed the inst
I recently added the KPA500 to my K3 and P3.
I put the KPA500 on the right of the P3 with the K3 on the left, just as is
shown in all the K line adverts.
This is the way it is intended. The rubber feet of the K3 and KPA500 touch the
P3 and their carrying handles are on the outside. Also you will
d with the K3.
Roger Crofts, VK4YB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
P
totally inside the P3 case. I will try that next.
Roger Crofts, VK4YB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted
wards my 2 meter antenna in this particular arrangement. This is a solution,
but not a very good one! I will continue my experiments and let you know how
they go.
Roger Crofts, VK4YB
__
Elecraft mailing list
Home: http://mailman.qth.n
shack. I was not able to find any mention of
this problem in the archives. Is there something wrong wi
th my particular P3 or do they all do this?
Roger Crofts, VK4YB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
17 matches
Mail list logo