For Sale: Elecraft P3 with no add-ons, serial #2615. Excellent condition w/
screen & screen cover excellent as well. I am the 2nd owner, but now excess
to my needs after K4D purchase.
Included:
- CBLP3Y KIO3B RJ45 cable for the connection to the upgraded K3 & K3s
models (those with a
I've decided to sell my spare P3. Has the latest USB I/O as well as the SVGA
module option. Comes with its full cable set. Condition is as new and it
probably has less than a half-dozen hours on it. So if you are looking for a
sleeper, this P3 is a good pick.
Price is $900 plus shipping
Please look at the K3s Owners Manual. The cabling necessary
to connect the K3S (and K3 with KIO3B) RJ45 Serial connection
to the 2 x DB9 connectors of the P3 or to connect the
K3 (DB9) serial connection to the P3 ... is fully documented
there.
73,
... Joe, W4TV
On 3/7/2024 6:41 PM,
Okay, I found an image of the apron of an early P3 & it is using a DB9 RS232
sub d connector.
Does anyone know this can be adapted to the later CAT5/6 socket the newer K3s
uses?
Doug W5JV
From: Doug Hensley
Sent: Thursday, March 7, 2024 5:24 PM
To:
I recently heard that early P3's (first gen ?) used a different P3-to-K3 cable
than the last generation of P3-to-K3s's did. Can anyone tell me anything about
that? And is there a fix for connecting an eary P3 to a late K3s?
Or was my leg being pulled?
Thanks,
Doug W5JV
Visit
That's the connector where the K-POD connects in addition to whatever
Elecraft techs use it for
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
Robert Brown via Elecraft wrote on 3/6/2024 6:34 PM:
Excellent condition P3 w/SVA option. Only “defect” is that a underbody
connector
Excellent condition P3 w/SVA option. Only “defect” is that a underbody
connector (presumably only used by Elecraft techs) is detached. Will provide
original part if replacement is desired, but seems to serve no useful purpose.
Unit is otherwise in pristine operational and cosmetic condition.
P3 has been SOLD.
Tony W3FLH
From: Tony Cuttone
Sent: Tuesday, December 19, 2023 3:52 PM
To: elecraft@mailman.qth.net
Subject: FS: P3 w/TXMON
Hello everyone,
I have for sale a P3 Panadapter w/TXMON option (s/n #385), no SVGA. In
excellent condition, includes
On 12/17/2023 1:12 PM, Brian Hunt wrote:
I’ve discovered that it’s easier to see a very weak signal on the
waterfall than in the amplitude plot. Setting the SVGA screen for 25%
spectrum and 75% waterfall gives lots of space to see dim traces. You
may have to adjust the threshold a bit.
YES!
Hi Jim,
I’ve discovered that it’s easier to see a very weak signal on the waterfall
than in the amplitude plot. Setting the SVGA screen for 25% spectrum and 75%
waterfall gives lots of space to see dim traces. You may have to adjust the
threshold a bit.
73,
Brian, K0DTJ
> On Dec 17, 2023, at
On 12/17/2023 12:05 PM, Jim Murray via Elecraft wrote:
My thought is at this point the P3 is not doing me much good looking
for a weak dx signal. I have to think I have something not set up right
etc..
What is required is careful (and ongoing) adjustment of P3 controls. For
everyday
Can't speak to the K3s, but the K3 required a modification to the 1st IF
[8 MHz] gain for my P3 to show weaker signals. It was just a resistor
change.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
Jim Murray via Elecraft wrote on 12/17/2023 12:05 PM:
Hello all, Having acquired a
Hello all, Having acquired a fully loaded K3s fairly recently I am behind the
curve of those fortunate enough to have a K4. Its taken several weeks to get a
decent handle on the K3s and now on to the P3. I have all the manuals
including Fred Cadys K3s and P3. I find the K3s to be excellent
Forwarding for a friend, his contact info is in the email below. I
deleted the photos he had attached.
Forwarded Message
Subject:Elecraft P3 Panadapter w/ SVGA add-on
Date: Thu, 7 Dec 2023 17:50:22 -0800
From: Nelson Farrier
To: Dave Cole
In 9 out of 10
PLEASE FIND P# FOR SALE.
https://k3bfp.com/elecraftp3amateur-radio-gear-for-sale/
--
Michael Kelly
K3BFP
610-637-9055
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
My P3 screen has lost it's brightness.
Any suggestions?
Bob, W1EQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
I have for sale my back up P3/SVGA in the original box, and it comes with
the original manual and cables. $850. SN 4806 if interested contact me off
the reflector. I am good on QRZ. US sales only .
Thanks
Bruce WW8II
__
Elecraft
Very nice P3/VGA Panadapter for sale by original owner from no pet and no smoke
home. Sale includes the following:
1. Elecraft K3 to P3 cable
2. Elecraft K3 to P3 IF cable
3. Elecraft K3 to P3 Power cable
4. Owners Manual
5. Fred Cady - KE7X P3 Manal
Additional pictures available. Price is $720
I have a pristine and working 100% P3 that I can take to Dayton/Xenia. No VGA
or K3 cables (I used it with a non-Elecraft rig.) I did put 1/2 down on a VGA
upgrade for it back when they announced the last chance K3series build years
ago. I’ll sell the P3 and transfer the 1/2 upgrade to you
Please reference the P3 manual pp19.
Markers donot follow the VFO. They are used to set VFOA (MARKER A) or VFOB
(MARKER B) with QSY TAP,
depending which marker is displayed on the P3 screen.
73 de Ben W4SC
Sent from Mail for Windows
I'm new to my recently set up, 10 year old, P3. Not one of the hotshots
here, grin.
I see a green center line on my P3 at the moment with an additional green A
line and a magenta B line. When I turn the big knob on the K3, both A and
B lines move away from the green center line as the new
I must have something set incorrectly.When I turn the VFO A knob MRK B moves as
I turn the main knob.
Bob, W1EQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
It's the MENU:CenterEn function. When OFF, the center key does not
adjust the center frequency when in tracking mode.
Alan N1AL
On 4/25/23 08:06, ROBERT GARCEAU wrote:
When i press the Center button on my P3, I get a "center key disabled" message.
I have been trying to find the problem. No
When i press the Center button on my P3, I get a "center key disabled" message.
I have been trying to find the problem. No success.
Bob, W1EQ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
I have a very nice, basic P3 for sale. Includes cables, copy of namual and a
wool/felt cover. $499, shipped and insured. Pleas respond off list to
n...@comcast.net mailto:n...@comcast.net . Tnx es 73, Dave N8AG
__
Elecraft mailing list
ohm dummy
load or place it in the RF path which is 50 ohms nonreactive.
73
Bob, K4TAX
Message: 2
Date: Fri, 7 Apr 2023 16:15:31 -0600
From: Alan Bloom
To: Elecraft Reflector
Subject: Re: [Elecraft] [P3] P3 woes - repaired but now claims my K3s
puts out 873W!
Message-ID: <3fbef504-3
It's always seemed to me that Poynting's Vector is the most aptly named
entity in mathematics.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
Edward Mccann wrote on 4/7/2023 7:41 PM:
Dave:
You may have redefined Poynting’s Theorem!
Ed McCann
On Apr 7, 2023, at 6:23 PM, Dave New,
Wait, shouldn’t the sensor be before the antenna tuner? I don’t think a sensor
should be connected where it’s not 50 ohms.
Al W6LX/4
> On Apr 7, 2023, at 9:22 PM, Dave New, N8SBE wrote:
>
> Alan,
>
> I tried changing the SensorCal entry, but you are correct there isn't enough
> range.
Dave:
You may have redefined Poynting’s Theorem!
Ed McCann
> On Apr 7, 2023, at 6:23 PM, Dave New, N8SBE wrote:
>
> Don,
>
> The KPA500 (and K3s) both show the correct wattage - 100W barefoot and about
> 26W out of the K3s when the KPA500 is inline, and about 500W out of the
> KPA500.
>
Don,
The KPA500 (and K3s) both show the correct wattage - 100W barefoot and
about 26W out of the K3s when the KPA500 is inline, and about 500W out
of the KPA500.
I tried changing the P3 SensorCal value from 500 (default) to 350 (min)
but that only dropped the wattage shown by a little less
Alan,
I tried changing the SensorCal entry, but you are correct there isn't
enough range. It only cut the reading by less than half.
When I change the MtrScale entry, it changes the meter scale, but it
still shows over 800W (and runs over the smaller scales) in text on the
screen.
I did
Dave,
Yes, it is at 500 which is the default, and I've used it at the setting
for the past 13 years.
I tried changing it to 350 which is the minimum, and it now shows about
440W, so that seems about right for 350/500 * 873W.
But it seems there isn't enough range to pull it in to 100W, so I
Hi Dave,
There is a "SensorCal" entry in the Transmit Monitor Menu, but I don't
think it has enough range to correct such a large error.
There is also a "MtrScale" entry to set the full-scale power on the
meter display. Does the reading change when you change the scale?
In addition to the
Dave,
What power is displayed on the KPA500? The KPA500 would fault if indeed
the K3s is putting out that much power. The KPA500 power bar is pretty
accurate, just a bit coarse in its increments.
I think a power calibration is in order for the P3 power indicator.
73,
Don W3FPR
On
Have you looked at the calibration setting in it yet? Not sure if it
can pull it that far, but that may be what is off.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 4/7/23
So, I was the guy that had a P3 display/boot problem recently.
I sent it to the mother ship for repair, and they found that (get this)
the 12V supply was shorted to the 3.3V supply (eep!).
So, a new(er) I/O board (which contains the supplies) and a replacement
blown 3.3V LCD controller later,
Alan,
Looks like I'll have to pack it up and send it in.
Thanks, Alan, for all your help and suggestions.
73,
-- Dave, N8SBE
On 2023-02-27 21:14, Alan Bloom wrote:
Hi Dave,
The internal display comes on briefly, then the P3 powers down. ...
And no, I can't contact it via the utility
Alan,
Moving the jumper to 1-2 doesn't change the behavior. The internal
display comes on briefly,
then the P3 powers down. I've tried it in all 3 positions, and the
behavior is the same
whenever the P3 attempts to power on.
And no, I can't contact it via the utility anymore. The most
I believe the display board was replaced... If I remember right, the
test was to look at the inside of the P3, and see if the display board
LED was flashing. If flashing, it was OK, if not, something died...
This has bee a few years ago, so my memory of this is no longer that
clear...
73,
By the way, I no longer have a K3 or P3 (lost in a house fire) so this
is from memory...
> Since the internal display seems to show OK, no matter how briefly,
> I'm thinking this is not an internal display connection issue.
Agreed.
> This seems to be a power on reset issue of some sort.
Can
Alan,
Before I got the chance to look into your idea of possibly bad display
connection,
I DID reload a saved configuration into the P3 using the P3 Utility, and
it restored
the high-res setting on the external display.
After power cycling (the generator quit unexpectedly due to a low oil
Dave,
Any idea of what repair action they did?
73,
-- Dave, N8SBE
On 2023-02-24 14:31, Dave (NK7Z) wrote:
Hi,
I had the exact same issue, with the exact same symptoms, sent it into
Elecraft, got it back, and it worked until I sold it.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL
Hi,
I had the exact same issue, with the exact same symptoms, sent it into
Elecraft, got it back, and it worked until I sold it.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On
Thanks Alan,
I'll take a look-see this weekend and see if it's something I can
tackle.
I've recently dealt with tiny flex connectors like that on another
project,
and it survived. :-)
I'll be sure to come back here and report my findings.
73,
-- Dave, N8SBE
On 2023-02-24 13:23, Alan
Hi Dave,
Another possibility is that perhaps one of the display connectors has
come loose or is making a bad connection.
I normally wouldn't recommend this since these tiny connectors are kind
of tricky, but since the P3 isn't working anyway, there's nothing to lose.
There are two
Mike,
Thanks for the idea! I hadn't considered that mitigation.
Anyone else have ideas for a permanent corrective action?
73,
-- Dave, N8SBE
On 2023-02-24 09:13, Mike Flowers wrote:
Hi Dave,
If you have a way of sending P3 control commands to the P3, there may
be a
chance that you could
Well my 10+ yr old P3 seems to have finally bit the dust.
I had been having issues with getting the internal display to turn on
when powering the P3 up.
I had found that by letting it run for a minute or so (the external
display always worked), that I could then quickly cycle the power
Joe,
The complete syntax for those commands can be found in the Programmer's
Reference.
73,
Don W3FPR
On 2/13/2023 3:04 PM, Joe K2UF wrote:
Not sure if this the correct address for this question. I am trying to send
cammands to the P3 and K3 from a VB,NET program. I tried several
Not sure if this the correct address for this question. I am trying to send
cammands to the P3 and K3 from a VB,NET program. I tried several different
attempts to send commands to the P3 and K3. I need the exact systax for the
code to send these commands. If this is not the correct place for
Does anyone know if the P3 Panadapter will work with the K2 transceiver?
It does, with a number of caveats:
- The K2 does not have an IF Out port. On my K2, I never installed the
no-antennatuner BNC connector; I modified the connector to use a small
coax cable (AWAY from the high RF output
Bill,
If you add the Clifton Labs Z2 buffer amplifier (now sold by DX
Engineering) to provide an IF output from the K2, it will work as a
spectrum display. It will not report the K2 VFO frequency as it does
with the K3.
73,
Don W3FPR
On 1/24/2023 3:03 PM, William Santos via Elecraft
The K2 doesn’t have an IF out, unless it has been modified. Without the IF out,
it won’t
Sent from my iPhone
> On Jan 24, 2023, at 3:05 PM, William Santos via Elecraft
> wrote:
>
> Does anyone know if the P3 Panadapter will work with the K2 transceiver?
>
> Thanks and 73,
>
> Bill
>
Does anyone know if the P3 Panadapter will work with the K2 transceiver?
Thanks and 73,
Bill
KN6UDK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I posted yesterday an Elecraft P3 for sale. Once again I got the price
wrong.
The P3 is in excellent condition. Comes with the Gems side panels.
Inside there is the modulation monitor and SVGA boards. All cables
included, along with the instruction manual.
This is priced at $850.00 plus
I posted yesterday an Elecraft P3 for sale. Once again I got the price
wrong.
The P3 is in excellent condition. Comes with the Gems side panels.
Inside there is the modulation monitor and SVGA boards. All cables
included, along with the instruction manual.
--
73,
Carl
AB1DD
Resistance
As much as I would like to get 11000 for the P3, It should be 1100.00.
To many "0s"
--
73,
Carl
AB1DD
Resistance is futile.
(don't know about reactance, though)
__
Elecraft mailing list
Home:
New Years resolution to clean out the shack.
Elecraft P3 panadapter, works great. Includes P3TXMON installed and one
DCHF-2000 directional coupler covering 1.8-54 MHz, 2KW power handling.
Asking $750 plus actual shipping, reasonable offers considered.
73 de Chuck, WS1L
chandler...@gmail.com
On 8/31/2022 3:24 AM, Josep via Elecraft wrote:
How do you guys solve this.?
Study the manuals. The KUSB converts USB to RS232. For RS232, It's PC to
P3, P3 to K3. For keying and control, go into K3 menus and configure
keying options from the serial port. In the logging program, configure
Hi guys,
just a quick question regarding connections for a K3 and a P3.How do you
connect a P3 into the K3 and run KUSB into the PC when you work a contest.?If I
connect the P3 into the radio, then I have no chance to connect the KUSB to key
the radio..!!How do you guys solve this.?
Thank you,
Hi,
I had this exact problem, the problem gets worse with time... At least
mine did. I sent in my P3 to Elecraft repair, and got it back a month
or so later working...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst.
Allen,
I have this issue with my P3, and it seems to be related to internal
(to the P3) power rail problems.
I have the SVGA adapter, and the external display always works, even
if the P3 display isn't.
After leaving the power on for a minute or less, I can quickly toggle
the power
] Elecraft P3 BLACK SCREEN but not DEAD
I had the same problem with mine a while ago. The problem was with the
3.3-volr regulator module. It would get very hot and stop working after a
few minutes. There are two regulator modules on the input board. A 5-volt
and a 3.3-volt. They are the thick
Subject: [BVARC] Elecraft P3 BLACK SCREEN but not DEAD
My P3 screen has gone black. When I plug in the power, I still hear some
very quiet relay click. Any quick ideas?
Full disclosure: I suffered a voltage spike some time ago which took out my
K3 some time ago (it is at Elecraft now); P3 still
My P3 screen has gone black. When I plug in the power, I still hear some
very quiet relay click. Any quick ideas?
Full disclosure: I suffered a voltage spike some time ago which took out my
K3 some time ago (it is at Elecraft now); P3 still operated but the POWER
switch no longer worked, i.e.
My K4D is about to ship. I am not sure about selling my K3S yet, but
this is no longer needed.
Serial number 2043.
VGA option and 205-523 RF cable.
Picture attached.
$995 plus shipping.
Don
N1DG
Duxbury MA 02332
Duxbury, MA 02332
Does it include the VGA options?
Paul
M0SNA/W6PNG
> On Jun 20, 2022, at 9:52 AM, John Chappell G3XRJ wrote:
>
> Fully working in excellent condition complete with cables for linking to K3.
> The P3 allows accurate signal level analysis and transforms the K3 experience.
>
> £495 delivered
>
Fully working in excellent condition complete with cables for linking to K3.
The P3 allows accurate signal level analysis and transforms the K3
experience.
£495 delivered
John G3XRJ
07789 652868
__
Elecraft mailing list
Home:
and I have an Ebay special GPSDO, which is ridiculously accurate.
But I
don't know how pure it is.
- Jerry KF6VB
On 2022-06-07 17:14, Wes wrote:
Sure, but how do you quantify the "relatively pure" source if you
build one? Typically you want it to be 10 dB better than
Sure, but how do you quantify the "relatively pure" source if you build one?
Typically you want it to be 10 dB better than what you are measuring (or the
measuring instrument).
The other option is a commercial source with published specs. For example I
have an ebay special Morion MV89 10
That is one of the reasons I am not going the nanoVNA route... I
suspect the P3 is a far better measurement tool.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 6/7/22 15:07, Jim
On 6/7/2022 1:56 PM, Wes wrote:
But...what you measure are the results of phase fluctuations in the DUT
*plus* the phase fluctuations in the measurement system's oscillators
and/or sampling clock jitter. This is the K3/P3.
Yes
73, Jim K9YC
Jim,
Thanks for your answer! Also, thanks for your past work!!
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 6/7/22 12:13, Jim Brown wrote:
On 6/7/2022 8:04 AM, Dave (NK7Z)
On 2022-06-07 13:56, Wes wrote:
*plus* the phase
fluctuations in the measurement system's oscillators and/or sampling
clock jitter. This is the K3/P3.
*** I wonder if the noise of the K3/P3 could be measured using a
relatively pure
signal source - then once that's known, you would subtract
I can't answer the first two and Al has given the answer to the third.
But, you're not going to be measuring phase noise in the strictest sense, but
what ARRL calls composite-noise. Interesting they *do* actually measure phase
noise with an HP11848 Phase noise test set and then they assume
On 6/7/2022 8:04 AM, Dave (NK7Z) wrote:
Thanks in advance for any help in this...
I use a P3/SVGA to measure signal bandwidth (and before I had the SVGA
board, used the P3). It's dynamic range is 100 dB, but the screen can
display only 80 dB. A rig with decent phase noise performance is well
Al,
THANK YOU Also, thanks for the formula! :)
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 6/7/22 08:18, Al Lorona wrote:
According to Al, N1AL, "The effective bandwidth
According to Al, N1AL, "The effective bandwidth of the P3 is approximately one
pixel on the display, which is SPAN/468. So, for example, if the span is 47
kHz, the effective bandwidth is about 100 Hz."
To "convert" or "correct" to a 1 Hz bandwidth, use the formula:
BW_correction_factor = 10 *
Hi,
I am contemplating practicing some phase noise measurements using a P3.
If I correctly understand the measurement, (which I may not), I should
express the result, using db down from peak, so many Hz away from peak,
using a 1 Hz width.
First question; is the above correct?
Second
I have a P3 with SVGA monitor board and TXMON board with the 2KW HF sensor
for sale. $1200. I will bring to Hamvention. Contact me at k...@arrl.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
Many thanks to Mike Flowers, and PE1HCG, both sent me a note, to check
the cables inside the P3 as they sometimes come loose in shipping. That
was indeed the issue!
The coax between the signal conditioner at the BNC connector, and the
main PCB had come loose in shipping. It is not very
Morning,
I had a P3 failure back in December, and sent in P3, (serial number
3155), to Elecraft for repair.
While 3155 was in for repair, I purchased locally a second P3 to use in
P3, 3155's place, and have been using it with no issues.
P3, 3155 arrived back to my home about a month ago,
I had the same issues. The interconnects supplied with the P3s I had were
poor. I finally cut every one in half and filed in the circular file. Made my
own with some DS-RG316 and quality 50 Ohm BNC new old stock. No more
interconnect issues….
de Ben W4SC
Sent from Mail for Windows
BNC cables do have issues all of their own. First a manual connector seems
difficult for some to terminate properly (especially the shield).
Connectors have 2 sizes of center pins (50 & 75 ohm). Using a large
connector and then a smaller conductor will cause an intermittent at the
female center.
I had a similar problem when I first got my P3. The symptom(s) centered
around the noise drifting upward. Hand on top would send it back down
to the baseline. One of the Elecraft techs [who I know well] sent me a
new jumper on the condition that I cut the old one into 5 cm pieces so
it
Trevor,
Try another coax jumper between the K3 and P3. I have heard of this
problem being caused by poor connection of the shield braid (or
low-quality braid) in the jumper.
73,
Victor, 4X6GP
Rehovot, Israel
CWops #5
Formerly K2VCO
https://www.qsl.net/k2vco/
On 31/01/2022 10:09, MØTDZ
I am sure I have seen some threads on this before so please accept apologies If
i am going over something twice.
Having moved to an area with a much lower noise level I note loads of sprogs /
spurious signals following me around on the P3 panadapter. Is there a common
cause of these (im
Ed:
> On Jan 8, 2022, at 10:21 AM, Ed G wrote:
>
> Hello,
> I am investigating ways to be able to see P3 video when linking to a
> local computer via a remote desktop type of program. The local computer
> would be controlling a K3 using Win4K3 and I would like to also be able to
> see
I have been using a StarTech.com USB3HDCAP USB 3.0 Video Capture Device
with the WIN4K3 panadapter display since 2016. Works great except when a
Windows update messes with it and I have to reinit the proper driver.
zeke (AL) ab8ou
On Sat, Jan 8, 2022 at 11:22 AM Ed G wrote:
> Hello,
>
Hello,
I am investigating ways to be able to see P3 video when linking to a local
computer via a remote desktop type of program. The local computer would be
controlling a K3 using Win4K3 and I would like to also be able to see the P3
video. So I am considering a VGA capture card to allow
I have a extra clean p3 for sale.
I comes with the cables and the manual.
Pictures on request.
jomatl...@gmail.com
$800.00 shipped with insurance.
Pay pal is preferred.
Thanks
Johnny ACØBQ
--
Check out the 4SQRP website at 4sqrp.com
__
I have elected to part with my one owner P3.
P3-F s/n 779
P3TXMON-F
P3SVGA-F
All purchased new by me. I can supply pictures however as my K3 is ONCE AGAIN
in for repair at Elecraft I can’t show it in operation
Price is $1000 shipped in CONUS
With original boxes and manuals
Out of country will
Good afternoon,
My P3 was just returned from Elecraft, where I sent it for repair
(lightning). The SVGA card was in the box with paperwork saying the U502
voltage regulator was replaced, but the unit was unrepairable.
Is there anyone on the list who would be willing to try and repair it? I
The Problem recovers.
I wou;ld Clean All Cables, Sockets and Plugs
Power Supply Connections FIRST.
Ray WA6VAB K3
From: Michael Carter
Sent: Monday, November 29, 2021 9:08 PM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 Issue
Ken,
I have not experienced the difficulty
with my P3
Ken,
I have not experienced the difficulty
with my P3 that you encountered,
but the fact that both the P3 front
panel display and the external SVGA
display shut down indicates a problem
with data not being provided to either
display driver system OR there is a
thermal problem with one of the
About 8 hours into CQWW CW, one of my P3's bandscope function stopped
working. I checked the cables. I powered the unit off. When it came on, it
worked for a few seconds. The outboard monitor worked for a few seconds.
Then it stopped working. I did this a few times with the exact same
results. I
Please make me a reasonable offer to include shipping and PayPal fees. I
looking for $900. Includes all cables, left in place to plug into K3. Will
send photos on request. No scratches. No smoke. Like new.
73,
Bill
K9YEQ
__
Dave,
Also the K3 memory editor can read the memories and send them to a K3.
https://elecraft.com/pages/elecraft-frequency-memory-editor-software
Carl
AB1DD
On 11/24/2021 10:56 AM, Carl wrote:
Have you tried this:
https://dl2rum.de/RUMlogNG/docs/en/pages/CAT-KX3.html
Might work?
On
Carl,
I must be blind, am I missing a download link for this software? I
don't see one on that page...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 11/24/21 07:56, Carl wrote:
Thank you Carl, I will look at that software...
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 11/24/21 07:56, Carl wrote:
Have you tried this:
Have you tried this:
https://dl2rum.de/RUMlogNG/docs/en/pages/CAT-KX3.html
Might work?
On 11/24/2021 10:52 AM, Dave wrote:
Hi,
I have 50 macros programmed into one P3, and want to move them to a
different P3.
Does anyone know of a way to move the macros programmed into one P3,
to a
1 - 100 of 4853 matches
Mail list logo