If you're serious about your work. Buy a cheap laptop, and install Ubuntu
on it.

On Wed, Aug 9, 2017 at 6:23 AM, Jeff Andich <jeff.and...@gmail.com> wrote:

> Hi,
>
> We're not yet able to setup Ubuntu native on PC's at work, so we're using
> Ubuntu under VBOX.
>
> I'm attempting to do JTAG debugging via CCS 7.2 to the BB-X15/am572xEVM,
> but when I run CCS in debug mode under an Ubuntu/VirtualBox, CCS hangs.
> I'm able to view registers on the A15_0 core, but I haven't been able to
> successfully load u-boot-spl.bin built in CCS on Ubuntu.  When I load, CCS
> never comes back, and I haven't been able to specify the "load address" for
> the SPL.  From what I understand from reading an older version of TI's CCS
> wiki, JTAG debugging doesn't work well through a virtual machine.
>
> So I'm trying a strange approach:  2, CCS 7.2 installations on the same
> machine, 1 under the Ubuntu VM to build the SPL in Linux and another under
> Windows to manage the JTAG debugging process (e.g. load u-boot-spl.bin via
> JTAG, view memory, step, etc).  But I'm having some issues using a
> Windows/VBOX shared folder to contain the u-boot tree so that both the
> Windows and Ubuntu CCS's can look at the same tree/project.
>
> Has anyone on this forum successfully tried this kind of thing before or
> are there obvious reasons why this is a bad idea??
>
> I think the person in the following thread may have tried something like
> this??
>
> https://e2e.ti.com/support/development_tools/code_
> composer_studio/f/81/t/117880?tisearch=e2e-quicksearch&
> keymatch=virtualbox%20shared%20folder
>
> I may post up on TI/E2E, but we're working with the BB-X15 image, not the
> TI SDK image.  I'll try to annotate this thread with any useful information
> that's thrown our way.
>
> Thanks!!
>
> Jeff
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to beagleboard+unsubscr...@googlegroups.com.
> To view this discussion on the web visit https://groups.google.com/d/
> msgid/beagleboard/5f061151-4d0a-4633-b601-767a32a9c47b%40googlegroups.com
> <https://groups.google.com/d/msgid/beagleboard/5f061151-4d0a-4633-b601-767a32a9c47b%40googlegroups.com?utm_medium=email&utm_source=footer>
> .
> For more options, visit https://groups.google.com/d/optout.
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to beagleboard+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/CALHSORpdoi4VaLaJq1-QwU3GkyND-B%3Drr3qWy3yy%2Bz-fmqH4ZA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to