Hello there,
I want to place a picture at the top on a page, and directly after that
a chapter-title (without a page break). I tried it with the key
"continue", but that does not work.
Here my try:
\setuphead
[chapter]
[continue=yes]
\starttext
\startplacefigure [title={Some picture.}, re
Am 04.06.2013 um 00:35 schrieb Joshua Krämer :
> One other problem has appeared: \startmixedcolumns[align=right] doesn't
> work (align=... works with \startcolumns). How can I change the
> alignment?
The mixedcolumns doesn’t have a option for this yet but (tolerance and blank
options are mis
One other problem has appeared: \startmixedcolumns[align=right] doesn't
work (align=... works with \startcolumns). How can I change the
alignment?
Kind regards,
Joshua
___
If your question is of interest to others
Hello ConTeXist.
Obviously I have a problem with expansion. My question is:
How can I place the elements of the list into macros for later use?
Basically, my point is that I want assign individual values into macros
within the cycle of and those subsequently used in a buffer to
creating my own
On 6/3/2013 6:38 PM, Peter Rolf wrote:
Hi,
the macro \MPfigure in meta-fig.mkiv uses \getfig... , which seems to be
undefined for mkiv.
in fact it was an alias for already a while ... should be
\getfiguredimensions[#1]% [\c!object=\v!no] already set
Hans
On Mon, 03 Jun 2013 22:04:36 +0200, Wolfgang Schuster has written:
> Mixed columns are a rewrite of the old columns mechanism.
> [...]
Thanks for the explanation, I will from now on use mixedcolumns instead
of the old column commands.
> Do you have a example because there isn’t an space between
Am 03.06.2013 um 21:45 schrieb Joshua Krämer :
> On Mon, 03 Jun 2013 21:00:49 +0200, Wolfgang Schuster has written:
>> Use mixed columns:
>>
>> \setuplayout[grid=yes]
>> \starttext \startmixedcolumns left \column right 1\\right 2
>> \stopmixedcolumns \stoptext
>
> Thank you very much, this work
On Mon, 03 Jun 2013 21:00:49 +0200, Wolfgang Schuster has written:
> Use mixed columns:
>
> \setuplayout[grid=yes]
> \starttext \startmixedcolumns left \column right 1\\right 2
> \stopmixedcolumns \stoptext
Thank you very much, this works! Now I wonder what the difference
between regular and mi
Luigi,
>> The problematic part is that section title. The chapter title formatting is
>> Ok (but thanks
>> for showing the way how to deal with these cases for future uses).
>> Applying deepnumbercommand to section didn't help to me...
> I've used align=middle instead of alternative=middle
> i
On Mon, Jun 3, 2013 at 9:12 PM, john Culleton wrote:
> Is there a way to convince Context to output a file in PDF X-3 format?
> Some of the newer presses and prepress software will accept this format
> and convert to CMYK automatically, and correctly for that particular
> press.
>
> Have you seen
Is there a way to convince Context to output a file in PDF X-3 format?
Some of the newer presses and prepress software will accept this format
and convert to CMYK automatically, and correctly for that particular
press.
Scribus will handle PDF X-3 output but seems to choke when long pdf
files are
On Mon, Jun 3, 2013 at 8:51 PM, honyk wrote:
> Dear Luigi,
>
> The problematic part is that section title. The chapter title formatting
> is Ok (but thanks for showing the way how to deal with these cases for
> future uses). Applying deepnumbercommand to section didn't help to me...
>
I've used a
Am 03.06.2013 um 20:30 schrieb Joshua Krämer :
> Hello list,
>
> in the following minimal working example (using Mark IV), the \column
> command is ignored. It works if the grid is disabled or balance=no is
> set. I need the grid, and regarding the balance: without balance, the
> columns use
Am 03.06.2013 um 20:28 schrieb luigi scarso :
> numbercommand=\groupedcommand{\cap}{\blank[0.5cm]},
>
> But again, are you sure about the \cap command ?
> It also sets the CHAPTER as small caps .
Formatting numbers as smallcaps/fake caps doesn’t make much sense :)
What I find questiona
Dear Luigi,
> > On Mon, Jun 3, 2013 at 7:08 PM, honyk wrote:
> > Dear All,
> >
> > in MkIV when any title is centered, its numeration is placed on a separate
> > line above the title itself.
> >
> > I'd expect inline formatting which could be overridden as described here
> > http://wiki.context
Hello list,
in the following minimal working example (using Mark IV), the \column
command is ignored. It works if the grid is disabled or balance=no is
set. I need the grid, and regarding the balance: without balance, the
columns use the whole type area height, but I want additional text to
ap
On Mon, Jun 3, 2013 at 8:07 PM, honyk wrote:
> Marco,
>
> thanks a lot, it gives me exactly what I wanted!
>
> But to be honest, I expected a single option for this :-)
>
>
\setuplabeltext[en][chapter=Chapter~]
% while for chapter title this line break is handy (in my use case)
\setuphead[chapte
This is great!
Thanks
> On 2013–06–03 honyk wrote:
>
> > in fresh MkIV I use the following commands for building ToC, but I
> have no
> > idea how to align the label (roman numeral) to the right.
>
> \setuphead[chapter][conversion=Romannumerals]
> \setupheadnumber[chapter][48]
>
> \setupcombi
On 2013–06–03 honyk wrote:
> in fresh MkIV I use the following commands for building ToC, but I have no
> idea how to align the label (roman numeral) to the right.
\setuphead[chapter][conversion=Romannumerals]
\setupheadnumber[chapter][48]
\setupcombinedlist
[content]
[alternative=c]
\setup
Marco,
thanks a lot, it gives me exactly what I wanted!
But to be honest, I expected a single option for this :-)
Jan
> On 2013–06–03 honyk wrote:
>
> > How can I keep numeration and title together?
>
> You can create a custom head alternative. The following code is
> copied from the source,
Sorry, I meant to write numerator. (In Dutch it is teller/noemer ;))
On 03-06-13 19:40, Sander Maijers wrote:
Hi,
How can I make the subfraction in the denominator of a fraction appear
smaller even though the nominator is very small? This gives basically
three equally long division lines:
\st
Hi,
How can I make the subfraction in the denominator of a fraction appear
smaller even though the nominator is very small? This gives basically
three equally long division lines:
\startfomula
\frac{\mu_{Z}}{\frac{\sqrt{\VAR{Z}}{\sqrt{N_{\text{segments}
\stopformula
__
On 2013–06–03 honyk wrote:
> How can I keep numeration and title together?
You can create a custom head alternative. The following code is
copied from the source, I only replace the \par with
\kern\headnumberdistance. Have a look at strc-ren.mkiv for other
layouts.
\setuphead
[section]
[alte
On Mon, Jun 3, 2013 at 7:08 PM, honyk wrote:
> Dear All,
>
> in MkIV when any title is centered, its numeration is placed on a separate
> line above the title itself.
>
> I'd expect inline formatting which could be overridden as described here
> http://wiki.contextgarden.net/Titles
>
> My code:
>
Dear All,
in fresh MkIV I use the following commands for building ToC, but I have no
idea how to align the label (roman numeral) to the right. In addition, the
specified width and distance seem to be somehow ignored so that label
interferes with the title.
\setuphead[chapter][conversion=Romannume
On 2013–06–03 Wolfgang Schuster wrote:
> > how to disable indentation inside floats without using \noindenting
> > each time?
> > […]
>
> There is no key for \setupfloat the disable the indentation because floats
> are only
> a container for other objects, e.g. figures or tables. For text objects
Dear All,
in MkIV when any title is centered, its numeration is placed on a separate
line above the title itself.
I'd expect inline formatting which could be overridden as described here
http://wiki.contextgarden.net/Titles
My code:
\setuplabeltext[en][chapter=Chapter~]
% while for chapter tit
> Sander Maijers wrote:
> >> I have a few SVG graphics of multiple megabytes. They contain a lot
> >> of objects (text/shapes). All graphics except for one gets properly
> >> included in my ConTeXt document.
>
> Marco Patzer wrote:
> > Maybe inkscape failed to convert the file. Is a corresponding
Am 03.06.2013 um 16:59 schrieb Marco Patzer :
> Hi,
>
> how to disable indentation inside floats without using \noindenting
> each time?
>
> \setupindenting [yes, medium]
> \starttext
> \input ward
>
> \startplacefigure
> foo\par bar
> \stopplacefigure
>
> \startplacefigure
> alpha\par beta
Hi,
the macro \MPfigure in meta-fig.mkiv uses \getfig... , which seems to be
undefined for mkiv.
Best wishes, Peter
___
If your question is of interest to others as well, please add an entry to the
Wiki!
maillist :
Hi,
how to disable indentation inside floats without using \noindenting
each time?
\setupindenting [yes, medium]
\starttext
\input ward
\startplacefigure
foo\par bar
\stopplacefigure
\startplacefigure
alpha\par beta
\stopplacefigure
\startplacefigure
\noindenting
a manual\par\tex{noind
Hoi Sander,
Sander Maijers wrote:
>> I have a few SVG graphics of multiple megabytes. They contain a lot
>> of objects (text/shapes). All graphics except for one gets properly
>> included in my ConTeXt document.
Marco Patzer wrote:
> Maybe inkscape failed to convert the file. Is a corresponding
>
Hi,
I'd like to have my \startlines ... \stoplines indented in the
following way: the first two lines unindented, the next two indented,
and so on. Basically, this means that I'd like the pattern to be based
on (mod 4) arithmetic and not (mod 2). Is it possible? If yes, how?
TIA,
--
Marcin B
On 2013–06–03 Sander Maijers wrote:
> I have a few SVG graphics of multiple megabytes. They contain a lot
> of objects (text/shapes). All graphics except for one gets properly
> included in my ConTeXt document. In place of the failed one there
> the gray placeholder box with 'status unknown'.
May
Hi,
I have a few SVG graphics of multiple megabytes. They contain a lot of
objects (text/shapes). All graphics except for one gets properly
included in my ConTeXt document. In place of the failed one there the
gray placeholder box with 'status unknown'.
I noticed that ConTeXt uses Inkscape t
On Sun, 2 Jun 2013 16:16:04 +0200
Wolfgang Schuster wrote:
>
> Am 02.06.2013 um 14:32 schrieb Alan Bowen :
>
> > Is there a global way to insert a very thin (ca 1pt) unbreakable space
> > before a right guillemet and after a left guillemet when the main language
> > and character spacing are
36 matches
Mail list logo
