Do you have any special characters in your password that might not be surviving
code-page translate?
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Wendell Lovewell
Sent: Friday, October 16, 2020 8:15 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Hi Len Sasso,
As mentioned, you can roll your own and invoke an ICSF service routine, or you
can use one of several z/OS crypto products. I work for ASPG, so am
particularly familiar with MegaCryption on z/OS. With MegaCryption this can be
done using the MGCMAIN utility or via an application c
Thank you Rajesh, but the job will be running on z/OS systems. I cannot
require any additional software like COZBATCH to be installed.
Best Regards,
Wendell
--
For IBM-MAIN subscribe / signoff / archive access instructions,
se
Please note too that the CSNBOWH implementation requires ICSF to be active,
but does not require any Crypto Express hardware, nor is it dependent on the
CPACF. It is a software solution that executes within ICSF.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Jousma,
DDname SYSPRINT is where IKJ messages go, not ddname SYSOUT :) This is
clearly documented in the z/OS TSO/E Messages manual.
On Sat, Oct 17, 2020 at 9:04 AM Joseph Reichman
wrote:
>
>
> HI
>
>
>
> I am dynamically allocating a new file which has 14 test units. I am
> getting
> a 035C meaning on
HI
I am dynamically allocating a new file which has 14 test units. I am getting
a 035C meaning one them is erroneous the doc says that message IKJ56231I
points me to the right text unit
I am running this under TEST. I allocated SYSOUT to the terminal DA(*). I
didn't see the message was wo
Dovetail work well for me.
A sample below:
//add jobcard
//SFTPPUT EXEC PROC=SFTPPROC
//SFTPIN DD *
host=sftp.ecurep.ibm.com
pwdsn="&SYSUID.SFTP.JCL(IBMPASS)"
user=""
. $script_dir/sftp_connect.sh < On Behalf Of
Wendell Lovewell
Sent: Friday, October 16, 2020 5:10 PM
To: IBM-MAIN@LIST
Thanks Kurt! I did see Ed's presentation, but at the time it was a solution
for which I didn't have a problem, so it stayed in the bit bucket.
Unfortunately, even with your and Ed's expert help, I'm still stumped. I just
don't seem to be able to get the "SSH_ASKPASS" to work, even after reading
On Fri, 16 Oct 2020 19:06:50 +, Jousma, David wrote:
>Yes.
>https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.1.0/com.ibm.zos.v2r1.csfb400/csfb4za229.htm
>
Also, convenient but not cryptographically strong:
https://www.ibm.com/support/knowledgecenter/SSLTBW_2.3.0/com.ibm.zos.v2r3
Look at File 900 on the CBT Tape
Jerry Whitteridge
jerry.whitteri...@albertsons.com
Manager Mainframe Systems & HP Non-Stop
Albertsons Companies
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Sasso, Len
Sent: Friday, October 16, 2020 11:54 AM
To: IBM-MAIN@LISTSERV.U
Yes.
https://www.ibm.com/support/knowledgecenter/en/SSLTBW_2.1.0/com.ibm.zos.v2r1.csfb400/csfb4za229.htm
_
Dave Jousma
AVP | Director, Technology Engineering
Fifth Third Bank | 1830 East Pa
Anyone know if a Checksum/Md5 file can be created on a IBM Mainframe?
If so, how?
Thank You and Please
Be Safe!
Len Sasso
Systems Administrator Senior
CSRA, A General Dynamics Information Technology Company
327 Columbia TPKE
Rensselaer, NY 12144
Office Hours: M-F 7 AM - 3:45 PM
Out-Of-Office:
Replying to my own post after opening a PMR - ServerPac version not available
at this time, but CBPDO is available.
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Richards, Robert B.
Sent: Friday, October 16, 2020 12:39 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Shopz
Disclaimer – I am not the CICS guy nor do I subscribe to a CICS list! 😊
My question is simple for those that may know:
Is CICS TS 5.6 orderable through ShopzSeries as a ServerPac order?
I attempted to use an inventory report and only 5.5 was listed as an update
path.
When I attempted without a
On Fri, 16 Oct 2020 09:27:07 -0400, Kurt Quackenbush wrote:
>
>> On 10/15/2020 8:36 PM, Wendell Lovewell wrote:
>>> Is it possible to code a proc that would invoke SFTP to transfer a
>>> file to or from a non-z/OS ftp server using only that server's public
>>> key and a userid/password combination
2 line CLIST in my ISPF CMDPROC concatenation named "W":
PROC 1 DSN
ISRDDN E &DSN
ISPF 3.4, just enter W as a line command. Definitely a time saver. :-)
Rex
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Graham Harris
Sent: Thursday, October 15, 2020 6:54
On 10/16/2020 9:16 AM, Kurt Quackenbush wrote:
On 10/15/2020 8:36 PM, Wendell Lovewell wrote:
Is it possible to code a proc that would invoke SFTP to transfer a
file to or from a non-z/OS ftp server using only that server's public
key and a userid/password combination like you would use for FTP
On 10/15/2020 8:36 PM, Wendell Lovewell wrote:
Is it possible to code a proc that would invoke SFTP to transfer a file to or
from a non-z/OS ftp server using only that server's public key and a
userid/password combination like you would use for FTP or FTPS?
Yes it is possible. Check out the
Classification: HCL Internal
Up to the "foreign host"
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Paul Gilmartin
Sent: Thursday, October 15, 2020 10:55 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Batch SFTP without client keys or USS files?
[CAUTION: This Email
Sunil,
You can find the PDF on this Marist page (first link on the page):
https://idcp.marist.edu/assembler-resources
In article you wrote:
> On Wednesday, 21 February 2018 at 09:18:12 UTC-5, Don Poitras wrote:
> > I worked with John back in the 90s when I was part of the languages
> > group
Many thanks to everyone who has contributed to this thread.
My tests corroborate the fact that selecting the "Display Total Tracks" option
affects the behaviour. Also the help for the panel (in particular for that
option) explains the behaviour I am seeing.
Ho hum. I live and learn. 46 years on
David,
There is a ZAP for TASID in File 980 on the CBTTAPE that fixes an issue
under z/os 2.2 and 2.3.
Joe
On Fri, Oct 16, 2020 at 4:55 AM David Crayford wrote:
> On 2020-10-16 1:43 PM, Tom Conley wrote:
> > On 10/15/2020 10:19 PM, David Crayford wrote:
> >> There's no need to install TASID. T
On 2020-10-16 1:43 PM, Tom Conley wrote:
On 10/15/2020 10:19 PM, David Crayford wrote:
There's no need to install TASID. The ISPF ISRDDN utility has an ENQ
dialog and is shipped as part of ISPF. From any command line enter
DDLIST;ENQ.
The major advantage to TASID is that it has a switch whi
23 matches
Mail list logo