Rayh wrote:
So the easy answer is we could work up some sort of survey but
most of
our users, once they get the kinks/configurations worked out for
their
machines are never heard from again.
One solution would be to have EMC bug the user after so many hours
of run time (or so many days
--- Ray Henry [EMAIL PROTECTED] wrote:
Hi guys.
These posts bring to mind two long running thoughts, one directly
related to EMC and one not quite so related.
There was a heated discussion at that long ago FEST meeting in
Ann Arbor
when we created the EMC board. It was related to
Hi Ben
On Wed, 2007-08-15 at 04:09 +, ben lipkowitz wrote:
I want to make sure people are aware that these _are_ two distinct ideas
and that one is not reliant on the other. I think it would be a bad idea
for the two to be directly associated as there will eventually be
conflicts of
Hi Fenn,
What is it that you imagined? Other than the fact that o-words are numeric
(on my list of work to do is allowing them to be alphanumeric), what else
would you like?
Ken
[EMAIL PROTECTED]
Mark Kenny Products Company, LLC
55 Main Street Voice: (888)ISO-SEVO (888)476-7386
Newtown,
I mean it's really hard to actually read it, once you've paid the $15k or
so to actually get the documents. (You can get an idea by looking at the
draft standards.) This is done so the people who wrote the standards get
to keep their jobs as the people who read and explain the standards to
Dear All,
I am considering adding encoders and home switches to my Sherline CNC mill.
I see 2 benefits:
1) Being *sure* of not loosing steps (estop, ...)
2) Using (low precision) home switches and the index of the encoder, I get
*excellent* repeatability when homing.
The mill is equipped with
Michel Gouget wrote:
Dear All,
I am considering adding encoders and home switches to my Sherline CNC mill.
I see 2 benefits:
1) Being *sure* of not loosing steps (estop, ...)
2) Using (low precision) home switches and the index of the encoder, I get
*excellent* repeatability when homing.
He is probably looking for something a bit more industry standard.
Like G65 simple macro call and G66 modal macro call with G67 cancel, with
more normal looking argument assignment.
Like this one using argument assignment type I.
G65 P1001 Z-0.750 R0.100 D#101 A#100 F#9
Then there is assignment
Kenneth Lerman schrieb:
What is it that you imagined? Other than the fact that o-words are numeric
(on my list of work to do is allowing them to be alphanumeric), what else
would you like?
I don't know what Fenn would like to see, but here is a use case for
such a language which I currently
Michel Gouget wrote:
Dear All,
I am considering adding encoders and home switches to my Sherline CNC mill.
I see 2 benefits:
1) Being *sure* of not loosing steps (estop, ...)
2) Using (low precision) home switches and the index of the encoder, I get
*excellent* repeatability when homing.
Hi EMC2 pros
I was using 12 years IBH CNC: http://www.ibh-cnc.com
They had so called Parameter sentences.
A parameter sentence was always one Line, and startet with a star,
for example:
*N10 P43=4000
With this lines you could perform simple math like *+-/, sqr, If,
goto etc, you had about
Ask user to define minimum and maximum X, Y and Z positions by moving
the tooltip to the relevant positions manually or by entering the values
numerically. Then use a procedural (possibly recursive) approach to scan
the work pieces surface with a touch probe.
Not the most advanced waz to do
In emc2, these are known as parameters. The # character is used to
set them or use their values.
A parameter can be set with gcode like
#43=4000
and used like this:
X10 Y10 F#43
Math is supported:
#43=[sin[45] * 300]
and can be used anywhere a number would be used:
X10 Y10
I'm
sure there is a way to solve that problem, but nothing springs to mind
right now.
how about a long limit switch (between 2 encoder indexes), just use a latch
to toggle the state.
to summarize: actual switch AND encoder index - toggle signal for the
latch.
latch output - emc home-sw
Cool!
(I should read the Manual ;-))
Thanks anyway for telling me this feature.
Hansjakob
Am 15.08.2007 um 16:04 schrieb Jeff Epler:
In emc2, these are known as parameters. The # character is
used to
set them or use their values.
A parameter can be set with gcode like
#43=4000
On Wed, Aug 15, 2007 at 03:16:35PM +0200, Sven Mueller wrote:
Ask user to define minimum and maximum X, Y and Z positions by moving
the tooltip to the relevant positions manually or by entering the values
numerically. Then use a procedural (possibly recursive) approach to scan
the work pieces
ben lipkowitz wrote:
We tried to make a map where the users could place a pin at
their location, I don't know what has happened to it.
what ever has happened to the map ( google map if I remember right )
that even had pic's of users equipment ?
the map is here:
http://www.frappr.com/emc2
On Tue, 2007-08-14 at 20:45 -0500, Javid Butler wrote:
I have been meaning to ask you about who fabricates your pcb's. I need
to have a few RS-422 transmitter and receiver boards made.
Kirk-
Can you elaborate on what you need?
...snip
Anyway, please tell us more about what you need and
Some of the recent discussion on wish lists and silent users etc. has
prompted me to chime in here. I have been a lurker on this list for a
long time, have played with EMC several times, and have dreamt of
building a CNC machine (mill, drill, filament winder, or foam cutter,
depending on which
- Original Message -
From: John Kasunich [EMAIL PROTECTED]
To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
Sent: Wednesday, August 15, 2007 8:59 AM
Subject: Re: [Emc-users] Encoders with steppers
snip
PID's response to feedback falling behind command is to drive
I have a confession to make. The only real CNC experience I have had was
a three month stint a couple of years ago, mostly with a Fadal. (I
really liked that machine, except for the tool changer randomly getting
chips under the tool holder.)
For the first run of a part, I recall reducing the
Ryan Hulsker wrote:
Some of the recent discussion on wish lists and silent users etc. has
prompted me to chime in here. I have been a lurker on this list for a
long time, have played with EMC several times, and have dreamt of
building a CNC machine (mill, drill, filament winder, or foam
How hard is the 8191 count per index limit on the Pluto controller? In
other words, what are the chances of the count per index being
increased?
Kirk Wallace
-
This SF.net email is sponsored by: Splunk Inc.
Still grepping
'I think' that jepler has already increased that - I have 2540 line
encoders/w index which are 10160 count that I have not tested yet but I
think will work now.. I actually think he went about the encoder counting
different so it isn't an issue.
I am sure jepler will chime in here. :)
sam
On Wed, Aug 15, 2007 at 01:08:26PM -0400, John Kasunich wrote:
G33 threading passes are one way to sync tool motion with the spindle,
but maybe not what you want, since each G33 pass waits for an index
pulse - in a winding application you will still be winding fiber during
that wait.
Not
The rating for the SoftDMC configuration is ~3 MHz if the filter is
enabled, and faster if the filter is disabled.
SoftDMC is not the config used with EMC2, but I think the encoder
counter is the same, so I'd think it could count at 3 MHz or better,
depending on noise filtering.
- Steve
Kirk
Typically, how long can the cable be between the UniversalPWM controller
and servo amps? The amps have differential PWM and direction inputs. I
assume they are RS-422 compatible? (Just keep below 10 mA through 1
kOhms?)
-
Alex Joni schrieb:
Ask user to define minimum and maximum X, Y and Z positions by moving
the tooltip to the relevant positions manually or by entering the values
numerically. Then use a procedural (possibly recursive) approach to scan
the work pieces surface with a touch probe.
Not the most
The change in emc2.2 will be to allow any number of counts per index, so
long as the maximum number of counts per servo cycle is within the
permitted range. I made this change for sam and his 10160-count
encoder, but I am not sure he's actually tested it with the updated
version.
Jeff
Quoting Kirk Wallace [EMAIL PROTECTED]:
For the first run of a part, I recall reducing the feed rate and then
single stepping through the program. I think there was a single step
button you could activate before you hit the cycle start, so that the
program would single step right from the
This could also be because Adobe havent released a 64bit version and the
32bit dosn't play nicely with any 64bit browsers. It has killed some
things for me, but thats there loss
Jason
On Wed, 2007-08-15 at 21:56 -0400, Gene Heskett wrote:
On Wednesday 15 August 2007, Jon Elson wrote:
ben
I take it that EMCMOT_MAX_DIO is compiled into EMC (emcmotcfg.h). So if
I need more than four m64pX's I would need to compile my own EMC? I
suppose being able to compile my own EMC would be a good thing, but I'm
trying to put it off for later. Thank you.
Kirk Wallace
On Wed, Aug 15, 2007 at 07:57:26PM -0700, Kirk Wallace wrote:
I take it that EMCMOT_MAX_DIO is compiled into EMC (emcmotcfg.h). So if
I need more than four m64pX's I would need to compile my own EMC? I
suppose being able to compile my own EMC would be a good thing, but I'm
trying to put it off
hi all,
just wondering if anyone has used a Q2HB44MA stepper drive
( http://www.bsjd.com/_en/products_show.asp?Productid=424 ) as I have
just acquired some for my new mill.
which is best a step/dir signal or CW/CCW signaling for steppers?
Jason Cox
On Thu, 2007-08-16 at 00:09 -0400, Gene Heskett wrote:
On Wednesday 15 August 2007, Jason Cox wrote:
hi all,
just wondering if anyone has used a Q2HB44MA stepper drive
( http://www.bsjd.com/_en/products_show.asp?Productid=424 ) as I have
just acquired some for my new mill.
which is best
On Thursday 16 August 2007, Jason Cox wrote:
On Thu, 2007-08-16 at 00:09 -0400, Gene Heskett wrote:
On Wednesday 15 August 2007, Jason Cox wrote:
hi all,
just wondering if anyone has used a Q2HB44MA stepper drive
( http://www.bsjd.com/_en/products_show.asp?Productid=424 ) as I have
just
Gene Heskett wrote:
On Wednesday 15 August 2007, Jon Elson wrote:
ben lipkowitz wrote:
We tried to make a map where the users could place a pin at
their location, I don't know what has happened to it.
what ever has happened to the map ( google map if I remember right )
that even had pic's of
37 matches
Mail list logo