Stus-List Re: Gelcoat colour matching

2021-05-26 Thread Gerald Fennessey via CnC-List 
I have 85 MK3 used these people for gelcoatthey know all C colors, my deck 
was smoke gray was not cheap but perfect match.
MINI-CRAFT OF FL INC.900 INDUSTRIAL DRWILDWOOD FL 34785 
352/748-5200352/748-5338 FAX 
-Original Message-
From: Doug Mountjoy via CnC-List 
To: Stus-List 
Cc: Doug Mountjoy 
Sent: Sun, May 23, 2021 6:10 pm
Subject: Stus-List Re: Gelcoat colour matching

Thats what I was told by Fiberlay the local fiberglass supplier, and the 
"expert" I talked to prior to buying supplies to build my holding tank. But 
then he told me I needed 5 gallons of polyester resin, I used 1. 


Sent from my T-Mobile 4G LTE Device
Doug MountjoyPort Orchard YCPort Orchard,  WARebecca Leah1988 LF39 

 Original message From: dwight veinot via CnC-List 
 Date: 5/23/21 12:33 PM (GMT-08:00) To: Stus-List 
 Cc: dwight veinot  Subject: 
Stus-List Re: Gelcoat colour matching 
Are you totally sure about that
On Sun, May 23, 2021 at 12:55 PM Doug Mountjoy via CnC-List 
 wrote:

Be advised, Gel coat is Polyester based and will not adhere to epoxy, but epoxy 
will adhere to polyester and or vinyl ester based fiberglass. Gel coat will 
also work with vinyl ester based fiberglass. 

Doug

On Sun, May 23, 2021 at 8:17 AM Graham Collins via CnC-List 
 wrote:

  Hi Adam Burnside Fiberglass loaned me the color cards to compare to my 
gelcoat, for best results you might want to ask them if they still do that.  I 
can tell you what my can of gelcoat is marked (or you could try some if you 
want, it isn't like I'll use it all...).  I'm at AYC, where are you located?
  Graham Collins
Secret Plans
C 35-III #11 On 2021-05-23 10:23 a.m., Adam Hayden via CnC-List wrote:
  
  Hello  
   I am sure this has been asked before.  Has anyone produced the colour charts 
for gelcoat repair?  I replaced a number of stanchion bases and now have some 
holes to repair. (I have the epoxy etc just looking for the final topcoat to 
match the rest of the deck)  Our decks are that slightly off-white light beige 
colour.  
   I am in Nova Scotia so may try Burnside Fibreglass.  
   Thanks  
   Adam  C 36  State of Bliss  
  Sent from my Bell Samsung device over Canada’s largest network. 
  Thanks to all of the subscribers that contributed to the list to help with 
the costs involved.  If you want to show your support to the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu 
 Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu


-- 
Douglas Mountjoy
253-208-1412
Port Orchard YC, WA
Rebecca Leah
C LandFall 39
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
-- 
Sent from Gmail MobileThanks to all of the subscribers that contributed to the 
list to help with the costs involved.  If you want to show your support to the 
list - use PayPal to send contribution --  https://www.paypal.me/stumurray  
Thanks - StuThanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Gelcoat colour matching

2021-05-24 Thread WILLIAM WALKER via CnC-List 
 Yes,   I got color strips from home depot, found a good match and took kiwis 
grip there.  They tinted for free.     Color match was excellent and holding up 
well after about 7 years.  Thinking of recoating this summer, but wearing very 
well.Bill Walker Evening StarCnC 36Pentwater, Mi  
On Monday, May 24, 2021, 04:33:56 PM EDT, Robert Mazza via CnC-List 
 wrote:  
 
 On a ralated subject, has anyone tintedwhite Kiwi Grip to better match  the 
off- white gelcoat surrounding it?
Rob 
On Sun, May 23, 2021, 11:12 AM Dave S via CnC-List,  
wrote:

Same question for hull chips - small batch for touch up of my 33-2For the deck 
- I had a gallonof gel coat tinted by Canada composites - I had a core section 
of deck where I polished the non skid and matched it to their box of samples - 
worked very well.  
Dave 33-2 windstar


Sent from my iPhone

On May 23, 2021, at 9:24 AM, Adam Hayden via CnC-List  
wrote:



Hello
I am sure this has been asked before.  Has anyone produced the colour charts 
for gelcoat repair?  I replaced a number of stanchion bases and now have some 
holes to repair. (I have the epoxy etc just looking for the final topcoat to 
match the rest of the deck)Our decks are that slightly off-white light beige 
colour.
I am in Nova Scotia so may try Burnside Fibreglass.
Thanks
AdamC 36State of Bliss
Sent from my Bell Samsung device over Canada’s largest network.Thanks to all of 
the subscribers that contributed to the list to help with the costs involved.  
If you want to show your support to the list - use PayPal to send contribution 
--   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --  https://www.paypal.me/stumurray  Thanks - Stu  Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Gelcoat colour matching

2021-05-24 Thread cenelson via CnC-List 
I have used Kiwi but not tinted it. I have heard/read that it is done easily at 
paint stores/big box stores etc. So I think it is pretty easy to do and match 
if you have a sample from your boat for them to use for the match.
Charlie Nelson1995 C 36XL/kcbWater Phantom


Sent from the all new AOL app for iOS


On Monday, May 24, 2021, 4:33 PM, Robert Mazza via CnC-List 
 wrote:

On a ralated subject, has anyone tintedwhite Kiwi Grip to better match  the 
off- white gelcoat surrounding it?
Rob 
On Sun, May 23, 2021, 11:12 AM Dave S via CnC-List,  
wrote:

Same question for hull chips - small batch for touch up of my 33-2For the deck 
- I had a gallonof gel coat tinted by Canada composites - I had a core section 
of deck where I polished the non skid and matched it to their box of samples - 
worked very well.  
Dave 33-2 windstar


Sent from my iPhone

On May 23, 2021, at 9:24 AM, Adam Hayden via CnC-List  
wrote:



Hello
I am sure this has been asked before.  Has anyone produced the colour charts 
for gelcoat repair?  I replaced a number of stanchion bases and now have some 
holes to repair. (I have the epoxy etc just looking for the final topcoat to 
match the rest of the deck)Our decks are that slightly off-white light beige 
colour.
I am in Nova Scotia so may try Burnside Fibreglass.
Thanks
AdamC 36State of Bliss
Sent from my Bell Samsung device over Canada’s largest network.Thanks to all of 
the subscribers that contributed to the list to help with the costs involved.  
If you want to show your support to the list - use PayPal to send contribution 
--   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --  https://www.paypal.me/stumurray  Thanks - Stu


Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Gelcoat colour matching

2021-05-24 Thread Robert Mazza via CnC-List 
On a ralated subject, has anyone tinted
white Kiwi Grip to better match  the off- white gelcoat surrounding it?

Rob

On Sun, May 23, 2021, 11:12 AM Dave S via CnC-List, 
wrote:

> Same question for hull chips - small batch for touch up of my 33-2
> For the deck -
> I had a gallonof gel coat tinted by Canada composites - I had a core
> section of deck where I polished the non skid and matched it to their box
> of samples - worked very well.
>
> Dave 33-2 windstar
>
>
>
> Sent from my iPhone
>
> On May 23, 2021, at 9:24 AM, Adam Hayden via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
> 
> Hello
>
> I am sure this has been asked before.  Has anyone produced the colour
> charts for gelcoat repair?  I replaced a number of stanchion bases and now
> have some holes to repair. (I have the epoxy etc just looking for the final
> topcoat to match the rest of the deck)
> Our decks are that slightly off-white light beige colour.
>
> I am in Nova Scotia so may try Burnside Fibreglass.
>
> Thanks
>
> Adam
> C 36
> State of Bliss
>
> Sent from my Bell Samsung device over Canada’s largest network.
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu
>
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Gelcoat colour matching

2021-05-23 Thread jhnelson24 via CnC-List 
Once pretty much anything has cured you are creating a mechanical bond vs a 
chemical bond. Etching or course sand will give you good bonding results.  At 
least worked for me for the last 23 yearsSent from my Galaxy
 Original message From: Doug Mountjoy via CnC-List 
 Date: 2021-05-23  19:10  (GMT-04:00) To: Stus-List 
 Cc: Doug Mountjoy  Subject: 
Stus-List Re: Gelcoat colour matching Thats what I was told by Fiberlay the 
local fiberglass supplier, and the "expert" I talked to prior to buying 
supplies to build my holding tank. But then he told me I needed 5 gallons of 
polyester resin, I used 1. Sent from my T-Mobile 4G LTE DeviceDoug MountjoyPort 
Orchard YCPort Orchard,  WARebecca Leah1988 LF39  Original message 
From: dwight veinot via CnC-List  Date: 5/23/21  
12:33 PM  (GMT-08:00) To: Stus-List  Cc: dwight veinot 
 Subject: Stus-List Re: Gelcoat colour matching Are you 
totally sure about thatOn Sun, May 23, 2021 at 12:55 PM Doug Mountjoy via 
CnC-List  wrote:Be advised, Gel coat is Polyester based 
and will not adhere to epoxy, but epoxy will adhere to polyester and or vinyl 
ester based fiberglass. Gel coat will also work with vinyl ester based 
fiberglass. DougOn Sun, May 23, 2021 at 8:17 AM Graham Collins via CnC-List 
 wrote:

  
  
Hi Adam
Burnside Fiberglass loaned me the color cards to compare to my
  gelcoat, for best results you might want to ask them if they still
  do that.  I can tell you what my can of gelcoat is marked (or you
  could try some if you want, it isn't like I'll use it all...). 
  I'm at AYC, where are you located?

Graham Collins
Secret Plans
C 35-III #11
On 2021-05-23 10:23 a.m., Adam Hayden
  via CnC-List wrote:


  
  
Hello
  

  
  
I am sure this has been asked before.  Has anyone produced the
colour charts for gelcoat repair?  I replaced a number of
stanchion bases and now have some holes to repair. (I have the
epoxy etc just looking for the final topcoat to match the rest
of the deck)
  
Our decks are that slightly off-white light beige colour.
  

  
  
I am in Nova Scotia so may try Burnside Fibreglass.
  

  
  
Thanks
  

  
  
Adam
  
C 36
  
State of Bliss
  


Sent from my Bell Samsung device over Canada’s largest network.
  
  
  Thanks to all of the subscribers that contributed to the list to help 
with the costs involved.  If you want to show your support to the list - use 
PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

  

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu-- Douglas 
Mountjoy253-208-1412Port Orchard YC, WARebecca LeahC LandFall 39
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu-- Sent 
from Gmail Mobile
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Gelcoat colour matching

2021-05-23 Thread Dave S via CnC-List 
I recall reading this in the dim and distant past in the context of structural 
repairs.   

Dave



Sent from my iPhone

> On May 23, 2021, at 6:10 PM, Doug Mountjoy via CnC-List 
>  wrote:
> 
> 
> Thats what I was told by Fiberlay the local fiberglass supplier, and the 
> "expert" I talked to prior to buying supplies to build my holding tank.
>  But then he told me I needed 5 gallons of polyester resin, I used 1. 
> 
> 
> 
> Sent from my T-Mobile 4G LTE Device
> 
> Doug Mountjoy
> Port Orchard YC
> Port Orchard,  WA
> Rebecca Leah
> 1988 LF39 
> 
> 
>  Original message 
> From: dwight veinot via CnC-List 
> Date: 5/23/21 12:33 PM (GMT-08:00)
> To: Stus-List 
> Cc: dwight veinot 
> Subject: Stus-List Re: Gelcoat colour matching
> 
> Are you totally sure about that
> 
>> On Sun, May 23, 2021 at 12:55 PM Doug Mountjoy via CnC-List 
>>  wrote:
>> Be advised, Gel coat is Polyester based and will not adhere to epoxy, but 
>> epoxy will adhere to polyester and or vinyl ester based fiberglass. Gel coat 
>> will also work with vinyl ester based fiberglass. 
>> 
>> Doug
>> 
>>> On Sun, May 23, 2021 at 8:17 AM Graham Collins via CnC-List 
>>>  wrote:
>>> Hi Adam
>>> 
>>> Burnside Fiberglass loaned me the color cards to compare to my gelcoat, for 
>>> best results you might want to ask them if they still do that.  I can tell 
>>> you what my can of gelcoat is marked (or you could try some if you want, it 
>>> isn't like I'll use it all...).  I'm at AYC, where are you located?
>>> 
>>> Graham Collins
>>> Secret Plans
>>> C 35-III #11
>>> On 2021-05-23 10:23 a.m., Adam Hayden via CnC-List wrote:
>>>> Hello
>>>> 
>>>> I am sure this has been asked before.  Has anyone produced the colour 
>>>> charts for gelcoat repair?  I replaced a number of stanchion bases and now 
>>>> have some holes to repair. (I have the epoxy etc just looking for the 
>>>> final topcoat to match the rest of the deck)
>>>> Our decks are that slightly off-white light beige colour.
>>>> 
>>>> I am in Nova Scotia so may try Burnside Fibreglass.
>>>> 
>>>> Thanks
>>>> 
>>>> Adam
>>>> C 36
>>>> State of Bliss
>>>> 
>>>> Sent from my Bell Samsung device over Canada’s largest network.
>>>> 
>>>> 
>>>> Thanks to all of the subscribers that contributed to the list to help with 
>>>> the costs involved.  If you want to show your support to the list - use 
>>>> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - 
>>>> Stu
>>> Thanks to all of the subscribers that contributed to the list to help with 
>>> the costs involved.  If you want to show your support to the list - use 
>>> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - 
>>> Stu
>> 
>> 
>> -- 
>> Douglas Mountjoy
>> 253-208-1412
>> Port Orchard YC, WA
>> Rebecca Leah
>> C LandFall 39
>> Thanks to all of the subscribers that contributed to the list to help with 
>> the costs involved.  If you want to show your support to the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - 
>> Stu
> -- 
> Sent from Gmail Mobile
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Gelcoat colour matching

2021-05-23 Thread Doug Mountjoy via CnC-List 
Thats what I was told by Fiberlay the local fiberglass supplier, and the 
"expert" I talked to prior to buying supplies to build my holding tank. But 
then he told me I needed 5 gallons of polyester resin, I used 1. Sent from my 
T-Mobile 4G LTE DeviceDoug MountjoyPort Orchard YCPort Orchard,  WARebecca 
Leah1988 LF39 
 Original message From: dwight veinot via CnC-List 
 Date: 5/23/21  12:33 PM  (GMT-08:00) To: Stus-List 
 Cc: dwight veinot  Subject: 
Stus-List Re: Gelcoat colour matching Are you totally sure about thatOn Sun, 
May 23, 2021 at 12:55 PM Doug Mountjoy via CnC-List  
wrote:Be advised, Gel coat is Polyester based and will not adhere to epoxy, but 
epoxy will adhere to polyester and or vinyl ester based fiberglass. Gel coat 
will also work with vinyl ester based fiberglass. DougOn Sun, May 23, 2021 at 
8:17 AM Graham Collins via CnC-List  wrote:

  
  
Hi Adam
Burnside Fiberglass loaned me the color cards to compare to my
  gelcoat, for best results you might want to ask them if they still
  do that.  I can tell you what my can of gelcoat is marked (or you
  could try some if you want, it isn't like I'll use it all...). 
  I'm at AYC, where are you located?

Graham Collins
Secret Plans
C 35-III #11
On 2021-05-23 10:23 a.m., Adam Hayden
  via CnC-List wrote:


  
  
Hello
  

  
  
I am sure this has been asked before.  Has anyone produced the
colour charts for gelcoat repair?  I replaced a number of
stanchion bases and now have some holes to repair. (I have the
epoxy etc just looking for the final topcoat to match the rest
of the deck)
  
Our decks are that slightly off-white light beige colour.
  

  
  
I am in Nova Scotia so may try Burnside Fibreglass.
  

  
  
Thanks
  

  
  
Adam
  
C 36
  
State of Bliss
  


Sent from my Bell Samsung device over Canada’s largest network.
  
  
  Thanks to all of the subscribers that contributed to the list to help 
with the costs involved.  If you want to show your support to the list - use 
PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

  

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu-- Douglas 
Mountjoy253-208-1412Port Orchard YC, WARebecca LeahC LandFall 39
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu-- Sent 
from Gmail Mobile
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Gelcoat colour matching

2021-05-23 Thread Adam Hayden via CnC-List 
Thanks everyone.  I appreciate the responses
Adam

Sent from my Bell Samsung device over Canada’s largest network.


From: Rod Stright via CnC-List 
Sent: Sunday, May 23, 2021 4:55:19 PM
To: 'Stus-List' 
Cc: Rod Stright 
Subject: Stus-List Re: Gelcoat colour matching


I have a 2004 C 99 which has a vacuum bagged epoxy hull.  The finish is a 
polyester gel coat.  Here is a quote from Tim Jackett the designer from Tartan 
Yachts who built the boat “The gelcoat is NPG Isothalic, which is a polyester 
product.” So obviously it can be done with the proper preparation.  The finish 
sill looks like new.



Rod Stright

Sail Safe,



Rod Stright

[cid:image001.png@01D74FF4.694568D0]

President

C 99 Class Association

Halifax

Nova Scotia





From: dwight veinot via CnC-List 
Sent: May-23-21 4:32 PM
To: Stus-List 
Cc: dwight veinot 
Subject: Stus-List Re: Gelcoat colour matching



Are you totally sure about that



On Sun, May 23, 2021 at 12:55 PM Doug Mountjoy via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

Be advised, Gel coat is Polyester based and will not adhere to epoxy, but epoxy 
will adhere to polyester and or vinyl ester based fiberglass. Gel coat will 
also work with vinyl ester based fiberglass.



Doug



On Sun, May 23, 2021 at 8:17 AM Graham Collins via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

Hi Adam

Burnside Fiberglass loaned me the color cards to compare to my gelcoat, for 
best results you might want to ask them if they still do that.  I can tell you 
what my can of gelcoat is marked (or you could try some if you want, it isn't 
like I'll use it all...).  I'm at AYC, where are you located?

Graham Collins

Secret Plans

C 35-III #11

On 2021-05-23 10:23 a.m., Adam Hayden via CnC-List wrote:

Hello



I am sure this has been asked before.  Has anyone produced the colour charts 
for gelcoat repair?  I replaced a number of stanchion bases and now have some 
holes to repair. (I have the epoxy etc just looking for the final topcoat to 
match the rest of the deck)

Our decks are that slightly off-white light beige colour.



I am in Nova Scotia so may try Burnside Fibreglass.



Thanks



Adam

C 36

State of Bliss



Sent from my Bell Samsung device over Canada’s largest network.



Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu


--

Douglas Mountjoy
253-208-1412

Port Orchard YC, WA

Rebecca Leah

C LandFall 39

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

--

Sent from Gmail Mobile
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Gelcoat colour matching

2021-05-23 Thread Rod Stright via CnC-List 
I have a 2004 C 99 which has a vacuum bagged epoxy hull.  The finish is a 
polyester gel coat.  Here is a quote from Tim Jackett the designer from Tartan 
Yachts who built the boat “The gelcoat is NPG Isothalic, which is a polyester 
product.” So obviously it can be done with the proper preparation.  The finish 
sill looks like new.

 

Rod Stright

Sail Safe,

 

Rod Stright



President

C 99 Class Association

Halifax

Nova Scotia

 

 

From: dwight veinot via CnC-List  
Sent: May-23-21 4:32 PM
To: Stus-List 
Cc: dwight veinot 
Subject: Stus-List Re: Gelcoat colour matching

 

Are you totally sure about that

 

On Sun, May 23, 2021 at 12:55 PM Doug Mountjoy via CnC-List 
mailto:cnc-list@cnc-list.com> > wrote:

Be advised, Gel coat is Polyester based and will not adhere to epoxy, but epoxy 
will adhere to polyester and or vinyl ester based fiberglass. Gel coat will 
also work with vinyl ester based fiberglass. 

 

Doug

 

On Sun, May 23, 2021 at 8:17 AM Graham Collins via CnC-List 
mailto:cnc-list@cnc-list.com> > wrote:

Hi Adam

Burnside Fiberglass loaned me the color cards to compare to my gelcoat, for 
best results you might want to ask them if they still do that.  I can tell you 
what my can of gelcoat is marked (or you could try some if you want, it isn't 
like I'll use it all...).  I'm at AYC, where are you located?

Graham Collins
Secret Plans
C 35-III #11

On 2021-05-23 10:23 a.m., Adam Hayden via CnC-List wrote:

Hello

 

I am sure this has been asked before.  Has anyone produced the colour charts 
for gelcoat repair?  I replaced a number of stanchion bases and now have some 
holes to repair. (I have the epoxy etc just looking for the final topcoat to 
match the rest of the deck)

Our decks are that slightly off-white light beige colour.

 

I am in Nova Scotia so may try Burnside Fibreglass.

 

Thanks

 

Adam

C 36

State of Bliss

 

Sent from my Bell Samsung device over Canada’s largest network.

 

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu



-- 

Douglas Mountjoy
253-208-1412

Port Orchard YC, WA

Rebecca Leah

C LandFall 39

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

-- 

Sent from Gmail Mobile

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Gelcoat colour matching

2021-05-23 Thread dwight veinot via CnC-List 
Are you totally sure about that

On Sun, May 23, 2021 at 12:55 PM Doug Mountjoy via CnC-List <
cnc-list@cnc-list.com> wrote:

> Be advised, Gel coat is Polyester based and will not adhere to epoxy, but
> epoxy will adhere to polyester and or vinyl ester based fiberglass. Gel
> coat will also work with vinyl ester based fiberglass.
>
> Doug
>
> On Sun, May 23, 2021 at 8:17 AM Graham Collins via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Hi Adam
>>
>> Burnside Fiberglass loaned me the color cards to compare to my gelcoat,
>> for best results you might want to ask them if they still do that.  I can
>> tell you what my can of gelcoat is marked (or you could try some if you
>> want, it isn't like I'll use it all...).  I'm at AYC, where are you located?
>>
>> Graham Collins
>> Secret Plans
>> C 35-III #11
>>
>> On 2021-05-23 10:23 a.m., Adam Hayden via CnC-List wrote:
>>
>> Hello
>>
>> I am sure this has been asked before.  Has anyone produced the colour
>> charts for gelcoat repair?  I replaced a number of stanchion bases and now
>> have some holes to repair. (I have the epoxy etc just looking for the final
>> topcoat to match the rest of the deck)
>> Our decks are that slightly off-white light beige colour.
>>
>> I am in Nova Scotia so may try Burnside Fibreglass.
>>
>> Thanks
>>
>> Adam
>> C 36
>> State of Bliss
>>
>> Sent from my Bell Samsung device over Canada’s largest network.
>>
>> Thanks to all of the subscribers that contributed to the list to help with 
>> the costs involved.  If you want to show your support to the list - use 
>> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - 
>> Stu
>>
>> Thanks to all of the subscribers that contributed to the list to help
>> with the costs involved.  If you want to show your support to the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>> Thanks - Stu
>
>
>
> --
> Douglas Mountjoy
> 253-208-1412
> Port Orchard YC, WA
> Rebecca Leah
> C LandFall 39
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu

-- 
Sent from Gmail Mobile
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Gelcoat colour matching

2021-05-23 Thread Graham Collins via CnC-List 

Hi Doug

Some would disagree with that statement (myself included).

https://www.epoxyworks.com/index.php/applying-polyester-gelcoat-over-epoxy/ 



Graham Collins
Secret Plans
C 35-III #11

On 2021-05-23 12:55 p.m., Doug Mountjoy wrote:
Be advised, Gel coat is Polyester based and will not adhere to epoxy, 
but epoxy will adhere to polyester and or vinyl ester based 
fiberglass. Gel coat will also work with vinyl ester based fiberglass.


Doug

On Sun, May 23, 2021 at 8:17 AM Graham Collins via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:


Hi Adam

Burnside Fiberglass loaned me the color cards to compare to my
gelcoat, for best results you might want to ask them if they still
do that.  I can tell you what my can of gelcoat is marked (or you
could try some if you want, it isn't like I'll use it all...). 
I'm at AYC, where are you located?

Graham Collins
Secret Plans
C 35-III #11

On 2021-05-23 10:23 a.m., Adam Hayden via CnC-List wrote:

Hello

I am sure this has been asked before.  Has anyone produced the
colour charts for gelcoat repair?  I replaced a number of
stanchion bases and now have some holes to repair. (I have the
epoxy etc just looking for the final topcoat to match the rest of
the deck)
Our decks are that slightly off-white light beige colour.

I am in Nova Scotia so may try Burnside Fibreglass.

Thanks

Adam
C 36
State of Bliss

Sent from my Bell Samsung device over Canada’s largest network.

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to send 
contribution --https://www.paypal.me/stumurray  
   Thanks - Stu

Thanks to all of the subscribers that contributed to the list to
help with the costs involved.  If you want to show your support to
the list - use PayPal to send contribution --
https://www.paypal.me/stumurray 
Thanks - Stu



--
Douglas Mountjoy
253-208-1412
Port Orchard YC, WA
Rebecca Leah
C LandFall 39
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Gelcoat colour matching

2021-05-23 Thread Doug Mountjoy via CnC-List 
Be advised, Gel coat is Polyester based and will not adhere to epoxy, but
epoxy will adhere to polyester and or vinyl ester based fiberglass. Gel
coat will also work with vinyl ester based fiberglass.

Doug

On Sun, May 23, 2021 at 8:17 AM Graham Collins via CnC-List <
cnc-list@cnc-list.com> wrote:

> Hi Adam
>
> Burnside Fiberglass loaned me the color cards to compare to my gelcoat,
> for best results you might want to ask them if they still do that.  I can
> tell you what my can of gelcoat is marked (or you could try some if you
> want, it isn't like I'll use it all...).  I'm at AYC, where are you located?
>
> Graham Collins
> Secret Plans
> C 35-III #11
>
> On 2021-05-23 10:23 a.m., Adam Hayden via CnC-List wrote:
>
> Hello
>
> I am sure this has been asked before.  Has anyone produced the colour
> charts for gelcoat repair?  I replaced a number of stanchion bases and now
> have some holes to repair. (I have the epoxy etc just looking for the final
> topcoat to match the rest of the deck)
> Our decks are that slightly off-white light beige colour.
>
> I am in Nova Scotia so may try Burnside Fibreglass.
>
> Thanks
>
> Adam
> C 36
> State of Bliss
>
> Sent from my Bell Samsung device over Canada’s largest network.
>
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
>
> Thanks to all of the subscribers that contributed to the list to help with
> the costs involved.  If you want to show your support to the list - use
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks
> - Stu



-- 
Douglas Mountjoy
253-208-1412
Port Orchard YC, WA
Rebecca Leah
C LandFall 39
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Gelcoat colour matching

2021-05-23 Thread Graham Collins via CnC-List 

Hi Adam

Burnside Fiberglass loaned me the color cards to compare to my gelcoat, 
for best results you might want to ask them if they still do that.  I 
can tell you what my can of gelcoat is marked (or you could try some if 
you want, it isn't like I'll use it all...). I'm at AYC, where are you 
located?


Graham Collins
Secret Plans
C 35-III #11

On 2021-05-23 10:23 a.m., Adam Hayden via CnC-List wrote:

Hello

I am sure this has been asked before.  Has anyone produced the colour 
charts for gelcoat repair?  I replaced a number of stanchion bases and 
now have some holes to repair. (I have the epoxy etc just looking for 
the final topcoat to match the rest of the deck)

Our decks are that slightly off-white light beige colour.

I am in Nova Scotia so may try Burnside Fibreglass.

Thanks

Adam
C 36
State of Bliss

Sent from my Bell Samsung device over Canada’s largest network.

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Gelcoat colour matching

2021-05-23 Thread Dave S via CnC-List 
Same question for hull chips - small batch for touch up of my 33-2
For the deck - 
I had a gallonof gel coat tinted by Canada composites - I had a core section of 
deck where I polished the non skid and matched it to their box of samples - 
worked very well.  

Dave 33-2 windstar



Sent from my iPhone

> On May 23, 2021, at 9:24 AM, Adam Hayden via CnC-List  
> wrote:
> 
> 
> Hello
> 
> I am sure this has been asked before.  Has anyone produced the colour charts 
> for gelcoat repair?  I replaced a number of stanchion bases and now have some 
> holes to repair. (I have the epoxy etc just looking for the final topcoat to 
> match the rest of the deck)
> Our decks are that slightly off-white light beige colour.
> 
> I am in Nova Scotia so may try Burnside Fibreglass.
> 
> Thanks
> 
> Adam
> C 36
> State of Bliss
> 
> Sent from my Bell Samsung device over Canada’s largest network.
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Gelcoat colour matching

2021-05-23 Thread billbruce--- via CnC-List 

 
  
   Burnside Fiberglass color matched a can of gelcoat for a 35 C  a couple of weeks ago (cabin top) which was a very good match. He had to make several attempts before getting it just right, but he kept going until it was right. I was very happy with the match.
   
   Bill Bruce.
  
 
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu