Re: [asterisk-users] Diva server 4bri and Portuguese BRI
2006/11/1, Armin Schindler [EMAIL PROTECTED]: On Wed, 1 Nov 2006, Pedro Silva wrote: As you can see in the log below, the called number is just '0': CalledPartyNumber = 810 It seems DDI 0 of your line was called. So just do exten = 0,n,Dial... Armin Is that right! Thanks! Best regards, PS. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Diva server 4bri and Portuguese BRI
Hello, The problem was wrong contexts defined like Marco said, and is solved. Now, i have another problem...of course :) On incoming calls, i only can receive calls if i define a line like the following, in extensions.conf: exten = _.,n,Dial(SIP/500,30,tr) (all incoming calls are redirected to extension 500). The problem is that i have some DDI's assigned by my telco (xxx302500 to xxx302509) and i need to route each DDI to diferent internal extension. If i define someting like exten = _0,n,Dial... (for DDI xxx302500) the call is not answered by asterisk. I think that asterisk cannot identify the destination DDI of the incoming call...is this normal? This is the capi debug of one incoming call: asterisk1*CLI CONNECT_IND ID=001 #0x1975 LEN=0045 Controller/PLCI/NCCI= 0x401 CIPValue= 0x10 CalledPartyNumber = 810 CallingPartyNumber = 00 83X CalledPartySubaddress = default CallingPartySubaddress = default BC = 80 90 a3 LLC = default HLC = 91 81 AdditionalInfo BChannelinformation= default Keypadfacility = default Useruserdata = default Facilitydataarray = default -- CONNECT_IND (PLCI=0x401,DID=0,CID=X,CIP=0x10,CONTROLLER=0x1) ISDN1#02: msn='*' DNID='0' MSN == ISDN1#02: setting format alaw - 0x8 (alaw) == ISDN1#02: Incoming call 'X' - '0' INFO_IND ID=001 #0x1976 LEN=0017 Controller/PLCI/NCCI= 0x401 InfoNumber = 0x70 InfoElement = 810 INFO_RESP ID=001 #0x1976 LEN=0012 Controller/PLCI/NCCI= 0x401 -- ISDN1#02: info element CALLED PARTY NUMBER ISDN1#02: INFO_IND DID digits not used in this state. INFO_IND ID=001 #0x1977 LEN=0015 Controller/PLCI/NCCI= 0x401 InfoNumber = 0xa1 InfoElement = default INFO_RESP ID=001 #0x1977 LEN=0012 Controller/PLCI/NCCI= 0x401 -- ISDN1#02: info element Sending Complete CONNECT_RESP ID=001 #0x1977 LEN=0032 Controller/PLCI/NCCI= 0x401 Reject = 0x1 BProtocol B1protocol = 0x0 B2protocol = 0x0 B3protocol = 0x0 B1configuration= default B2configuration= default B3configuration= default ConnectedNumber = default ConnectedSubaddress = default LLC = default AdditionalInfo BChannelinformation= default Keypadfacility = default Useruserdata = default Facilitydataarray = default INFO_IND ID=001 #0x1978 LEN=0016 Controller/PLCI/NCCI= 0x401 InfoNumber = 0x18 InfoElement = 81 INFO_RESP ID=001 #0x1978 LEN=0012 Controller/PLCI/NCCI= 0x401 -- ISDN1#02: info element CHANNEL IDENTIFICATION 81 INFO_IND ID=001 #0x1979 LEN=0015 Controller/PLCI/NCCI= 0x401 InfoNumber = 0x8005 InfoElement = default INFO_RESP ID=001 #0x1979 LEN=0012 Controller/PLCI/NCCI= 0x401 -- ISDN1#02: info element SETUP ISDN1#02: IE SETUP / SENDING-COMPLETE already received. DISCONNECT_IND ID=001 #0x197b LEN=0014 Controller/PLCI/NCCI= 0x401 Reason = 0x0 DISCONNECT_RESP ID=001 #0x197b LEN=0012 Controller/PLCI/NCCI= 0x401 -- ISDN1#02: DISCONNECT_IND on incoming without pbx, doing hangup. CAPI/ISDN1/0-15: set channel task to 1 == ISDN1#02: CAPI Hangingup for PLCI=0x401 in state 4 == ISDN1#02: Interface cleanup PLCI=0x401 CAPI devicestate requested for ISDN1/0 Anyone can give me ideas about this problem? Thanks in advance! Best regards, PS. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Diva server 4bri and Portuguese BRI
On Wed, 1 Nov 2006, Pedro Silva wrote: Hello, The problem was wrong contexts defined like Marco said, and is solved. Now, i have another problem...of course :) On incoming calls, i only can receive calls if i define a line like the following, in extensions.conf: exten = _.,n,Dial(SIP/500,30,tr) (all incoming calls are redirected to extension 500). The problem is that i have some DDI's assigned by my telco (xxx302500 to xxx302509) and i need to route each DDI to diferent internal extension. If i define someting like exten = _0,n,Dial... (for DDI xxx302500) the call is not answered by asterisk. I think that asterisk cannot identify the destination DDI of the incoming call...is this normal? As you can see in the log below, the called number is just '0': CalledPartyNumber = 810 It seems DDI 0 of your line was called. So just do exten = 0,n,Dial... Armin This is the capi debug of one incoming call: asterisk1*CLI CONNECT_IND ID=001 #0x1975 LEN=0045 Controller/PLCI/NCCI= 0x401 CIPValue= 0x10 CalledPartyNumber = 810 CallingPartyNumber = 00 83X CalledPartySubaddress = default CallingPartySubaddress = default BC = 80 90 a3 LLC = default HLC = 91 81 AdditionalInfo BChannelinformation= default Keypadfacility = default Useruserdata = default Facilitydataarray = default -- CONNECT_IND (PLCI=0x401,DID=0,CID=X,CIP=0x10,CONTROLLER=0x1) ISDN1#02: msn='*' DNID='0' MSN == ISDN1#02: setting format alaw - 0x8 (alaw) == ISDN1#02: Incoming call 'X' - '0' INFO_IND ID=001 #0x1976 LEN=0017 Controller/PLCI/NCCI= 0x401 InfoNumber = 0x70 InfoElement = 810 INFO_RESP ID=001 #0x1976 LEN=0012 Controller/PLCI/NCCI= 0x401 -- ISDN1#02: info element CALLED PARTY NUMBER ISDN1#02: INFO_IND DID digits not used in this state. INFO_IND ID=001 #0x1977 LEN=0015 Controller/PLCI/NCCI= 0x401 InfoNumber = 0xa1 InfoElement = default INFO_RESP ID=001 #0x1977 LEN=0012 Controller/PLCI/NCCI= 0x401 -- ISDN1#02: info element Sending Complete CONNECT_RESP ID=001 #0x1977 LEN=0032 Controller/PLCI/NCCI= 0x401 Reject = 0x1 BProtocol B1protocol = 0x0 B2protocol = 0x0 B3protocol = 0x0 B1configuration= default B2configuration= default B3configuration= default ConnectedNumber = default ConnectedSubaddress = default LLC = default AdditionalInfo BChannelinformation= default Keypadfacility = default Useruserdata = default Facilitydataarray = default INFO_IND ID=001 #0x1978 LEN=0016 Controller/PLCI/NCCI= 0x401 InfoNumber = 0x18 InfoElement = 81 INFO_RESP ID=001 #0x1978 LEN=0012 Controller/PLCI/NCCI= 0x401 -- ISDN1#02: info element CHANNEL IDENTIFICATION 81 INFO_IND ID=001 #0x1979 LEN=0015 Controller/PLCI/NCCI= 0x401 InfoNumber = 0x8005 InfoElement = default INFO_RESP ID=001 #0x1979 LEN=0012 Controller/PLCI/NCCI= 0x401 -- ISDN1#02: info element SETUP ISDN1#02: IE SETUP / SENDING-COMPLETE already received. DISCONNECT_IND ID=001 #0x197b LEN=0014 Controller/PLCI/NCCI= 0x401 Reason = 0x0 DISCONNECT_RESP ID=001 #0x197b LEN=0012 Controller/PLCI/NCCI= 0x401 -- ISDN1#02: DISCONNECT_IND on incoming without pbx, doing hangup. CAPI/ISDN1/0-15: set channel task to 1 == ISDN1#02: CAPI Hangingup for PLCI=0x401 in state 4 == ISDN1#02: Interface cleanup PLCI=0x401 CAPI devicestate requested for ISDN1/0 Anyone can give me ideas about this problem? Thanks in advance! Best regards, PS. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Diva server 4bri and Portuguese BRI
On Tue, 31 Oct 2006, Pedro Silva wrote: Hello, One problem is solved and another appears... :( I cannot receive incoming calls on trixbox. I defined one incoming route (any DID/any CID) and forwading these calls to a SIP extension. With capi and sip debug in asterisk -r console i dont detect any incoming activity... Did you use set verbose 5 capi debug ? If not, you should see anything there. But if you don't see activity with this verbose level too, this call is not signaled through capi. In that case you should create traces with divactrl ditrace (or the trace wizard) to get capi activity too. Armin In xlog console i have the following debug: 0:1898:127 - SIG-R(034) 08 01 0D 05 A1 04 03 80 90 A3 18 01 81 6C 0B 00 83 39 36 33 30 34 35 37 32 33 70 02 81 30 7D 02 91 81 Q.931 CR0d SETUP Sending complete Bearer Capability 80 90 a3 Channel Id 81 Calling Party Number 00 83 '963045723' Called Party Number 81 '0' HLC 91 81 0:1898:127 - SIG-S 0-6 e:805 0:1898:130 - CREATEID ok: context:1f assigned Id:3 freeIds=ec 0:1898:130 - alloc cr in use =4 0:1898:133 - SIG-X(008) 08 01 8D 45 08 02 80 95 Q.931 CR8d DISC Cause 80 95 'Call rejected' 0:1898:133 - SIG-x(008) 08 01 8D 5A 08 02 80 D8 Q.931 CR8d REL_COM Cause 80 d8 'Incompatible destination' 0:1898:133 - SIG-S 6-0 e:8c5 0:1898:134 - D-X(012) 00 01 14 16 08 01 8D 5A 08 02 80 D8 0:1898:135 - free cr in use =3 0:1898:135 - DELETEID ok: deleted Id:4 freeIds=ec 0:1898:155 - D-R(004) 00 01 01 16 So the problem appears to be Incompatible destination... but is problem in asterisk or is before asterisk, on diva card...? Tanks by any possible help! Best regards, PS. 2006/10/29, Pedro Silva [EMAIL PROTECTED]: Finally this works!!! :) Tanks to Alberto and Marco by your help! The problems are: - the cable was connected to the wong card port... :( - the card config needs to be: ETSI; TE; Point-to-Point (I thought that was point-to-multipoint). Best regards, PS. 2006/10/29, Pedro Silva [EMAIL PROTECTED]: Hello again Alberto! Anyway, to get more info, try to open a second shell and run /usr/lib/eicon/divas/xlog then on the first shell redo the telsampl test, then post the output of xlog off the list to my address (alberto at msoft-italia.com) This is the xlog output: 4:1736:074 - CREATEID ok: context:1f assigned Id:6 freeIds=eb 4:1736:074 - alloc cr in use =4 4:1736:076 - free cr in use =3 4:1736:077 - DELETEID ok: deleted Id:6 freeIds=eb 4:1736:078 - CREATEID ok: context:1f assigned Id:6 freeIds=eb 4:1736:078 - alloc cr in use =4 4:1736:080 - free cr in use =3 4:1736:080 - DELETEID ok: deleted Id:6 freeIds=eb 4:1736:081 - CREATEID ok: context:1f assigned Id:6 freeIds=eb 4:1736:081 - alloc cr in use =4 4:1736:083 - [1,0] dsp_assign 0016, 0, 2048 4:1736:083 - [1,0] CAI[00] 16 00 00 00 00 08 4:1736:084 - [1,0] Download 532 requested 4:1736:084 - MORE 4:1736:085 - SIG-X(029) 08 01 36 05 A1 04 03 80 90 A3 18 01 83 1E 02 80 83 70 0A 80 39 36 33 30 34 35 37 32 33 Q.931 CR36 SETUP Sending complete Bearer Capability 80 90 a3 Channel Id 83 Progress Indicator 80 83 Called Party Number 80 '963045723' 4:1736:085 - SIG-S 0-1 e:885 4:1736:087 - ACTIVATION_REQ 4:1744:147 - L1_DOWN 4:1744:150 - SIG-EVENT 08 4:1744:150 - SIG-EVENT 08 4:1744:150 - EVENT: Call failed in State 'Call initiated' Link disconnected, Layer-1 error (cable or NT) 4:1744:150 - SIG-S 1-0 e: 4:1744:151 - [1,0] dsp_release 4:1744:155 - free cr in use =3 4:1744:156 - DELETEID ok: deleted Id:6 freeIds=eb I disconnect the rj45 cable from alcatel pbx and connect that to the diva card (with alcatel pbx i can make calls normally). The green led of the diva card is activated when i connect the cable. So i dont understand why the message Link disconnected, Layer-1 error (cable or NT)... This debug is th same if the cable is connected to the NT or not. Any ideas...? Thanks! PS. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Diva server 4bri and Portuguese BRI
Hi Pedro, pls post your capi.conf! I'm not used with CAPI, but should have something like: [interfaces] incomingmsn=* ; Here you match MSNs arriving from telco, for debug let it ' * ' controller=1 softdtmf=1 accountcode= context=demo ;Set this to ext-did that should be the context TRIXBOX will handle By the way, Trybox probably has an extensions_custom.conf In this file try this: [ext-did-custom] exten=_X.,1,Answer exten= _X.,n,Noop(Debugging MSNs from Telco: ${EXTEN}) exten= _X.,n,wait(1) exten= _X.,n,playback(tt-monkeys) exten=_X.,n,hangup Hope this helps. Pls give some feedback On 10/31/06, Armin Schindler [EMAIL PROTECTED] wrote: On Tue, 31 Oct 2006, Pedro Silva wrote: Hello, One problem is solved and another appears... :( I cannot receive incoming calls on trixbox. I defined one incoming route (any DID/any CID) and forwading these calls to a SIP extension. With capi and sip debug in asterisk -r console i dont detect any incoming activity... Did you use set verbose 5 capi debug ? If not, you should see anything there. But if you don't see activity with this verbose level too, this call is not signaled through capi. In that case you should create traces with divactrl ditrace (or the trace wizard) to get capi activity too. Armin In xlog console i have the following debug: 0:1898:127 - SIG-R(034) 08 01 0D 05 A1 04 03 80 90 A3 18 01 81 6C 0B 00 83 39 36 33 30 34 35 37 32 33 70 02 81 30 7D 02 91 81 Q.931 CR0d SETUP Sending complete Bearer Capability 80 90 a3 Channel Id 81 Calling Party Number 00 83 '963045723' Called Party Number 81 '0' HLC 91 81 0:1898:127 - SIG-S 0-6 e:805 0:1898:130 - CREATEID ok: context:1f assigned Id:3 freeIds=ec 0:1898:130 - alloc cr in use =4 0:1898:133 - SIG-X(008) 08 01 8D 45 08 02 80 95 Q.931 CR8d DISC Cause 80 95 'Call rejected' 0:1898:133 - SIG-x(008) 08 01 8D 5A 08 02 80 D8 Q.931 CR8d REL_COM Cause 80 d8 'Incompatible destination' 0:1898:133 - SIG-S 6-0 e:8c5 0:1898:134 - D-X(012) 00 01 14 16 08 01 8D 5A 08 02 80 D8 0:1898:135 - free cr in use =3 0:1898:135 - DELETEID ok: deleted Id:4 freeIds=ec 0:1898:155 - D-R(004) 00 01 01 16 So the problem appears to be Incompatible destination... but is problem in asterisk or is before asterisk, on diva card...? Tanks by any possible help! Best regards, PS. 2006/10/29, Pedro Silva [EMAIL PROTECTED]: Finally this works!!! :) Tanks to Alberto and Marco by your help! The problems are: - the cable was connected to the wong card port... :( - the card config needs to be: ETSI; TE; Point-to-Point (I thought that was point-to-multipoint). Best regards, PS. 2006/10/29, Pedro Silva [EMAIL PROTECTED]: Hello again Alberto! Anyway, to get more info, try to open a second shell and run /usr/lib/eicon/divas/xlog then on the first shell redo the telsampl test, then post the output of xlog off the list to my address (alberto at msoft-italia.com) This is the xlog output: 4:1736:074 - CREATEID ok: context:1f assigned Id:6 freeIds=eb 4:1736:074 - alloc cr in use =4 4:1736:076 - free cr in use =3 4:1736:077 - DELETEID ok: deleted Id:6 freeIds=eb 4:1736:078 - CREATEID ok: context:1f assigned Id:6 freeIds=eb 4:1736:078 - alloc cr in use =4 4:1736:080 - free cr in use =3 4:1736:080 - DELETEID ok: deleted Id:6 freeIds=eb 4:1736:081 - CREATEID ok: context:1f assigned Id:6 freeIds=eb 4:1736:081 - alloc cr in use =4 4:1736:083 - [1,0] dsp_assign 0016, 0, 2048 4:1736:083 - [1,0] CAI[00] 16 00 00 00 00 08 4:1736:084 - [1,0] Download 532 requested 4:1736:084 - MORE 4:1736:085 - SIG-X(029) 08 01 36 05 A1 04 03 80 90 A3 18 01 83 1E 02 80 83 70 0A 80 39 36 33 30 34 35 37 32 33 Q.931 CR36 SETUP Sending complete Bearer Capability 80 90 a3 Channel Id 83 Progress Indicator 80 83 Called Party Number 80 '963045723' 4:1736:085 - SIG-S 0-1 e:885 4:1736:087 - ACTIVATION_REQ 4:1744:147 - L1_DOWN 4:1744:150 - SIG-EVENT 08 4:1744:150 - SIG-EVENT 08 4:1744:150 - EVENT: Call failed in State 'Call initiated' Link disconnected, Layer-1 error (cable or NT) 4:1744:150 - SIG-S 1-0 e: 4:1744:151 - [1,0] dsp_release 4:1744:155 - free cr in use =3 4:1744:156 - DELETEID ok: deleted Id:6 freeIds=eb I disconnect the rj45 cable from alcatel pbx and connect that to the diva card (with alcatel pbx i can make calls normally). The green led of the diva card is activated when i connect the cable. So i dont understand why the message Link disconnected, Layer-1 error (cable or NT)... This debug is th same if the cable is connected to the NT or not. Any ideas...? Thanks! PS. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit:
Re: [asterisk-users] Diva server 4bri and Portuguese BRI
Hello, One problem is solved and another appears... :( I cannot receive incoming calls on trixbox. I defined one incoming route (any DID/any CID) and forwading these calls to a SIP extension. With capi and sip debug in asterisk -r console i dont detect any incoming activity... In xlog console i have the following debug: 0:1898:127 - SIG-R(034) 08 01 0D 05 A1 04 03 80 90 A3 18 01 81 6C 0B 00 83 39 36 33 30 34 35 37 32 33 70 02 81 30 7D 02 91 81 Q.931 CR0d SETUP Sending complete Bearer Capability 80 90 a3 Channel Id 81 Calling Party Number 00 83 '963045723' Called Party Number 81 '0' HLC 91 81 0:1898:127 - SIG-S 0-6 e:805 0:1898:130 - CREATEID ok: context:1f assigned Id:3 freeIds=ec 0:1898:130 - alloc cr in use =4 0:1898:133 - SIG-X(008) 08 01 8D 45 08 02 80 95 Q.931 CR8d DISC Cause 80 95 'Call rejected' 0:1898:133 - SIG-x(008) 08 01 8D 5A 08 02 80 D8 Q.931 CR8d REL_COM Cause 80 d8 'Incompatible destination' 0:1898:133 - SIG-S 6-0 e:8c5 0:1898:134 - D-X(012) 00 01 14 16 08 01 8D 5A 08 02 80 D8 0:1898:135 - free cr in use =3 0:1898:135 - DELETEID ok: deleted Id:4 freeIds=ec 0:1898:155 - D-R(004) 00 01 01 16 So the problem appears to be Incompatible destination... but is problem in asterisk or is before asterisk, on diva card...? Tanks by any possible help! Best regards, PS. 2006/10/29, Pedro Silva [EMAIL PROTECTED]: Finally this works!!! :) Tanks to Alberto and Marco by your help! The problems are: - the cable was connected to the wong card port... :( - the card config needs to be: ETSI; TE; Point-to-Point (I thought that was point-to-multipoint). Best regards, PS. 2006/10/29, Pedro Silva [EMAIL PROTECTED]: Hello again Alberto! Anyway, to get more info, try to open a second shell and run /usr/lib/eicon/divas/xlog then on the first shell redo the telsampl test, then post the output of xlog off the list to my address (alberto at msoft-italia.com) This is the xlog output: 4:1736:074 - CREATEID ok: context:1f assigned Id:6 freeIds=eb 4:1736:074 - alloc cr in use =4 4:1736:076 - free cr in use =3 4:1736:077 - DELETEID ok: deleted Id:6 freeIds=eb 4:1736:078 - CREATEID ok: context:1f assigned Id:6 freeIds=eb 4:1736:078 - alloc cr in use =4 4:1736:080 - free cr in use =3 4:1736:080 - DELETEID ok: deleted Id:6 freeIds=eb 4:1736:081 - CREATEID ok: context:1f assigned Id:6 freeIds=eb 4:1736:081 - alloc cr in use =4 4:1736:083 - [1,0] dsp_assign 0016, 0, 2048 4:1736:083 - [1,0] CAI[00] 16 00 00 00 00 08 4:1736:084 - [1,0] Download 532 requested 4:1736:084 - MORE 4:1736:085 - SIG-X(029) 08 01 36 05 A1 04 03 80 90 A3 18 01 83 1E 02 80 83 70 0A 80 39 36 33 30 34 35 37 32 33 Q.931 CR36 SETUP Sending complete Bearer Capability 80 90 a3 Channel Id 83 Progress Indicator 80 83 Called Party Number 80 '963045723' 4:1736:085 - SIG-S 0-1 e:885 4:1736:087 - ACTIVATION_REQ 4:1744:147 - L1_DOWN 4:1744:150 - SIG-EVENT 08 4:1744:150 - SIG-EVENT 08 4:1744:150 - EVENT: Call failed in State 'Call initiated' Link disconnected, Layer-1 error (cable or NT) 4:1744:150 - SIG-S 1-0 e: 4:1744:151 - [1,0] dsp_release 4:1744:155 - free cr in use =3 4:1744:156 - DELETEID ok: deleted Id:6 freeIds=eb I disconnect the rj45 cable from alcatel pbx and connect that to the diva card (with alcatel pbx i can make calls normally). The green led of the diva card is activated when i connect the cable. So i dont understand why the message Link disconnected, Layer-1 error (cable or NT)... This debug is th same if the cable is connected to the NT or not. Any ideas...? Thanks! PS. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Diva server 4bri and Portuguese BRI
Pedro Silva ha scritto: Hello, I need to connect one diva server 4bri to a portuguese BRI interface. The operator (PT) said that this bri is in point-to-multipoint mode (S0). Previously one PBX has connected to that interface. The asterisk and diva drivers are working ok but i cannot communicate to outside via this bri. Xlite gives me the message: call failed: declined. Anyone have experience with this setup? What are the main parameters for bri card configuration? D-channel protocol: ETSI-DSS1 or other? Interface mode: NT or TE? Direct Inward Dialing (DID): Yes ou no? (MSN ou DID?) Thanks by any kind of help! Best regards, PS. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users I'm not sure about Portuguese operators standard, but I bet ETSI-DSS1 should work just fine. The interface mode is surely TE. The DID/MSN should not affect outgoing calls, I generally leave DID off unless the telco company has that service active. If you're using the diva server for linux package from eicon (divas4linux, currently rel. 8.2), you should find a very simple utility named telsampl under /usr/lib/eicon/divas which you can run besides asterisk, to test outgoing calls. You should run it with this command line: telsampl -c x where x is the bri port you wish to test (1..4) then at the prompt type c and enter a pstn number, e.g. your mobile phone, then you can watch the log onscreen. If the outgoing call works, then your isdn setup is correct, and the problem is in asterisk. The message from xlite is not meaningful, as it could occur on many situations. You should watch the debug output on asterisk console. That helped me a lot. Alberto. -- -- Alberto Pastore B-Press Srl - Gruppo MSoft P.IVA 01697420030 P.le Lombardia, 4 - 28100 Novara - Italy Tel. 0321-499508 Fax 0321-492974 http://www.msoft.it ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Diva server 4bri and Portuguese BRI
Thanks Alberto! I tested with telsampl like you said (with various configurations for de diva) and this not works...:( The trace is: Enter destination address: 273xx --Conn_Req(273xx) Connect_Con-- [29]:Disc_Ind-- --Disc_Res **Call cleared*** Any idea for the possible problem? Thanks and best regards, PS. 2006/10/29, Alberto Pastore [EMAIL PROTECTED]: Pedro Silva ha scritto: Hello, I need to connect one diva server 4bri to a portuguese BRI interface. The operator (PT) said that this bri is in point-to-multipoint mode (S0). Previously one PBX has connected to that interface. The asterisk and diva drivers are working ok but i cannot communicate to outside via this bri. Xlite gives me the message: call failed: declined. Anyone have experience with this setup? What are the main parameters for bri card configuration? D-channel protocol: ETSI-DSS1 or other? Interface mode: NT or TE? Direct Inward Dialing (DID): Yes ou no? (MSN ou DID?) Thanks by any kind of help! Best regards, PS. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users I'm not sure about Portuguese operators standard, but I bet ETSI-DSS1 should work just fine. The interface mode is surely TE. The DID/MSN should not affect outgoing calls, I generally leave DID off unless the telco company has that service active. If you're using the diva server for linux package from eicon (divas4linux, currently rel. 8.2), you should find a very simple utility named telsampl under /usr/lib/eicon/divas which you can run besides asterisk, to test outgoing calls. You should run it with this command line: telsampl -c x where x is the bri port you wish to test (1..4) then at the prompt type c and enter a pstn number, e.g. your mobile phone, then you can watch the log onscreen. If the outgoing call works, then your isdn setup is correct, and the problem is in asterisk. The message from xlite is not meaningful, as it could occur on many situations. You should watch the debug output on asterisk console. That helped me a lot. Alberto. -- -- Alberto Pastore B-Press Srl - Gruppo MSoft P.IVA 01697420030 P.le Lombardia, 4 - 28100 Novara - Italy Tel. 0321-499508 Fax 0321-492974 http://www.msoft.it ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Diva server 4bri and Portuguese BRI
pls post your misdn.conf as well as extensions.confMay be i can help.Sou Português:)On 10/29/06, Pedro Silva [EMAIL PROTECTED] wrote:Thanks Alberto!I tested with telsampl like you said (with various configurations for de diva) and this not works...:(The trace is:Enter destination address: 273xx--Conn_Req(273xx)Connect_Con--[29]:Disc_IndDisc_Res**Call cleared*** Any idea for the possible problem?Thanks and best regards,PS.2006/10/29, Alberto Pastore [EMAIL PROTECTED]: Pedro Silva ha scritto: Hello, I need to connect one diva server 4bri to a portuguese BRI interface. The operator (PT) said that this bri is in point-to-multipoint mode (S0). Previously one PBX has connected to that interface. The asterisk and diva drivers are working ok but i cannot communicate to outside via this bri. Xlite gives me the message: call failed: declined. Anyone have experience with this setup? What are the main parameters for bri card configuration? D-channel protocol: ETSI-DSS1 or other? Interface mode: NT or TE? Direct Inward Dialing (DID): Yes ou no? (MSN ou DID?) Thanks by any kind of help! Best regards, PS. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users I'm not sure about Portuguese operators standard, but I bet ETSI-DSS1 should work just fine. The interface mode is surely TE. The DID/MSN should not affect outgoing calls, I generally leave DID off unless the telco company has that service active. If you're using the diva server for linux package from eicon (divas4linux, currently rel. 8.2), you should find a very simple utility named telsampl under /usr/lib/eicon/divas which you can run besides asterisk, to test outgoing calls. You should run it with this command line: telsampl -c x where x is the bri port you wish to test (1..4) then at the prompt type c and enter a pstn number, e.g. your mobile phone, then you can watch the log onscreen. If the outgoing call works, then your isdn setup is correct, and the problem is in asterisk. The message from xlite is not meaningful, as it could occur on many situations. You should watch the debug output on asterisk console. That helped me a lot. Alberto. -- -- Alberto Pastore B-Press Srl - Gruppo MSoft P.IVA 01697420030 P.le Lombardia, 4 - 28100 Novara - Italy Tel. 0321-499508 Fax 0321-492974 http://www.msoft.it ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users___--Bandwidth and Colocation provided by Easynews.com --asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Com os melhores cumprimentos,Marco Mouta ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Diva server 4bri and Portuguese BRI
Marco Mouta ha scritto: pls post your misdn.conf as well as extensions.conf May be i can help. Sou Português:) On 10/29/06, *Pedro Silva* [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] wrote: Thanks Alberto! I tested with telsampl like you said (with various configurations for de diva) and this not works...:( The trace is: Enter destination address: 273xx --Conn_Req(273xx) Connect_Con-- [29]:Disc_Ind-- --Disc_Res **Call cleared*** Any idea for the possible problem? Thanks and best regards, PS. I think Pedro is not using mISDN, he's using chan_capi, but his problem arises before asterisk is involved. Anyway, to get more info, try to open a second shell and run /usr/lib/eicon/divas/xlog then on the first shell redo the telsampl test, then post the output of xlog off the list to my address (alberto at msoft-italia.com) ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Diva server 4bri and Portuguese BRI
Olá Marco! :) 2006/10/29, Marco Mouta [EMAIL PROTECTED]: pls post your misdn.conf as well as extensions.conf The asterisk version that i used with trixbox dont't have misdn.conf... I used capi.conf. For now, i dont care about asterisk, because with the divas utility telsampl i know that the problem is between diva card and BRI access. So i need to solve first this problem and only after that im care with asterisk... :) Obrigado desde já pela disponibilidade de ajuda! PS. May be i can help. Sou Português:) On 10/29/06, Pedro Silva [EMAIL PROTECTED] wrote: Thanks Alberto! I tested with telsampl like you said (with various configurations for de diva) and this not works...:( The trace is: Enter destination address: 273xx --Conn_Req(273xx) Connect_Con-- [29]:Disc_Ind-- --Disc_Res **Call cleared*** Any idea for the possible problem? Thanks and best regards, PS. 2006/10/29, Alberto Pastore [EMAIL PROTECTED]: Pedro Silva ha scritto: Hello, I need to connect one diva server 4bri to a portuguese BRI interface. The operator (PT) said that this bri is in point-to-multipoint mode (S0). Previously one PBX has connected to that interface. The asterisk and diva drivers are working ok but i cannot communicate to outside via this bri. Xlite gives me the message: call failed: declined. Anyone have experience with this setup? What are the main parameters for bri card configuration? D-channel protocol: ETSI-DSS1 or other? Interface mode: NT or TE? Direct Inward Dialing (DID): Yes ou no? (MSN ou DID?) Thanks by any kind of help! Best regards, PS. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users I'm not sure about Portuguese operators standard, but I bet ETSI-DSS1 should work just fine. The interface mode is surely TE. The DID/MSN should not affect outgoing calls, I generally leave DID off unless the telco company has that service active. If you're using the diva server for linux package from eicon (divas4linux, currently rel. 8.2), you should find a very simple utility named telsampl under /usr/lib/eicon/divas which you can run besides asterisk, to test outgoing calls. You should run it with this command line: telsampl -c x where x is the bri port you wish to test (1..4) then at the prompt type c and enter a pstn number, e.g. your mobile phone, then you can watch the log onscreen. If the outgoing call works, then your isdn setup is correct, and the problem is in asterisk. The message from xlite is not meaningful, as it could occur on many situations. You should watch the debug output on asterisk console. That helped me a lot. Alberto. -- -- Alberto Pastore B-Press Srl - Gruppo MSoft P.IVA 01697420030 P.le Lombardia, 4 - 28100 Novara - Italy Tel. 0321-499508 Fax 0321-492974 http://www.msoft.it ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- Com os melhores cumprimentos, Marco Mouta ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Diva server 4bri and Portuguese BRI
Hello again Alberto! Anyway, to get more info, try to open a second shell and run /usr/lib/eicon/divas/xlog then on the first shell redo the telsampl test, then post the output of xlog off the list to my address (alberto at msoft-italia.com) This is the xlog output: 4:1736:074 - CREATEID ok: context:1f assigned Id:6 freeIds=eb 4:1736:074 - alloc cr in use =4 4:1736:076 - free cr in use =3 4:1736:077 - DELETEID ok: deleted Id:6 freeIds=eb 4:1736:078 - CREATEID ok: context:1f assigned Id:6 freeIds=eb 4:1736:078 - alloc cr in use =4 4:1736:080 - free cr in use =3 4:1736:080 - DELETEID ok: deleted Id:6 freeIds=eb 4:1736:081 - CREATEID ok: context:1f assigned Id:6 freeIds=eb 4:1736:081 - alloc cr in use =4 4:1736:083 - [1,0] dsp_assign 0016, 0, 2048 4:1736:083 - [1,0] CAI[00] 16 00 00 00 00 08 4:1736:084 - [1,0] Download 532 requested 4:1736:084 - MORE 4:1736:085 - SIG-X(029) 08 01 36 05 A1 04 03 80 90 A3 18 01 83 1E 02 80 83 70 0A 80 39 36 33 30 34 35 37 32 33 Q.931 CR36 SETUP Sending complete Bearer Capability 80 90 a3 Channel Id 83 Progress Indicator 80 83 Called Party Number 80 '963045723' 4:1736:085 - SIG-S 0-1 e:885 4:1736:087 - ACTIVATION_REQ 4:1744:147 - L1_DOWN 4:1744:150 - SIG-EVENT 08 4:1744:150 - SIG-EVENT 08 4:1744:150 - EVENT: Call failed in State 'Call initiated' Link disconnected, Layer-1 error (cable or NT) 4:1744:150 - SIG-S 1-0 e: 4:1744:151 - [1,0] dsp_release 4:1744:155 - free cr in use =3 4:1744:156 - DELETEID ok: deleted Id:6 freeIds=eb I disconnect the rj45 cable from alcatel pbx and connect that to the diva card (with alcatel pbx i can make calls normally). The green led of the diva card is activated when i connect the cable. So i dont understand why the message Link disconnected, Layer-1 error (cable or NT)... This debug is th same if the cable is connected to the NT or not. Any ideas...? Thanks! PS. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Diva server 4bri and Portuguese BRI
Finally this works!!! :) Tanks to Alberto and Marco by your help! The problems are: - the cable was connected to the wong card port... :( - the card config needs to be: ETSI; TE; Point-to-Point (I thought that was point-to-multipoint). Best regards, PS. 2006/10/29, Pedro Silva [EMAIL PROTECTED]: Hello again Alberto! Anyway, to get more info, try to open a second shell and run /usr/lib/eicon/divas/xlog then on the first shell redo the telsampl test, then post the output of xlog off the list to my address (alberto at msoft-italia.com) This is the xlog output: 4:1736:074 - CREATEID ok: context:1f assigned Id:6 freeIds=eb 4:1736:074 - alloc cr in use =4 4:1736:076 - free cr in use =3 4:1736:077 - DELETEID ok: deleted Id:6 freeIds=eb 4:1736:078 - CREATEID ok: context:1f assigned Id:6 freeIds=eb 4:1736:078 - alloc cr in use =4 4:1736:080 - free cr in use =3 4:1736:080 - DELETEID ok: deleted Id:6 freeIds=eb 4:1736:081 - CREATEID ok: context:1f assigned Id:6 freeIds=eb 4:1736:081 - alloc cr in use =4 4:1736:083 - [1,0] dsp_assign 0016, 0, 2048 4:1736:083 - [1,0] CAI[00] 16 00 00 00 00 08 4:1736:084 - [1,0] Download 532 requested 4:1736:084 - MORE 4:1736:085 - SIG-X(029) 08 01 36 05 A1 04 03 80 90 A3 18 01 83 1E 02 80 83 70 0A 80 39 36 33 30 34 35 37 32 33 Q.931 CR36 SETUP Sending complete Bearer Capability 80 90 a3 Channel Id 83 Progress Indicator 80 83 Called Party Number 80 '963045723' 4:1736:085 - SIG-S 0-1 e:885 4:1736:087 - ACTIVATION_REQ 4:1744:147 - L1_DOWN 4:1744:150 - SIG-EVENT 08 4:1744:150 - SIG-EVENT 08 4:1744:150 - EVENT: Call failed in State 'Call initiated' Link disconnected, Layer-1 error (cable or NT) 4:1744:150 - SIG-S 1-0 e: 4:1744:151 - [1,0] dsp_release 4:1744:155 - free cr in use =3 4:1744:156 - DELETEID ok: deleted Id:6 freeIds=eb I disconnect the rj45 cable from alcatel pbx and connect that to the diva card (with alcatel pbx i can make calls normally). The green led of the diva card is activated when i connect the cable. So i dont understand why the message Link disconnected, Layer-1 error (cable or NT)... This debug is th same if the cable is connected to the NT or not. Any ideas...? Thanks! PS. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users