Re: [beagleboard] JTAG Debugging - 2 Code Composers on the Same Machine - One under Ubuntu - The Other under Windows

2017-08-09 Thread Jeff Andich 
Thank you!

Yes, I would think symbols would need to be included to break on functions, 
but I believe the video I watched (TI board port series modules 6,7) 
specified to load the bin file after switching CCS into debug mode.. When I 
get a native linux machine setup, I'll be able to report back. Going to try 
that tomorrow, but then there's that corporate network thing...


On Wednesday, August 9, 2017 at 4:22:24 PM UTC-5, lazarman wrote:

> Don't you want to load the output generated with debug info not the .bin? 
> I've used a lauterbach emulator to load uboot for source level debugging. 
> You need to point to source tree where you built uboot. If I recall 
> correctly we used a dual boot Ubuntu machine at work. We built in Ubuntu 
> and used CCS in windows and had a mount to a shared partition. At that time 
> uboot debugging was possible in linux but I believe we had the linux 
> drivers for the jtag from either TI or Lauterbach. I think using a virtual 
> machine your gonna have issues
>
> Sent from Yahoo Mail on Android 
> 
>
> On Wed, Aug 9, 2017 at 8:23 AM, Jeff Andich
> > wrote:
> Hi,
>
> We're not yet able to setup Ubuntu native on PC's at work, so we're using 
> Ubuntu under VBOX.
>
> I'm attempting to do JTAG debugging via CCS 7.2 to the BB-X15/am572xEVM, 
> but when I run CCS in debug mode under an Ubuntu/VirtualBox, CCS hangs. 
>  I'm able to view registers on the A15_0 core, but I haven't been able to 
> successfully load u-boot-spl.bin built in CCS on Ubuntu.  When I load, CCS 
> never comes back, and I haven't been able to specify the "load address" for 
> the SPL.  From what I understand from reading an older version of TI's CCS 
> wiki, JTAG debugging doesn't work well through a virtual machine.
>
> So I'm trying a strange approach:  2, CCS 7.2 installations on the same 
> machine, 1 under the Ubuntu VM to build the SPL in Linux and another under 
> Windows to manage the JTAG debugging process (e.g. load u-boot-spl.bin via 
> JTAG, view memory, step, etc).  But I'm having some issues using a 
> Windows/VBOX shared folder to contain the u-boot tree so that both the 
> Windows and Ubuntu CCS's can look at the same tree/project.
>
> Has anyone on this forum successfully tried this kind of thing before or 
> are there obvious reasons why this is a bad idea??  
>
> I think the person in the following thread may have tried something like 
> this??
>
>
> https://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/117880?tisearch=e2e-quicksearch&keymatch=virtualbox%20shared%20folder
>
> I may post up on TI/E2E, but we're working with the BB-X15 image, not the 
> TI SDK image.  I'll try to annotate this thread with any useful information 
> that's thrown our way.
>
> Thanks!!
>
> Jeff
>
> -- 
> For more options, visit http://beagleboard.org/discuss
> --- 
> You received this message because you are subscribed to the Google Groups 
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an 
> email to beagleboard...@googlegroups.com .
> To view this discussion on the web visit 
> https://groups.google.com/d/msgid/beagleboard/5f061151-4d0a-4633-b601-767a32a9c47b%40googlegroups.com
>  
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/aba9cd4a-6def-4b6e-9b97-7fa28ff6cd1c%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] JTAG Debugging - 2 Code Composers on the Same Machine - One under Ubuntu - The Other under Windows

2017-08-09 Thread 'Mark Lazarewicz' via BeagleBoard 
Don't you want to load the output generated with debug info not the .bin? I've 
used a lauterbach emulator to load uboot for source level debugging. You need 
to point to source tree where you built uboot. If I recall correctly we used a 
dual boot Ubuntu machine at work. We built in Ubuntu and used CCS in windows 
and had a mount to a shared partition. At that time uboot debugging was 
possible in linux but I believe we had the linux drivers for the jtag from 
either TI or Lauterbach. I think using a virtual machine your gonna have issues

Sent from Yahoo Mail on Android 
 
  On Wed, Aug 9, 2017 at 8:23 AM, Jeff Andich wrote:   
Hi,
We're not yet able to setup Ubuntu native on PC's at work, so we're using 
Ubuntu under VBOX.
I'm attempting to do JTAG debugging via CCS 7.2 to the BB-X15/am572xEVM, but 
when I run CCS in debug mode under an Ubuntu/VirtualBox, CCS hangs.  I'm able 
to view registers on the A15_0 core, but I haven't been able to successfully 
load u-boot-spl.bin built in CCS on Ubuntu.  When I load, CCS never comes back, 
and I haven't been able to specify the "load address" for the SPL.  From what I 
understand from reading an older version of TI's CCS wiki, JTAG debugging 
doesn't work well through a virtual machine.
So I'm trying a strange approach:  2, CCS 7.2 installations on the same 
machine, 1 under the Ubuntu VM to build the SPL in Linux and another under 
Windows to manage the JTAG debugging process (e.g. load u-boot-spl.bin via 
JTAG, view memory, step, etc).  But I'm having some issues using a Windows/VBOX 
shared folder to contain the u-boot tree so that both the Windows and Ubuntu 
CCS's can look at the same tree/project.
Has anyone on this forum successfully tried this kind of thing before or are 
there obvious reasons why this is a bad idea??  
I think the person in the following thread may have tried something like this??
https://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/117880?tisearch=e2e-quicksearch&keymatch=virtualbox%20shared%20folder

I may post up on TI/E2E, but we're working with the BB-X15 image, not the TI 
SDK image.  I'll try to annotate this thread with any useful information that's 
thrown our way.
Thanks!!
Jeff

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/5f061151-4d0a-4633-b601-767a32a9c47b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
  

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/1437773405.855330.1502313487742%40mail.yahoo.com.
For more options, visit https://groups.google.com/d/optout.

Re: [beagleboard] JTAG Debugging - 2 Code Composers on the Same Machine - One under Ubuntu - The Other under Windows

2017-08-09 Thread William Hermans 
If you're serious about your work. Buy a cheap laptop, and install Ubuntu
on it.

On Wed, Aug 9, 2017 at 6:23 AM, Jeff Andich  wrote:

> Hi,
>
> We're not yet able to setup Ubuntu native on PC's at work, so we're using
> Ubuntu under VBOX.
>
> I'm attempting to do JTAG debugging via CCS 7.2 to the BB-X15/am572xEVM,
> but when I run CCS in debug mode under an Ubuntu/VirtualBox, CCS hangs.
> I'm able to view registers on the A15_0 core, but I haven't been able to
> successfully load u-boot-spl.bin built in CCS on Ubuntu.  When I load, CCS
> never comes back, and I haven't been able to specify the "load address" for
> the SPL.  From what I understand from reading an older version of TI's CCS
> wiki, JTAG debugging doesn't work well through a virtual machine.
>
> So I'm trying a strange approach:  2, CCS 7.2 installations on the same
> machine, 1 under the Ubuntu VM to build the SPL in Linux and another under
> Windows to manage the JTAG debugging process (e.g. load u-boot-spl.bin via
> JTAG, view memory, step, etc).  But I'm having some issues using a
> Windows/VBOX shared folder to contain the u-boot tree so that both the
> Windows and Ubuntu CCS's can look at the same tree/project.
>
> Has anyone on this forum successfully tried this kind of thing before or
> are there obvious reasons why this is a bad idea??
>
> I think the person in the following thread may have tried something like
> this??
>
> https://e2e.ti.com/support/development_tools/code_
> composer_studio/f/81/t/117880?tisearch=e2e-quicksearch&
> keymatch=virtualbox%20shared%20folder
>
> I may post up on TI/E2E, but we're working with the BB-X15 image, not the
> TI SDK image.  I'll try to annotate this thread with any useful information
> that's thrown our way.
>
> Thanks!!
>
> Jeff
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to beagleboard+unsubscr...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/
> msgid/beagleboard/5f061151-4d0a-4633-b601-767a32a9c47b%40googlegroups.com
> 
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CALHSORpdoi4VaLaJq1-QwU3GkyND-B%3Drr3qWy3yy%2Bz-fmqH4ZA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

[beagleboard] JTAG Debugging - 2 Code Composers on the Same Machine - One under Ubuntu - The Other under Windows

2017-08-09 Thread Jeff Andich 
Hi,

We're not yet able to setup Ubuntu native on PC's at work, so we're using 
Ubuntu under VBOX.

I'm attempting to do JTAG debugging via CCS 7.2 to the BB-X15/am572xEVM, 
but when I run CCS in debug mode under an Ubuntu/VirtualBox, CCS hangs. 
 I'm able to view registers on the A15_0 core, but I haven't been able to 
successfully load u-boot-spl.bin built in CCS on Ubuntu.  When I load, CCS 
never comes back, and I haven't been able to specify the "load address" for 
the SPL.  From what I understand from reading an older version of TI's CCS 
wiki, JTAG debugging doesn't work well through a virtual machine.

So I'm trying a strange approach:  2, CCS 7.2 installations on the same 
machine, 1 under the Ubuntu VM to build the SPL in Linux and another under 
Windows to manage the JTAG debugging process (e.g. load u-boot-spl.bin via 
JTAG, view memory, step, etc).  But I'm having some issues using a 
Windows/VBOX shared folder to contain the u-boot tree so that both the 
Windows and Ubuntu CCS's can look at the same tree/project.

Has anyone on this forum successfully tried this kind of thing before or 
are there obvious reasons why this is a bad idea??  

I think the person in the following thread may have tried something like 
this??

https://e2e.ti.com/support/development_tools/code_composer_studio/f/81/t/117880?tisearch=e2e-quicksearch&keymatch=virtualbox%20shared%20folder

I may post up on TI/E2E, but we're working with the BB-X15 image, not the 
TI SDK image.  I'll try to annotate this thread with any useful information 
that's thrown our way.

Thanks!!

Jeff

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/5f061151-4d0a-4633-b601-767a32a9c47b%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.