Warren Block wrote:
> On Thu, 19 Apr 2012, Matthias Apitz wrote:
> > the problem with (this) cardreader seems to be that the card must
> > already inserted at boot time; a later switch to another card, for
> > example from a card with 'msdosfs' to a card with 'ext2fs', gives the
> > problem in my
On Thu, 19 Apr 2012, Matthias Apitz wrote:
El día Thursday, April 19, 2012 a las 08:29:52AM -0600, Warren Block escribió:
On Thu, 19 Apr 2012, Matthias Apitz wrote:
the problem with (this) cardreader seems to be that the card must
already inserted at boot time; a later switch to another card
On Thu, Apr 19, 2012 at 1:59 PM, Matthias Apitz wrote:
> What do you expect exactly from this command? The actual shell will open
> /dev/da0 for writing + truncating and will connect (dup) its fd 1 to it;
> then it will execute 'true', perhaps as buit-in; so what?
>
As he stated, it forces a GEO
El día Thursday, April 19, 2012 a las 08:29:52AM -0600, Warren Block escribió:
> On Thu, 19 Apr 2012, Matthias Apitz wrote:
>
> > the problem with (this) cardreader seems to be that the card must
> > already inserted at boot time; a later switch to another card, for
> > example from a card with '
On Thu, 19 Apr 2012, Matthias Apitz wrote:
the problem with (this) cardreader seems to be that the card must
already inserted at boot time; a later switch to another card, for
example from a card with 'msdosfs' to a card with 'ext2fs', gives the
problem in my first mail; don't know if this is a
El día Thursday, April 19, 2012 a las 09:42:22AM -0700, per...@pluto.rain.com
escribió:
> "Julian H. Stacey" wrote:
>
> > > what does lsvfs show ?
> >
> > Maybe try: dd if=/dev/da0s1 count=20 of=/tmp/t ; file /tmp/t
> > (it show interesting stuff on my /xp anyway ).
>
> Easier: file -s /dev/
"Julian H. Stacey" wrote:
> > what does lsvfs show ?
>
> Maybe try: dd if=/dev/da0s1 count=20 of=/tmp/t ; file /tmp/t
> (it show interesting stuff on my /xp anyway ).
Easier: file -s /dev/da0s1
___
freebsd-questions@freebsd.org mailing list
http://li
> > what does lsvfs show ?
>
> Maybe try: dd if=/dev/da0s1 count=20 of=/tmp/t ; file /tmp/t
> (it show interesting stuff on my /xp anyway ).
kldstat # I guess that shows you have the module linked in too ?
or else already compiled in
config -x /boot/kernel/kernel | grep ext
so a puzzle if all t
> what does lsvfs show ?
Maybe try: dd if=/dev/da0s1 count=20 of=/tmp/t ; file /tmp/t
(it show interesting stuff on my /xp anyway ).
Cheers,
Julian
--
Julian Stacey, BSD Unix Linux C Sys Eng Consultants Munich http://berklix.com
Reply below not above, cumulative like a play script, & indent wi
> # kldload ext2fs
> kldload: can't load ext2fs: File exists
what does lsvfs show ?
Cheers,
Julian
--
Julian Stacey, BSD Unix Linux C Sys Eng Consultants Munich http://berklix.com
Reply below not above, cumulative like a play script, & indent with "> ".
Format: Plain text. Not HTML, multipart/
Hello,
I'm trying to mount an ext2fs in 10-CURRENT with:
# fdisk /dev/da0
*** Working on device /dev/da0 ***
parameters extracted from in-core disklabel are:
cylinders=486 heads=64 sectors/track=32 (2048 blks/cyl)
parameters to be used for BIOS calculations are:
cylinders=486 heads=64 s
On Tue, Aug 25, 2009 at 12:17 AM, Jeronimo
Calvo wrote:
> Thanks a lot fellas!! problem resolved!!!
Did you try to unmount the filesystem?
I applied the patch against 7.2-RELEASE-p3 and I can't unmount it: Device busy.
Anyone else with this problem?
Cheers
>
> On 24/08/2009, Gonzalo Nemmi wro
On Tue, 25 Aug 2009 13:33:59 +0200, Mark Stapper wrote:
> Don't forget to reapply the ext2 patch... ;-)
And of course keep in mind that kernel and world (userland) have
to be of the same version, e. g. if you upgrade your sources to
7-STABLE, recompile kernel and world and install them. You'll
fi
I have as well this in the other hand: heheheh, THE BIBLE!
[image: 51dtdR9r6RL._SL500_AA240_.jpg]
2009/8/25 Mark Stapper
> Jeronimo Calvo wrote:
> > hi Mark!
> >
> > Im using FreeBSD 7.2-RELEASE... but im not sure about the "userland",
> > is currently fresh installed, just compiled the KERNEL
Jeronimo Calvo wrote:
> hi Mark!
>
> Im using FreeBSD 7.2-RELEASE... but im not sure about the "userland",
> is currently fresh installed, just compiled the KERNEL to add ext2fs
> support and installed the patch for the 256-inode... nothing else...
> But I will take your advise and upgrade my kerne
hi Mark!
Im using FreeBSD 7.2-RELEASE... but im not sure about the "userland", is
currently fresh installed, just compiled the KERNEL to add ext2fs support
and installed the patch for the 256-inode... nothing else... But I will take
your advise and upgrade my kernel to STABLE (as I think it will b
Actually, im just compile it and restart it... seems to be working fine
now...
By the way... who do i do that?? is that necessary?
cheers!
2009/8/25 Mark Stapper
> Jeronimo Calvo wrote:
> > Hi folks, im migrating from Linux to BSD, and i found my first problem...
> > First of all, i did save m
Jeronimo Calvo wrote:
> Hi folks, im migrating from Linux to BSD, and i found my first problem...
> First of all, i did save my /home from my old Linux distribution on another
> HD, ext2fs partition /dev/ad6s1... I can correctly see the drive from
> sysinstall.
>
> I read about compiling the KERNEL
On Monday 24 August 2009 6:44:24 pm Jeronimo Calvo wrote:
> True you are right... I was using the incorrect syntax and the
> incorrect word hehehhe
>
> well I did try as well using the correct procedure:
>
> Thats the result (mounted but not accesible)
>
> [root@ /media/DATOSWIN]# mount
> /dev/ad8s
Thanks a lot fellas!! problem resolved!!!
On 24/08/2009, Gonzalo Nemmi wrote:
>
> On Monday 24 August 2009 6:44:24 pm Jeronimo Calvo wrote:
> > True you are right... I was using the incorrect syntax and the
> > incorrect word hehehhe
> >
> > well I did try as well using the correct procedure:
> >
True you are right... I was using the incorrect syntax and the incorrect
word hehehhe
well I did try as well using the correct procedure:
Thats the result (mounted but not accesible)
[root@ /media/DATOSWIN]# mount
/dev/ad8s1a on / (ufs, local)
devfs on /dev (devfs, local)
/dev/ad8s1e on /tmp (uf
Maybe just malquoted, but...
On Mon, 24 Aug 2009 20:20:29 +, Jeronimo Calvo
wrote:
> # mount -t extfs2 /dev/ad6s1 /ext2
> mount: /dev/ad6s1 : Operation not supported by device
The command should include -t ext2fs, not extfs2, as far as I
remember. I haven't run Linux for almost 10 years now
Judging by your uname output, the #0 should be #1 if it's reading a re-
compiled kernel. I would double check that you used the proper
KERNCONF for make buildkernel and make installkernel.
For example, I recompiled my kernel and note the output:
[r...@arthur /var/account]# uname -a
FreeBSD a
Hi folks, im migrating from Linux to BSD, and i found my first problem...
First of all, i did save my /home from my old Linux distribution on another
HD, ext2fs partition /dev/ad6s1... I can correctly see the drive from
sysinstall.
I read about compiling the KERNEL in order to add Ext2fs support u
> # mount -t ext2fs /dev/ad0s8 /mnt/
> # ls /mnt
> ls: /mnt: Bad file descriptor
Weird.
I can mount ext2fs on 7.0 (and previously on 6.0 and 6.2) and
things mostly work. In the past I had ext2fs on both primary
and extended slices (or whatever the preferred terminology is).
This is on AMD64 with
On Saturday 05 July 2008 06:01:36 Nejc Škoberne wrote:
> Hey,
>
> >> ls -la / | grep mnttest
>
> Can you paste output of this command?
>
> > sysid 5 (0x05),(Extended DOS)
> > start 102398310, size 106446690 (51975 Meg), flag 0
> > beg: cyl 1023/ head 0/ sector 1;
> > end: cyl 10
On Saturday 05 July 2008 05:59:42 Roland Smith wrote:
> mount -t ext2fs /dev/ad0s1 /mnt
[EMAIL PROTECTED]:~ # mount -t ext2fs /dev/ad0s1 /mnt
[EMAIL PROTECTED]:~ # ls /mnt
ls: /mnt: Bad file descriptor
[EMAIL PROTECTED]:~ # ls -la / | grep /mnt
ls: mnt: Bad file descriptor
[EMAIL PROTECTED]:~ # dm
On Saturday 05 July 2008 06:01:36 you wrote:
> Hey,
>
> >> ls -la / | grep mnttest
>
> Can you paste output of this command?
>
> > sysid 5 (0x05),(Extended DOS)
> > start 102398310, size 106446690 (51975 Meg), flag 0
> > beg: cyl 1023/ head 0/ sector 1;
> > end: cyl 1023/ head 2
Hey,
ls -la / | grep mnttest
Can you paste output of this command?
sysid 5 (0x05),(Extended DOS)
start 102398310, size 106446690 (51975 Meg), flag 0
beg: cyl 1023/ head 0/ sector 1;
end: cyl 1023/ head 254/ sector 63
So the partition you're trying to mount is under an e
On Sat, Jul 05, 2008 at 05:46:09AM -0300, Gonzalo Nemmi wrote:
> On Saturday 05 July 2008 03:24:53 Nejc Škoberne wrote:
> > Hey,
> >
> > > Have you, by any chance, tried and suceded at mounting ext2fs on FBSD7?
> > > If you did, at least I'd know that it _
On Saturday 05 July 2008 03:24:53 Nejc Škoberne wrote:
> Hey,
>
> > Have you, by any chance, tried and suceded at mounting ext2fs on FBSD7?
> > If you did, at least I'd know that it _is_ possible :s
>
> It is possible, although I haven't used this on FreeBSD 7.0 y
20:47:28 inferna kernel: pid 8511 (doom.x86), uid 1001: exited on
> > signal 11
> > Jul 4 23:54:48 inferna su: gonzalo to root on /dev/ttyp3
> > Jul 5 00:38:24 inferna su: gonzalo to root on /dev/ttyp2
> > [EMAIL PROTECTED]:~ # umount /mnt
> > [EMAIL PROTECTED]:~
Hey,
Have you, by any chance, tried and suceded at mounting ext2fs on FBSD7?
If you did, at least I'd know that it _is_ possible :s
It is possible, although I haven't used this on FreeBSD 7.0 yet (only on 5.x
and 6.x releases).
I'd also try this:
mkdir /mnttest
mount -t ex
v/ttyp3
Jul 5 00:38:24 inferna su: gonzalo to root on /dev/ttyp2
[EMAIL PROTECTED]:~ #
Have you, by any chance, tried and suceded at mounting ext2fs on FBSD7?
If you did, at least I'd know that it _is_ possible :s
Thanks :)
No, I thought maybe th
0:21:13 inferna su: gonzalo to root on /dev/ttyp2
Jul 4 20:38:34 inferna kernel: linux: pid 8503 (doom.x86): ioctl fd=17,
cmd=0x5801 ('X',1) is not implemented
Jul 4 20:47:28 inferna kernel: pid 8511 (doom.x86), uid 1001: exited on
signal 11
Jul 4 23:54:48 inferna su: gonzalo to root on
Gonzalo Nemmi wrote:
Could somebody please throw me a pointer ...
i have followed every instruction on every book and/or how-to ... yet ...
What am I doing wrong??
[EMAIL PROTECTED]:~ # uname -sr
FreeBSD 7.0-RELEASE
[EMAIL PROTECTED]:~ # kldstat
Id Refs AddressSize Name
1 10 0xc0400
Could somebody please throw me a pointer ...
i have followed every instruction on every book and/or how-to ... yet ...
What am I doing wrong??
[EMAIL PROTECTED]:~ # uname -sr
FreeBSD 7.0-RELEASE
[EMAIL PROTECTED]:~ # kldstat
Id Refs AddressSize Name
1 10 0xc040 4dd878 kernel
2
On Wed, 22 Oct 2003 15:03:17 +0100
Miguel Gonçalves <[EMAIL PROTECTED]> wrote:
> Dear BSDers,
>
> I am about to move a workgroup server from Linux to FreeBSD.
>
> How stable is the FreeBSD support for ext2fs?
It should be able to read it with out probs. Not sure about writeing. Just
mount th
On Wed, 2003-10-22 at 07:03, Miguel Gonçalves wrote:
> How stable is the FreeBSD support for ext2fs?
First, if you're planning to migrate your server permanently, you're
probably better off reformatting in UFS: it's faster, and better for
error recovery. And computers that mount nfs/Samba/whateve
Hi Miguel!
Miguel_Gonçalves écrit:
> Dear BSDers,
>
> I am about to move a workgroup server from Linux to FreeBSD.
>
> How stable is the FreeBSD support for ext2fs?
I am currently using it happily (for the same purpose as yours).
Beware that the fsck_ext2fs needs to be re-linked if you want
Dear BSDers,
I am about to move a workgroup server from Linux to FreeBSD.
How stable is the FreeBSD support for ext2fs?
Best regards,
Miguel Gonçalves
[EMAIL PROTECTED]
--
http://www.fe.up.pt/~miguelg/
___
[EMAIL PROTECTED] mailing list
http://list
41 matches
Mail list logo
