Hi
I was in some loop and I invoked the SETFRR mltiple times thus when I
percolated I gave control to my own recevoery
Sorry :(
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
to:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of Binyamin Dissen
Sent: Thursday, June 16, 2016 2:47 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Recovery Routine not Percolating
On Thu, 16 Jun 2016 13:51:47 -0400 michealbutz <michealb...@comcast.net>
wrote:
:>Hi
:>
:>
:>
:>It seem
Hi
It seems my Recovery Routine a FRR for a SRB is getting called repeatdly
again again for the same abend at the same location.
I thought if I did SETRP RC=0 it should percolate and go to the next
recovery on the Chain I double checked and R1 points to the SDWA.
After the SETRP I do a
Well
I was able to Post the adress space seems like I am having issuing getting
the data there
First the Enivorment this code is a FRR of a SRB so I guess this primary the
Address space I scheduled it from is Home I am try ing to move it Seconday
the data is the SDWA
I have WTO it
Hi
I have a question about the 3rd paramter of IEAVRLS2 target_du_release_code
it is specfied as 4 bytes. Is this the same as the 4th paramter of the Pause
service release code this is specfied as being 3 bytes
Thanks
Hi,
Transferring data between 2 address spaces weather its MVCP/MVCS or AR mode
there is always the possibility of a S0C4.
What the best way of making sure the target Address Space is Swapped in.
Doing XMEM post to the target address space to do a SYSEVENT ?
Thanks
thanks that maybe a lot easier
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Rob Scott
Sent: Tuesday, May 3, 2016 4:36 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Dataset space information
If you need to find the space info for a
Hi
I am trying to access storage in a other address space
I am logged on to TSOA and am running the following code under TESTAUTH
L R5,0(,R5)
USING ASCB,R5
L
hi
would anyone know how to get the address or name of a PC rtn
Thsnks
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Hi
The documentation says that IEAVAPE2/IEAVPSE2 Can pause any Task or Srb in
the system
I got/allocated stoken or ASSBSTKN of the target address space I wanted to
pause via IEAVAPE2 successful return code
When I tried to run IEAVPSE2 the service never returned fronm the BALR it
at 6:27 AM, michealbutz <michealb...@comcast.net>
wrote:
> Hi
>
> The documentation says that IEAVAPE2/IEAVPSE2 Can pause any Task or
> Srb in the system
>
> I got/allocated stoken or ASSBSTKN of the target address space I
> wanted to pause via IEAVAPE2 successfu
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: S0C4 running Disasembler ASMDASM
You pointed the SYSPRINT DD statement to a RECFM=U data set? If you sent it
to SYSOUT, perhaps you'd get a more easily understood message.
michealb...@comcast.net (michealbutz) wrote:
If this helps great all it says is ASMDASM
running Disasembler ASMDASM
You pointed the SYSPRINT DD statement to a RECFM=U data set? If you sent it
to SYSOUT, perhaps you'd get a more easily understood message.
michealb...@comcast.net (michealbutz) wrote:
If this helps great all it says is ASMDASM bombed in the beginning of
the module
Hi,
I lost the source to one of my progs while running the Disassembler I got a
S0C4
below is my JCL PRINTPUT is the loadmodule PRINTPDS is a CSECT whithin
would anyone have an idea why
Thanks
your edit profile using the command RECOVERY ON.
//IBMUSER$ JOB
Of michealbutz
Sent: Tuesday, August 25, 2015 6:55 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: S0C4 running Disasembler ASMDASM
Hi,
I lost the source to one of my progs while running the Disassembler I got a
S0C4
--
For IBM-MAIN subscribe
Hi
would anyone know the RACF command syntax for a TSO id to be authorized to
use TESTAUTH
Thanks
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the
Hi,
If you have an extended console installed in your program via
MCSOPER/MCSOPMSG Does the issuing program get the message before it is
displayed on the console
If so can you delete before it is displayed via dom
Secondly can you search for specific message e.g. IEE... or the best
Hi,
I am at my wits end I have tried all sorts of things I am getting S0C4 at
right at the entry point to my SRB routine my SRB rtn does even take off it
goes directly to the FRR routine looking at the SDWAABCC its 940C4
*
So All I have to do is set what I want in the 24 bytes R2 is pointing to
thanks so much
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Rob Scott
Sent: Monday, June 15, 2015 11:02 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re:
Hi,
I am getting a S0C1 debugging my program under TESTAUTH when I do a Where to
see where I bombed It display's a 31 bit private address with the message
not whitin any program extents it look close to an area I did a storage
obtain sp=0 I thought adding a dsn LRECL=133 RECFM=FBM to SYSUDUMP
Hi,
will settting SPINRCVY to SPIN allow a CPU to sping endlesssly
as leaving out the SPINTIME paramter seem to make it default to 40 seconds
if not is there a way to make a CPU keep spining and have z/os take no
action
thanks
most of them. If this is not sufficient, then you will
need to find the info apar that describes how to ignore these S0C4 abends.
Jon Perryman
On Sunday, August 31, 2014 2:14 PM, MichealButz michealb...@comcast.net
wrote:
Thanks For your help I did confirm that my recovery routine was entered I
' ABEND is the first statement.
This will cause a S0C1 to be displayed if your ESTAE get's control. Your
ESTAE may be running in the wrong key to analyze the abend.
Jon Perryman
On Friday, August 29, 2014 8:19 AM, MichealButz michealb...@comcast.net
wrote:
I do establish the estaex
I do establish the estaex in the cmdproc the authorized program at the time it
is in problem state ASC primary I load a program BALR to it at the time of the
abend Iam in Supervisor state ASC AR storage key 0 does that matter
For my recovery routine to get control
What I wll do under
Yes it is I had a 306 abend in that the concatenation wasn't authorized my
esatex intercepted it and gave the use a chance to enter a valid dsn which I do
a SVC 99.
Later on however one of the progs goes XMEM via AR sac 256 and its in that prog
that I get a S0C4 Its all under the same TCB/RB
[mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of MichealButz
Sent: Wednesday, August 27, 2014 9:43 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Recovery routines
Yes it is I had a 306 abend in that the concatenation wasn't authorized my
esatex intercepted it and gave the use a chance to enter a valid dsn
Hi,
All of the sudden my TPUT in fullscr mode stopped working instead it is
displaying it in line mode followed by a 66D abend at one point I saw a
reason code 8
I ran it under tso test with no problems checked the return codes TPUT
STFSMODE STTMPMD STLINENO all were good and the buffer
Thanks that was it
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Norbert Friemel
Sent: Monday, August 18, 2014 2:51 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: PLPA enty
On Sun, 17 Aug 2014 22:37:48 -0400, MichealButz wrote:
Hi
Hi,
I put my loadlib library in LPALSTXX or specifically 01 that is what is
pointed to by LPA member on the active IEASYS
When I use TASID to look at LPA libs I see all of them except the one I
added
Am I missing something
Thanks
on
the volume specified;
(4) the DSN isn't a PDS. I.e. it is a PDSE or something else (sequential,
BDAM, VSAM). OK, those last are unlikely! grin/
On Sun, Aug 17, 2014 at 8:06 PM, MichealButz michealb...@comcast.net
wrote:
Hi,
I put my loadlib library in LPALSTXX or specifically 01 that is what
Hi,
I am dynamically allocating a loadlib the SVC 99 is successful however I get
a return code 8 when I try to open it
I move the ddname returned by SVC 99 before I open it here is the layout of
my DCB for the loadlib
DDCB DCB DDNAME=DDNAME,RECFM=U,DSORG=PO,MACRF=R
Just checked no messages
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of Jon Perryman
Sent: Wednesday, August 13, 2014 3:04 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Return code 8 from open
In this case, I would expect it to be in
300 Industry Drive
Pittsburgh, PA 15275
Direct: 724-517-2633
FAX: 412-490-9230
chuck.har...@thermofisher.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of MichealButz
Sent: Sunday, August 03, 2014 9:45 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Pittsburgh, PA 15275
Direct: 724-517-2633
FAX: 412-490-9230
chuck.har...@thermofisher.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of MichealButz
Sent: Monday, August 04, 2014 8:45 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re
that make sense to
concatenate. All you need is the two DD names.
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of MichealButz
Sent: Monday, August 04, 2014 8:45 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Dynamic Alocation
Of MichealButz
Sent: Monday, August 04, 2014 8:45 AM
To: mailto:IBM-MAIN@LISTSERV.UA.EDU IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: Dynamic Alocation question
Hi, does this mean If I want to concatenate MYTEST.LOADLIB I first
dynamically allocate it use use the ddname returned to me by SVC
I keep on getting 0360 In the S99ERROR filed
Invalid text key
I have the following question can I dynamically concatenate a dataset to one
the wasn't dynamically allocated and if so what would the text key be for
the ddname X'0001' DALDDNAM or X'0055' Return ddname
I have looked for
The way I understand the documentation coding a LIBRARIES(...) MEMBERS(
will automatically make the member from the that library LLA managed
I start S LLA,SUB=MSTR,LLA=01 where the lla parmlib member is CSVLLA01 I am
also assuming that the library has to be somewhere in the search order
MichealButz wrote:
The way I understand the documentation coding a LIBRARIES(...) MEMBERS(
will automatically make the member from the that library LLA managed
I start S LLA,SUB=MSTR,LLA=01 where the lla parmlib member is CSVLLA01
I am also assuming that the library has to be somewhere in the search
HI,
I was under the assumption that the following would enable CSVLLIIX1 for a
module
1) Defining the library and module in CSVLLA01
2) Starting LLA with the following syntax S LLA,SUB=MSTR,LLA=01
3) Defining with the exit with the following in my program
Hi,
I have a SRB which I schedule in a system address space I would like to make
it NON SWAPABLE in the srb I use SYSEVENT TRANSWAP,ENTRY=BRANCH
Before I prime R1 with a ECB
The documentation says the return code is in the last byte of R1 when
sysevent returns R1 doesn't point to the ECB
Thanks that’s what I wanted to know
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Walt Farrell
Sent: Monday, July 07, 2014 6:50 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: SVC 99 APF Authorized Library
On Mon, 7 Jul 2014
The original AUTHPGM/CMD came from the TSOLIB I then did a load from steplib
which had a non apf lb went to my recovery allocated a dsn got retddn that
should work according to Walt
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of
Hi,
I am getting 306 ABEND because my APF concatenation contains a NON
authorized Library. IS it possible to remedy this (as I have a recovery
routine)
By Dynamic allocation of the dataset ?
--
For IBM-MAIN
Hi,
I have a IKJPOSIT operand defined as a dataset the documentation says that
in VALIDCK exit the 3rd parameter is the address of second level message
I set R15 to 4 set the address of my message to in this field and all I get
is the standard IKJ message invalid dataset with 8 characters
@LISTSERV.UA.EDU] On
Behalf Of MichealButz
Sent: Monday, 30 June 2014 10:48 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: IKJPOSIT question
I am looking for to enter a string following a keyword towards that end I
use IKJPOSIT SPACE,VALIDCK=
I am looking to enter program name which is up to a 8 byte
I have changed it around and am testing it thank you
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On Behalf
Of Walt Farrell
Sent: Monday, June 30, 2014 9:46 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IKJPOSIT question
On Mon, 30 Jun 2014
Hi,
I have the following IKJ macros defined in my program for the IKJUNFKD I
initially use a eight byte character program name if this program name
proves to be
Invalid I look for the user to re-enter a dsn where it could be found
however I get a message back from the parser it's an invalid
An
I am looking for to enter a string following a keyword towards that end I
use IKJPOSIT SPACE,VALIDCK=
I am looking to enter program name which is up to a 8 byte character string
When I enter the string it comes back to me IKJ56712I INVALID KEYWORD
I don't understand this as
. But a program which uses
the STORAGE macro doesn't need to be in the list(s) mentioned. Only
programs which are linked as AC=1 and which you want to be invoked by
TSO with APF authorization active need to be listed.
On Fri, Jun 27, 2014 at 8:57 AM, MichealButz michealb...@comcast.net
wrote
@LISTSERV.UA.EDU] On
Behalf Of MichealButz
Sent: 27 June 2014 16:02
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re: IKJTSOxx Auth pgm cmds PC rtns
Rob,,
I can't use the TSO service facility IKJEFTSR ( I would like issue certain
non-authorized TSO commands) because my program is in IKJEFTSOxx
AUTHPGM/CMD
I
.
Rob Scott
Lead Developer
Rocket Software
77 Fourth Avenue . Suite 100 . Waltham . MA 02451-1468 . USA
Tel: +1.781.684.2305
Email: rsc...@rs.com
Web: www.rocketsoftware.com
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of MichealButz
Hi,
I know I get beat up for not doing my leg work but I researched this as best
I could
I am trying to invoke a PROFILE NOWTPMSG
And keep on getting a X3C in the reason code parameter register 15 has a
X14 the return code parameter is -1 X
The following is my
Hi,
I am setting the both VEPLMSG1 and VEPLMSG2 and their associated length set
R15 to 4 yet only VEPLMSG1 display's
The doc says that either rc 4 or 12 will display both
--
For IBM-MAIN subscribe / signoff / archive
Hi,
Would anyone know the command to use to find the data referenced by the
LISTA parameter in a IPCS dump
Thanks
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Binyamin the ST command dumps SDUMP parameter list offset +8 is the LISTA
address
Thanks
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of Binyamin Dissen
Sent: Monday, June 16, 2014 7:50 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: Re:
@LISTSERV.UA.EDU
Subject: Re: CSVQUERY Anomaly
On 9/06/2014 2:43 PM, MichealButz wrote:
I set a program in all 3 places of LPA modified,fixed,pageable via the
SETPROG console command however in all instances the CSVQUERY returns
a X'04' in ATTR3 byte
Indicating the program is in CSA. Additionally I added
:29 -0400, MichealButz michealb...@comcast.net
wrote:
It still is referenced by common below is my PROG01 entry
LPA ADD MODNAME(USERMOD) DSNAME(USER.TEST.LOAD) FIXED
So, did you add it via a SETPROG command or not?
--
Walt
Hi,
I set a program in all 3 places of LPA modified,fixed,pageable via the
SETPROG console command however in all instances the CSVQUERY returns a
X'04' in ATTR3 byte
Indicating the program is in CSA. Additionally I added the OUTVALID param
and it indicates that all three attribute bytes are
Hi,
During my testing I have found that whether my load library is in a APF
authorized steplib or not e.g. TSOLIB having it LLA managed automatically
generates the CSV019I abend
This doesn't make sense to me
Thanks
Hi,
I have an APF authorized library, That is LLA managed via LIBRARIES
statement in CSVLLAXX in parmlib
This library is in my steplib along with another APF authorized library
I am getting CSV019I (Library not accessed from a APF lib) abend even though
the dataset is in my APF
Hi
I have an APF authorized module running of out of the LNKLIST I try to load
a module from an non apf dsn concatenation and get CSV019I abend
I am in problem state key 8 when I do this
It seems than once I am in a APF concatenation library even though I am in
problem state key 8 I
Hi,
I am using TPUT in FULLSCR and I am getting a message back from my terminal
emulator VISTA3270 'INVLAID BUFFER ADDRESS RECEIVED 11E7 7F'
I am convinced there is nothing wrong with my TPUT output buffer as
1) I have check the contests running under TESTAUTH
2)
Hi,
I am doing TSO TPUTs in Full screen mode I copied some code from the
following URL www.tommysprinkle.com/mvs/P3270/sbaxlate.com
Which has code to translate a ROW and COLUMN into a sba (screen buffer
address)
I have 10 lines which I try to TPUT in lines 1 10 using the following
Hi,
I have TSO verify exit in which I am enabling LLA exit CSVLLIX1 exit and
then deleting it this seems intermittently to cause a 378-14 abend
Below is the code
*
* Add LLA exit CSVLLIX1 in case module is LLA
I have a module in APF authorized Library that is linkedit AC=1 when I load
this module shouldn't the high order byte of R1 be X'01'
Thanks
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email
Hi
I am setting a breakpoint at offset +0 in my program and getting a S0C1 at
location +E
The following is my scenario
TESTAUTH ISP.SISPLPA(ISPF) CP
LOAD MYLOAD.LIBRARY(MYMOD)
Q MYMO.MYMOD.+0
AT +0
GO à INTO ispf
Then from the ispf command line I do TSO MYMOD
And
Hi,
Would anyone know if the DCB represented by TCBJLB valid for the FIND macro
?
Thanks
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO
When scanning the TIOT IS there and end marker, how do I know I have
scanned all the DDnames ?
Thanks
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the
Hi,
I get the following results under TESTAUTH which I don't understand
000910 58F0 021C0021C 972 L R15,X'21C'
000914 973 TCBLOOP DS0H
Hi,
I know that TSOLIB adds a load library to the search chain and somewhere
there is a TCBJLB represented by this is there any way to determine
What TCB that would be.
Thanks
--
For IBM-MAIN subscribe / signoff /
or TCBJLB is reprensted by TSOLIB
On 1/29/2014 11:00 AM, MichealButz wrote:
I know that TSOLIB adds a load library to the search chain and
somewhere there is a TCBJLB represented by this is there any way to
determine
What TCB that would be.
Yes; take a dump of the address space and chase the TCB
On 1/25/2014 10:09 PM, MichealButz wrote:
Can I use the DCB represented by TCBJLB with the FIND macro as I am
getting a rc 4 not found , and I know the member is there
1) Is TCBJLB zero?
2) What happens when you use BLDL instead?
3) Show your work - do you have the correct member name
Hi,
I have tried a whole slew of macros with DCB specified by TCBJLB and none
give a clean return code from OPEN, CLOSE FIND,BLDL
The only one thing I was successful in using it was to get the offset within
the TIOT of that entry
Thanks
the FIND or BLDL and confirm that the
addresses are what you expect.Show all your code.
On Sun, 26 Jan 2014 10:32:55 -0500 MichealButz michealb...@optonline.net
wrote:
:Hi,
:
:
:
:I have tried a whole slew of macros with DCB specified by TCBJLB and none
:give a clean return code from OPEN
Hi,
I believe I don't have the right TCB to access TSOLIB I need the TCB for
IKJEFT01
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of MichealButz
Sent: Sunday, January 26, 2014 10:33 AM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject
Hi,
Can I use the DCB represented by TCBJLB with the FIND macro as I am getting
a rc 4 not found , and I know the member is there
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
Hi
I must be doing something wrong in my MF=L and MF=E open here is my code
As I get s0c4
Thanks
3 STEP_LIB DS0H
4 MVC STEPLIB(DCBLNGPO),STEPLIBX
5 LAR8,STEPLIB
6 OPEN
Hi,
I have a command processor using APF services
I put the entry in IKJTSO00 AUTHCMD and AUTHPGM
In Addtion I put an entry in ISPTCM with bit '20' indicating is a authorized
command and still
I get
Authorized command 'SPSWT'. Return code = 20. Reason code = 56.
Hi,
I am getting the following return code when try to add CSVLLIX1 with the
moaddr parameter of CSVDYNEX
The AMODE of the program is correct = 31 As The high order bit of the
address is one
With the dsname parameter I get a RC of 0 R15 = 8 , R0
= 827
Below is my code
Hi,
After using TESTAUTH many times I got the message listed below
I don't know what is meant by a APF Authorized Environment I tried running
the logon proc
With a APF Steplib and with out a Steplib however I still get the message
Thanks
IKJ57802I THE TESTAUTH COMMAND HAS BEEN
is described in the IBM
publications z/OS MVS Initialization and Tuning Reference and z/OS MVS
Programming: Authorized Assembler Services Guide.
Charles
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of MichealButz
Sent: Sunday, January 05
Hi,
Would anyone know to display TSO FULL SCREEN UNDER ISPF
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
Hi,
I have coded LIBRARIES with a MEMBER in CSVLLA00 of the module I would
like to monitor
I start LLA LLA=00
Then in a program I have the following CSVDSYNEX macro invocations
However CSVLLIX1 never gets invoked
*
CSVDYNEX
Thanks for your help
Two questions
Does BLDL or DESERV have anyway of differentiating between
TASKLIB/STEPLIB/JOBLIB I think not. TCBJLIB represents the first library
looked at be it TASK STEP or JOB
Second is there anyway of getting the associated DSN name
Thanks
-Original
I was confused by the documentation DCB= is the address where the DCB resides so
Instead of coding MVC WSDCB,TCBJLB
DCB= is a parm on the DESERV
DCB=WSDCB,
I coded L RX,TCBJLB
DCB=(RX),
That worked
When the TASK/STEP/JOB is specified I get X'05' for
scott_j_f...@yahoo.com wrote:
Michel,
Can you impart a big more information on what your trying to accomplish ?
Scott ford
www.identityforge.com
from my IPAD
'Infinite wisdom through infinite means'
On Dec 1, 2013, at 2:03 PM, MichealButz michealb...@optonline.net
wrote:
Thanks
The documentation says the TCBJLB points to a DCB of the first library
searched for a LOAD module for a program running under that task
I have looked at various TCB's PSATOLD ASXBFTCB and if that address were a
DCB at offset X'28' there would be a CL8 DDname
Thanks
Hi,
I having been using BLDL to get program directory information I found the
macro to not give correct results.
So I have moved on to DESERV FUNC=GET,PDSDE=BLDL_LIST unfortunately DESERV
FUNC=GET needs a real DCB address as opposed to the zero used invoking BLDL
Any suggestions
Thanks
...@gmail.com wrote:
On Sun, 24 Nov 2013 01:03:00 -0500, MichealButz
michealb...@optonline.net wrote:
I am running a TSO command processor that has authorized code the
load library is APF authorized.
I set it to the beginning of the search chain with TSOLIB
I also have the ISPF library
Hi,
I am trying to use 3270 Datastream Attribute Bytes under TSO using TPUT
could somebody point me to where these bytes and their meanings are defined
Thanks
--
For IBM-MAIN subscribe / signoff / archive access
Hi,
I am running a program under TESTAUTH which executes the TAR instruction,
after executing the inst under TESTAUTH I do a LISTPSW the CC is always 0
Well the DOC says in the ALET is 0 then a CC should be set at 8
I run the following instruction under TESTAUTH
LAM
Hi,
I am getting S0C4 reason code 4 after I return from a TSO verify exit
IKJUNFLD VERIFCK=PROGLOOK
Points to note
.I display all the registers on entry and they are the same on exit
with the exception of R15 which is 0
.Since a S0C4/4 says you are trying to access
and REGs
Also, is this an APF Authorized module? Is it running from an APF
Authorized Library? Is it marked RENT?
Thanks
Lizette
-Original Message-
From: IBM Mainframe Discussion List [mailto:IBM-MAIN@LISTSERV.UA.EDU] On
Behalf Of MichealButz
Sent: Tuesday, October 15, 2013 7:36 AM
To: IBM
Binyamin
The program is a TSO command processor so. using a TSOLIB is analogous
to ?
I did a TSOLIB ACTIVATE dataset right before running my code under test
*
BLDL 0,LIST_ADDR
*
thing. Try DE=NAME instead.
Bill
On Wed, 9 Oct 2013 18:44:52 -0400, MichealButz wrote:
Binyamin
The program is a TSO command processor so. using a TSOLIB is
analogous to ?
I did a TSOLIB ACTIVATE dataset right before running my code under test
*
BLDL 0,LIST_ADDR
*
LTR
Hi,
I am using the TAR instruction to test if a ALET has been passed to a
subroutine via AR1. The instruction I use is TAR AR1,AR1.
I run this program under TESTAUTH. After executing this instruction under
TESTAUTH I issue a LISTPSW command and get the following bit pattern under
CC column 10
97 matches
Mail list logo