Hi,
The first interface 192.168.0.1 255.255.255.0
The second interface: 10.228.44.1 255.255.255.0
The gateway for the first interface must be 192.168.0.254 and the
second
interface must be 10.228.44.254
How can I configure them? In rc.conf we have just defaultrouter but
we can't
Edward,
I want to know what's meaning of 'S','.','P','F'?
You should learn a bit about TCP protocol.
S is for SYN (synchronize)
P is for PUSH
F is for FIN
. is for nothing
Pakets are:
3 way hand shake initiate TCP connection
client server SYN
sever client SYN ACK
client server ACK
Hello,
Is there a command in FreeBSD that ejects a USB disk like in Windows?
I mount the USB disk with automount daemone (amd).
I have a script that access this disk and force an umount at the end
of the script.
But anyone accessing the disk will have amd re'mount the disk and at
the time I
I would like to have a command that makes the disk/USB port physically
inaccessible, so at the end of the script a user cannot access the
disk again.
you should be able to use camcontrol's eject or stop command
on that device, usually /dev/da[0-9].
I tried that. That would eventually
Like in Windows after stopping a USB mass storage device, one has to
unplg and replug the disk if he wants to access it again.
What about just unplugging the disk when you are done with your skript
and do not need the disk any more?
I may not be around when the script finishes...
Olivier
Is there a command in FreeBSD that ejects a USB disk like in Windows?
I mount the USB disk with automount daemone (amd).
You have to umnount it using the umount command
usually umount /mountpount does the tick
The disk is mounted by automout daemon (amd), so any access to the
tcpdump tcp port 19 host 172.0.10.2
tcpdump tcp port 19 and host 172.0.10.2
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Hi,
I have the following issue with amd.
I want to write a script that will detect whenever a USB disk is
plugged in and then run a backup.
My configuration is described below.
File /etc/amd.map:
/defaultstype:=host;fs:=${autodir}/${rhost};rhost:=${key}
*
. They were purchased from Courtesy
Products and they are CV1. Please let me know if you would have any intereset
in these.
Thank you
Nicole
Nicole Orban
Assistant Executive Housekeeper
Hyatt Regency Crystal City
2799 Jefferson Davis HWY
Arlington, VA 22202
703-418-1234
individually wrapped with its own filter.
Please let me know if these would be any use to you.
Thank you,
Nicole
Nicole Orban
Assistant Executive Housekeeper
Hyatt Regency Crystal City
2799 Jefferson Davis HWY
Arlington, VA 22202
703-418-1234
Automatically turn on your PC.
It's a common problem, when using desktop hardware to run a server:
after a power failure, the machine needs human action to
restart. High-end desktops and server hardware often have a BIOS
setting to automatically start when power comes back. Using a low-end,
older
Hi,
To all the things that follow (sorry about top reply) I'd add a clever
configuration of tcpwrapper (/etc/hosts.allow) whenever it is
possible: allows to open a service to a list of given clients only.
It is just another layer of security.
Olivier
So far I have had FreeBSD systems only in
2) knowing the file system from 1), how to check the remaining space
in the file system?
You normally just start writing and deal with the errors that come from full
file systems when they show up. The C functions set errno accordingly.
The reason is that the system lies about the
I'm thinking to install FreeBSD on my old PC.
---
Processor: Intel Celeron 1.3 GH
RAM: 192 MB
---
Is my hard ware sufficient?
Sufficient to do what?
Until not so long ago, my DNS server was a PIII 550 MHz, with
something like 120 MB RAM, serving about 150 clients.
I changed the hardware
Hi,
I am writing a C application that would store files in a directory.
Before it starts storing files, I would like the application to check
is there is enough space in the file system.
How to:
1) knowing the name of the directory, how toknow the file system it
belongs to (not considering
src.conf(5) says:
The values of variables are ignored regardless of their setting; even
if they would be set to ``FALSE'' or ``NO''. Just the existence of an
option will cause it to be honoured by make(1).
So in my /etc/jail-src.conf I have a couple of options like this:
WITHOUT_ACPI
Installing a fresh BSD System gives me among others the option
'X-User'. In the books I just find a hint its without source code,
what I really dont need.
But is there anything else but the source code what I will miss
later for a desktop installation or a simple webserver?? Anybody
tried
possibly try fsck - i don't know (my first FreeBSD was 5.*) but maybe UFS
changed a bit?
Nope, I have had machines that I upgraded from 4 to 5 and 6 without
changing the hard disk, and without changing the file system.
So, I installed this drive as the second hard drive in a FreeBSD 6.2
Hi,
I have googled for a very long time, but I haven't found any useful
howto on this issue. Well, there is
http://www.cultdeadsheep.org/FreeBSD/docs/Quick_and_dirty_FreeBSD_5_x_and_nss_ldap_mini-HOWTO.html
but that seems to be a bit confusing an not up-to-date. I guess it
Hi,
I am upgrading an application that was runinng on 4.11, and I try to
port it to 6.3.
The application is using a couple of escape control sequences to
modify the cursor on the console.
On 4.11 it was OK, but on 6.3 the cursor changed from block type to
overscore (? same as underscore but
On 4.11 it was OK, but on 6.3 the cursor changed from block type to
overscore (? same as underscore but abov ethe character). This is not
I just doubled check, it used to be underscore on 4.11, not block.
Olivier
___
freebsd-questions@freebsd.org
bytes on network. i want to write my own www server, actually i already
wrote, with working everything except post.
things got much nicer than using apache+cgi, it's 100 times simpler and
faster to have it all in single program
when it will have this tested, i will make cutdown version
Hi,
my program gets from the browser:
This part is not explicit enough. How is that what you get? Are they
the bytes on the network between your browser and the HTTP server? Are
they data decoded by your program?
If it is the bytes on the network, I have no answer.
If it is the data decoded
/libexec/ld-elf.so.1: /usr/local/bin/perl5.8.8: Undefined symbol
PL_exit_flags
You may consider updating every Perl modules after you have upgraded
Perl 5.8.8.
Olivier
___
freebsd-questions@freebsd.org mailing list
Hi,
I am having problem with /usr/sbin/makemap hash on huge databases
under FreeBSD 5.5 and 6.3 while it is working on 4.11.
By huge I mean around 380,000 lines in the /etc/mail/access file.
After approximately 375,000 lines added into access.db I get:
makemap: access.db: line 375135: key
I am just under 300K lines in that map at present. While I have
always wondered where hash was going to break, I hadn't found the
limit yet.
And what is even more weird is that last night it managed to build the
hash, with yet about 385,000 lines in /etc/mail/access...
Thanks any way.
A second thought...
I want to setup a service such that sending a mail to say
[EMAIL PROTECTED] with a list of links per line results in my machine
downloading the files at these links replying with all these files
attached.
So you have any direct connection to the machine that will host
I want to setup a service such that sending a mail to say
[EMAIL PROTECTED] with a list of links per line results in my machine
downloading the files at these links replying with all these files
attached.
Although I don't know of such a service (I recall hearing about such
service ages
1) is there an upper limit to configuring a number of alias addresses?
I have a machine with 200+ IP without any problem.
2) if an interface is configured with an alias address, then what
address is shown on the traffic leaving this interface? So, for
example, if I were to ping this machine
Hi,
Are there any smart ways to decide how to size /var/mail.
I plan to put it on a seperate partition ... or shouldn't I?
How much mail storage do you plan to offer per user, how many users do
you plan to have?
Multiplp, add 50% margin and you have it.
Olivier
I need to know which is the latest stable FreeBSD release(6.2 ?) and
does it goes well with Dell 2950 ?
6.3 should be the latest stable.
And yes about the 2950, with the bellow remarks (I asked the same
question one month ago, check fro the tread about dell Power Edge
2950).
Olivier
Hello,
I am working on a Postfix email server for virtual domain. I was
requested to implement quota per domain, not per user, have you ever
seen something like that?
Best regards,
Olivier
___
freebsd-questions@freebsd.org mailing list
Hello,
I am working on a Postfix email server for virtual domain. I was
requested to implement quota per domain, not per user: the sum of
mailboxes of all the users in the domain must not exceed the quota set
for the domain.
(All I could find was example where all users of the domain had a same
Due to some security purposes, I need to re-generate all the passwords
for my users from the file /etc/passwd.
I use the following script to generate passwords:
http://www.cs.ait.ac.th/cgi-bin/phi-soft/gen-multipasswd
I could send it to you as Perl script, so you could generate 500
Due to some security purposes, I need to re-generate all the passwords
for my users from the file /etc/passwd.
I use the following script to generate passwords:
http://www.cs.ait.ac.th/cgi-bin/phi-soft/gen-multipasswd
Or use:
How do I use the above script for my machine which I access remotely by SSH.
Yuck. I could email you a list of 1000 random strings?
I could send it to you as Perl script, so you could generate 500
passwords in one run, or you call the web page enough number of times.
That will be great!
Hi,
2008-01-14 09:30:37.074087500 rblsmtpd: 123.20.89.67 pid 72121: 451
http://www.spamhaus.org/query/bl?ip=123.20.89.67
Just one comment, in my installation of SpamAssassin, it reports in
syslog as spamd, not at rblsmtpd. This looks like logs from the
rblsmtpd program that is not
I know this is an odd thing to worry about, but is this normal? Since
the spam doesn't even seem to be reaching spamd, I'm guessing that
the real hero is pf, which must be blocking 99.99% of spam at the
packet level.
I don't know how you configured pf, but since I use the black list
Hi,
I need to monitor the network traffic from specific IP addresses.
I need to be able to deduce the applications that are running
that are generating the traffic.
Unless you have full acess to the machine with that specific IP, you
will never be able to do more than guessing what are the
Hi,
I am a computer science student taking the operating
systems course. All of our assignments are supposed
run on Linux and I don't have
a Linux machine.
Programming the operating system is very dependent on the operating
system.
Talk your prof to accept a project based on FreeBSD, that
I am saravana, I am using FreeBSD 4.9 Release, in that setfacl command
was not found. So I need found source package for that command to
compile and use it. Can you send the name link to download the
package.
I am no expert but from the man page of setfacl I see:
HISTORY
Extended
Has bind a visible advantage in the response time?
Maybe not in response time, but certainly in centralisation: you only
maintain one DNS instead of every machine.
Olivier
___
freebsd-questions@freebsd.org mailing list
Again, I'm not trying to convince you otherwise or say that using
BIND is a bad idea. It's just that I'm curious because we use
Squid for this sort of thing, and I was wondering why BIND instead?
I think another issue is that Squid will only filter HTTP/FTP
connections, while DNS would allow
Hello,
This is just to confirm that Dell Power Edge 2950, with Quad Core Xeon
E5420 is OK with FreeBSD 6.2/6.3.
TIA,
Olivier
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe,
As has been hashed out in -ports@ over the last few days there is at
least a need to examine weither or not the current ports system should
remain as is or potentially be re-engineered in the future (estimates
if and when needed vary from ASAP to 10-15 years). I have
volunteered to
Hi,
I am trying to upgrade /usr/ports/math/R
I am using gcc 4.2.3 because at some stage it was needed by some other
ports, so it is now the version in use.
But I have the following problem with the fortran libraries.
gcc42 -std=gnu99 -I. -I../../src/include -I../../src/include
This was my problem , I was running a Plone/Zope site in My FreeBSD
machine , it cant find the program
look for xpdf in the ports it has pdftotext.
Olivier
___
freebsd-questions@freebsd.org mailing list
ssh using key authentication and sudo configured to allow a certain
user to run the needed commands and only the needed commands as root.
rsh? Are you living in a cave? :)
Thanks for the replies.
The original script was written at the cave era, only I am trying to
improve it today.
Would
Hi,
Part of (un)registerings users on my system consists in connecting to
various servers to add the user account to some services:
Registering users is done wia a web page, and the web server will
remote execute a script on the mail server to add the users in the
aliases and run newaliases,
Hi,
How can I incorporate my patch into the portupgrade system, so that an
upgrade of Xpdf will apply my patch? If I download the bzip file,
apply the patch, re-bzip the sources, and then try to force an
upgrade, the checksum fails (as expected).
How does one do thes properly?
Hi,
I have a project where I should set-up a mail server for approximately
12000 users, 4000 virtual domains, 15000 messages per day, 700 MB
traffic per day.
The machine should run Postfix, courrier-imap and a web mail (probably
squirel), Apache 2, spamassassin, clamav, greylist
What type of
Hi,
On a mail server, I do some update of some lists on a daily basis,
using wget.
I am testing the script that will do the update, including some
timestamping with wget (hopefully). I want to be able to test various
combinations of parameters of wget for robust transmission, so I want
to
In the United Stated, cable television and Internet provider
Comcast has recently come under criticism for managing bittorrent
traffic by sending TCP RST packets to those who are over some
unannounced traffic limit (i.e. hogging the bandwidth).
Well I only plan to reset connections
Hi,
I have Claws-Mail and spamd installed (from ports) and although I
have been using this combination -I've been been manually marking
all spams as 'spam'- for more than 2 months, still _no_ spam
message is detected.
I've followed the instructions on Claws/spamd wiki. I've got
I am usually not the one to bring up these things but I feel very
strongly about this. Starting Monday, November 12 this website is
offering a give one get one deal. I believe the money will be well
invested. YMMV
http://xogiving.org/
That is a difficult issue, while this is an
Is there a clever way to run make delete-old in /usr/src so that (y)
will be the default answer? Otherwise it's pressing y 437 times in my
case...
yes | make delete-old
Olivier
___
freebsd-questions@freebsd.org mailing list
I prefer to do [build|install]world prior to building the kernel
with the new installed tools.
Even with an outsynced system, the most common tools to be affected
are ps and top. Even when a kernel fails to boot all the
way through, you can still rebuild a new kernel after booting
with
Hi,
Of course, just setup a virtual host in your httpd.conf file point
the dns to the same ip. Apache will take care of the rest.
To be a litthe bit more precise, in your Apache configuraton you need
something like:
NameVirtualHost 10.0.0.1
VirtualHost 10.0.0.1
ServerName
Hi,
I am a lame Bourne sheel programmer, how to write:
while [ ( $? -ne 0 ) -a ( $retry -gt 0 ) ] ; do
that should execute as long as $? is not null and $retry is greater
than 0?
TIA,
Olivier
___
freebsd-questions@freebsd.org mailing list
Hi,
On my mail server, I am using sendmail as transport agent procmail to
deliver the mail to the final user mailbox.
Procmail runs the mail trough SpamAssassin, and it some time happens
that teh SpamAssassin process goes to the wild. I have seen that
happening when the user disk is over quota
Jeff,
I set up ntpd on FreeBSD 6.2 and am getting complaints from ntpd that
there is no route to such and such address. It gives what appears to be
an interface card address.
As a general rule, please copy/paste the error message.
The
rest respond without hesitation, both to dig and ping.
Hi Jeff,
Here are the console messages:
ntpd (706) send to(2610:1f8:d8:2:216:cbff:fea3:4b2e:) no route to host
(2001:4830:1210:0;280:10ff:fe00:48b9)
#are these ipv6 addresses? Or are they expecting authentication and
refusing connections?
The answer seems
The quite annoying side-effect is having to type 'exit' twice to get out
of a su shell or screen.
It seems that another anoying effect is that it breaks scp(1)
Best regards,
Olivier
___
freebsd-questions@freebsd.org mailing list
Hi,
I am using nessus from the ports on FreeBSD 6.2.
The daemon seems to be runing fine, but the cient core dumps.
syslroot103: pkg_info |grep nessus
nessus-gtk-2.2.9_1 A security scanner: looks for vulnerabilities in a given ne
nessus-libnasl-2.2.9_1 Nessus Attack Scripting Language
Hi,
try the amanda users email group...seems to be someone else having similar
problems, or is that that you as well??
If that was a couple days ago, it was me, only I went a bit further in
investigation :)
Thanks,
Olivier
___
Hi,
I am asked to build a virtual (couple of thousand of domains) email
server: smtp, imap, pop and web mail.
Sendmail is not the best choice, any sugestion about the various tools
of choice for every components?
So far I have only run single domain servers.
TIA,
Olivier
graphics/tonicpoint ?
Seems that tonic is not available anymore, Google bought them out.
Olivier
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
Hi,
I am going further with that sendsize error, after recompiling with
debug enable, here is the error I get in sendsize:
(gdb) run
Starting program:
/usr/ports/misc/amanda-client/work/amanda-2.5.1p3/client-src/.libs/sendsize
OPTIONS maxdumps=1;hostname=ufo1000;
OPTIONS
GNUTAR /ftp 0
Linux doesn't normally use master.passwd. If I recall correctly, it
uses /etc/shadow instead (but I don't have such a box at hand right now
to check). And yes, the internal format is different (and, again, I don't
remember details).
If I am not wrong, NIS does not know anything about
And, having evidently done the *wrong* thing, how do I fix the
added users so they now appear in NIS?
cs /var/yp
make
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
Hi,
I just upgraded amanda-client and gtar:
gtar-1.18_1 GNU version of the traditional tar archiver
amanda-client-2.5.1p3_1,1 The Advanced Maryland Automatic Network Disk Archiver
on a 5.5 server
FreeBSD ufo.cs.ait.ac.th 5.5-RELEASE-p15 FreeBSD 5.5-RELEASE-p15 #7: Wed Oct 3
10:17:29
Hi,
the *why*. Is there a best type to save me from this? Do any of
these power supplies come with scripts to shutdown a Unix {or
Linux} computer? Is there a UPS that is designed for heavy use
and a very short (5- to 10-second) uptime? I'll need one that can
Hi,
Sorry for an unusual request - does anyone know of software that is
able to split an mp3 file into multiple chunks at specified locations
(doesn't have to have gui, actually best if it didn't), one that works
under FreeBSD?
Not sure what you call specified location, is that at certain
Hi,
I noticed that PHP4 port has been having some vulnerabilities for some
time now.
Will there be a correction relased any soon?
Best regards,
Olivier
___
freebsd-questions@freebsd.org mailing list
Doubtful, given the fact that php4 will reach EOL December 31. You
should plan on upgrading to php5.
Thanks, now that lads to the second question, what will I break when
updating? What should I be carefull about? I have several servers,
managing quite many sites, with a lot of home made
My setup is basically everything gets pumped though procmail and ends up
in an Courier imap directories.
I am using SpamAssassin (from the ports) inside procmail that
quarantine every suspect messages and send a daily summary:
http://www.cs.ait.ac.th/laboratory/email/quarantine.shtml
Best
Is Apache rotatelogs suitable for handling large volumes of
access logs, i.e. around 50K requests per hour at _peak_ time which is
1.2M requests per day. According to Apache website
(http://httpd.apache.org/docs/1.3/logs.html#rotation) this becomes
about 120MB in size per day.
In another
One thing that comes to my mind. Each Sunday I have a script which
makes a full dump of the HD to a back-up USB drive. Last weekend
someone cleaining the computer room, must have accidentally powered
off the USB drive. As a result, the dump has not been completed
because the USB drive was not
Hi,
I have a server with apache that serves pages to an intranet. Now
we want to add another server application (cvs and pgsql) to another
intranet. Of course we can buy a new server to do that, but i want to
know if i can add a new ethernet card to the current server and force
Hi,
I would like to use LDAP to manage users printer quota.
Printers can be located on several servers, so I need a way to update
the information without ceating deadlocks/overwrites.
Is there a way for LDAP to do atomic action ? That is increase the
value of one reccord by a certain amount,
Hi,
I have an HP2200 printer connected to a 6.2 box via USB.
I would luke to read the page count. I know the PCL sequence to do
that, but I am unsure about the way to access the printer.
The pinter shows up at /dev/ulpt0, I can redirect text to it for
printing, using cat file.ps /dev/ulpt0
But
What is device with designation md0?
md is memory disk
Olivier
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
I think it may be a problem there, do you have any how to for that configur=
ation, in case I can double check. Off course besides the info provide at o=
penldap.org. Thanks in advance.
Sorry, I am pretty new with LDAP too :) I have no documentation beside
the one I found from Googling around.
Hi,
I built it by doing:
cd /usr/ports/net/isc-dhcp3-server make install
the version = isc-dhcp3-server-3.0.5_2 for both, could their be code changes
if the _2 did not change?
There should not be any change BUT... I imagine the aplied patches
could be different depending on FreeBSD
Hi,
From a Bourne shell script, how to get (and test) the group id of the
user that is executing the script?
Best regards,
Olivier
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Jonathan,
other than telling him well this is the new SCSI, i am wondering
if anyone else is successfully using this technology thus far.
Well you'll have to accept the fact that it is the new SCSI and you
have to run with it.
I bet you will have hard time finding a server with parallel SCSI.
I am a newcomer to the FreeBSD world. I am trying to implement a
openLDAP installation. It all went ok with the SASL and SERVER
install in conjunction with BDB, yet when I try starting the service
using /usr/local/libexec/slapd or /usr/local/etc/rc.d/slapd
start, the service does not start. I
Hi,
I am trying to install mailman from the ports.
I have different machine for the mail server and the web server and I
am trying to figure if this configuration is workable.
The MTA is sendmail, where could I find configure example?
Best regards,
Olivier
Hi,
I have a backup of the old system and am using that to trouble
shoot. I have narrowed it down to the dhcpd binary. If I put in
the newer binary built with p7 it does not work with windows
2000. If I put in the old binary it works fine.
First question would be: how did you
I could not send any mail to that mail server
Freebsd.org
But I could deliver mails to all other mail servers?
Tue 2007-08-14 13:41:32: -- 450 4.7.1 Client host rejected: cannot find
your hostname, [91.103.27.98] Tue 2007-08-14 13:41:32: -- RCPT
To:[EMAIL PROTECTED] Tue 2007-08-14
My mail server has 2 static IPs. Just I use Dual view Domain RRs. Can that
be the cause?
Then there is an issue there, because the rDNS problem is on
91.103.27.98 (see error message) and the IP fro your machine are .90
and .97
Anyway, your machine has no rDNS.
Olivier
We are trying determine cost and benefits of supporting FreeBSD
platform for OEM market. Does any one have data on the installbase
for FreeBSD Embedded in 3rd party applications and appliances? We
are looking for ball park numbers.
There is no requirement to tell anyone else that you're
Hi Luis,
I am looking to replace my current DHCP server with the ISC. Right now
I have to servers which are working with split scopes. Some of my
schools need over 600 IP's, so I have the school with a 255.255.240.0
which give them 16 Class C, network, so to avoid conflicts I assign the
Hi,
On a new system that I am installing, I found out that the new version
of sudo version 1.6.9p3 clears the environment variables.
It was not the case on previous version like version 1.6.8p12.
I tried to understand what is the configuration to perform like it was
before, I tried to add the
env_reset now seems to be on by default. you could turn it off if you
need to or fiddle with the env_keep and env_check lists.
That's what I mean, how to turn it off.
Olivier
___
freebsd-questions@freebsd.org mailing list
I think this was it. I originally used sudo but second time I did it as su
and it went very well. Thank you!
I always build ports using sudo (I have not been using su for years).
Olivier
___
freebsd-questions@freebsd.org mailing list
What should I be running when updating my sources? RELENG_6 or
RELENG_6_2? Or is there no difference?
I think that right now RELENG_6 and RELENG_6_2 are the same, but when
6.3 comes out, RELENG_6 will be the same as RELENG_6_3 and RELENG_6_2
will be something else.
When running RELENG_6, how
I am using named version 9.3.3 which comes with FreeBSD system (i.e. was
not installed from ports).
I know that in order to upgrade bind, I should cvsup sources and then go
through the entire procudure of updating the system, installing kernel,
etc. However, I tend not to use cvsup any
Stop in /usr/ports/dns/bind9.
** Command failed [exit code 1]: /usr/bin/script -qa
/tmp/portinstall.12022.0 env make
** Fix the problem and try again.
** Listing the failed packages (*:skipped / !:failed)
! dns/bind9 (unknown build error)
--- Packages processed: 0 done, 0
Hi Chuck,
With some delay, several answers together.
For the example I gave, I am of course authoritative.
Are you? Depending on which servers I query, I either get an
NXDOMAIN, an answer with no authoritative nameservers listed, or the
results you've shown. That implies that there is
301 - 400 of 759 matches
Mail list logo