Re: Stus-List Cabin Sole resurfacing
But expensive!?! I did mine as well and the 4x8 sheet was over $700. Looks great now though. Neil 1982 C 32, FoxFire Rock Hall, MD Neil Andersen 20691 Jamieson Rd Rock Hall, MD 21661 From: CnC-List on behalf of Stephen Thorne via CnC-List Sent: Saturday, November 9, 2019 8:34 AM To: cnc-list@cnc-list.com Cc: Stephen Thorne Subject: Re: Stus-List Cabin Sole resurfacing I had the same project on my 34+ and after looking at various options ended up ordering a new sheet of teak & holly plywood. Was a little more effort but I wanted to stay with the wood sole. Love the end results. Steve Thorne Deja Vu 1990 34+ On Sat, Nov 9, 2019 at 8:22 AM David Knecht via CnC-List mailto:cnc-list@cnc-list.com>> wrote: The cabin sole on my boat is not in great shape. There are areas where the holly stripes and are gone or pulling away. I am considering what to do and have a vague recollection of someone using a glue-on faux teak/holley covering over the wood (Nautikflor?) but I can’t find that discussion anywhere in the archives. Has anyone done that? Thanks- Dave S/V Aries 1990 C 34+ New London, CT [cid:16e505ba7161022a4281] ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Cabin Sole resurfacing
Bruce, I used Awlgrip’s Awlwood MA Gloss and Primer on the teak and holly surface. Finished off with a regular satin finish varnish. I used West System epoxy to seal the rest of the surfaces. http://roninrebuild.blogspot.com/search?updated-max=2015-03-16T14:37:00-07:00=7=13=false Regards, Dave Sent from my iPad > On Nov 9, 2019, at 08:53, bwhitmore via CnC-List > wrote: > > I'm looking at replacing ours as well, though probably sometime next year. > What is the preferred method of sealing and varnishing the wood? What > varnish did you use? Did you seal the underside with epoxy? If so, what > kind? > > Bruce Whitmore > 1994 C 37/40+ > "Astralis" > > > > Sent from Samsung tablet. > ___ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Cabin Sole resurfacing
I managed to salvage the teak and holly floor on my boat with a bunch of sanding and then revarnishing. I glued the plywood back together where it was delaminating near the edge and ended up sanding through the the holly stops near a few edges where it was in rough shape but it still looks pretty good and has been very functional. Depending on how bad it is you might want to try just salvaging what is there. - - Nathan Post S/V Wisper 1981 C 34 Lynn, MA ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Cabin Sole resurfacing
Ok. Leaving home now. Will be there in 15 mins -Original Message- From: CnC-List On Behalf Of Matthew L. Wolford via CnC-List Sent: November 9, 2019 12:06 PM To: cnc-list@cnc-list.com Cc: Matthew L. Wolford Subject: Re: Stus-List Cabin Sole resurfacing I'm in the middle of this project. I was planning on doing the new plywood/fake teak and holly thing, but last year something happened that changed my mind. While doing a different project, I spilled some acetone on a floorboard that caused the varnish to peel. I decided to fix that one board for the season. I took it home, stripped the old varnish, scrubbed it with some oxylic (sp.) acid/water solution, let it dry, lightly sanded, sealed the bottom and ends with West System, and covered the surface with two coats of Minwax satin varnish. It's not perfect, but it looks so good that I have abandoned my original plan and am going to restore all the other boards in the same manner. -Original Message- From: Nathan Post via CnC-List Sent: Saturday, November 09, 2019 9:14 AM To: cnc-list@cnc-list.com Cc: Nathan Post Subject: Re: Stus-List Cabin Sole resurfacing I managed to salvage the teak and holly floor on my boat with a bunch of sanding and then revarnishing. I glued the plywood back together where it was delaminating near the edge and ended up sanding through the the holly stops near a few edges where it was in rough shape but it still looks pretty good and has been very functional. Depending on how bad it is you might want to try just salvaging what is there. - - Nathan Post S/V Wisper 1981 C 34 Lynn, MA ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Cabin Sole resurfacing
I had the same project on my 34+ and after looking at various options ended up ordering a new sheet of teak & holly plywood. Was a little more effort but I wanted to stay with the wood sole. Love the end results. Steve Thorne Deja Vu 1990 34+ On Sat, Nov 9, 2019 at 8:22 AM David Knecht via CnC-List < cnc-list@cnc-list.com> wrote: > The cabin sole on my boat is not in great shape. There are areas where > the holly stripes and are gone or pulling away. I am considering what to > do and have a vague recollection of someone using a glue-on faux > teak/holley covering over the wood (Nautikflor?) but I can’t find that > discussion anywhere in the archives. Has anyone done that? Thanks- Dave > > S/V Aries > 1990 C 34+ > New London, CT > > > ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Stus-List Cabin Sole resurfacing
The cabin sole on my boat is not in great shape. There are areas where the holly stripes and are gone or pulling away. I am considering what to do and have a vague recollection of someone using a glue-on faux teak/holley covering over the wood (Nautikflor?) but I can’t find that discussion anywhere in the archives. Has anyone done that? Thanks- Dave S/V Aries 1990 C 34+ New London, CT ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Cabin Sole resurfacing
I’ve done my cabin sole twice since buying the boat in 1997. I thought about using a non-wood covering product on this last iteration. When I started to price out the cost of okume marine plywood plus the cost of the covering there were now real savings to be had compared to buying two sheets of 3/4 teak and holly plywood. I suppose an argument can be made about not having to spend a great deal of time finishing the flooring when using a new applied material. If you are going to use the existing flooring probably a good idea to make sure that it is not delaminating. Mine was. Regards, Dave 1982 C 37 - Ronin Sent from my iPad > On Nov 9, 2019, at 08:37, Neil Andersen via CnC-List > wrote: > > But expensive!?! I did mine as well and the 4x8 sheet was over $700. Looks > great now though. > > Neil > 1982 C 32, FoxFire > Rock Hall, MD > > Neil Andersen > 20691 Jamieson Rd > Rock Hall, MD 21661 > > From: CnC-List on behalf of Stephen Thorne > via CnC-List > Sent: Saturday, November 9, 2019 8:34 AM > To: cnc-list@cnc-list.com > Cc: Stephen Thorne > Subject: Re: Stus-List Cabin Sole resurfacing > > I had the same project on my 34+ and after looking at various options ended > up ordering a new sheet of teak & holly plywood. Was a little more effort > but I wanted to stay with the wood sole. Love the end results. > > Steve Thorne > Deja Vu > 1990 34+ > >> On Sat, Nov 9, 2019 at 8:22 AM David Knecht via CnC-List >> wrote: >> The cabin sole on my boat is not in great shape. There are areas where the >> holly stripes and are gone or pulling away. I am considering what to do >> and have a vague recollection of someone using a glue-on faux teak/holley >> covering over the wood (Nautikflor?) but I can’t find that discussion >> anywhere in the archives. Has anyone done that? Thanks- Dave >> >> S/V Aries >> 1990 C 34+ >> New London, CT >> >> >> >> ___ >> >> Thanks everyone for supporting this list with your contributions. Each and >> every one is greatly appreciated. If you want to support the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray >> > ___ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Cabin Sole resurfacing
I'm looking at replacing ours as well, though probably sometime next year. What is the preferred method of sealing and varnishing the wood? What varnish did you use? Did you seal the underside with epoxy? If so, what kind?Bruce Whitmore 1994 C 37/40+"Astralis"Sent from Samsung tablet. null___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Cabin Sole resurfacing
I'm in the middle of this project. I was planning on doing the new plywood/fake teak and holly thing, but last year something happened that changed my mind. While doing a different project, I spilled some acetone on a floorboard that caused the varnish to peel. I decided to fix that one board for the season. I took it home, stripped the old varnish, scrubbed it with some oxylic (sp.) acid/water solution, let it dry, lightly sanded, sealed the bottom and ends with West System, and covered the surface with two coats of Minwax satin varnish. It's not perfect, but it looks so good that I have abandoned my original plan and am going to restore all the other boards in the same manner. -Original Message- From: Nathan Post via CnC-List Sent: Saturday, November 09, 2019 9:14 AM To: cnc-list@cnc-list.com Cc: Nathan Post Subject: Re: Stus-List Cabin Sole resurfacing I managed to salvage the teak and holly floor on my boat with a bunch of sanding and then revarnishing. I glued the plywood back together where it was delaminating near the edge and ended up sanding through the the holly stops near a few edges where it was in rough shape but it still looks pretty good and has been very functional. Depending on how bad it is you might want to try just salvaging what is there. - - Nathan Post S/V Wisper 1981 C 34 Lynn, MA ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Stus-List Test new VHF wire for dummies...
I just replaced the VHF wire in my mast and crimped on new connectors. Would like to test it to make sure all is well before the mast goes up in the spring. Any suggestions from those much smarter than I regarding these matters? Thanks in advance. ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Cabin Sole resurfacing
On Persistence we went with new teak and holly. Thankfully one sheet did entire job because was well over 600 CAD at the time. West epoxy on bottom and sides using special hardener (the one for wood). Top three coats west epoxy followed by four costs epiphanes satin varnish. Extremely important to use the proper hardener so that you do not see flow arks of the epoxy Mike Persistence Halifax From: CnC-List On Behalf Of Dave Godwin via CnC-List Sent: November 9, 2019 10:15 AM To: cnc-list@cnc-list.com Cc: Dave Godwin Subject: Re: Stus-List Cabin Sole resurfacing Bruce, I used Awlgrip’s Awlwood MA Gloss and Primer on the teak and holly surface. Finished off with a regular satin finish varnish. I used West System epoxy to seal the rest of the surfaces. http://roninrebuild.blogspot.com/search?updated-max=2015-03-16T14:37:00-07:00=7=13=false Regards, Dave Sent from my iPad On Nov 9, 2019, at 08:53, bwhitmore via CnC-List mailto:cnc-list@cnc-list.com>> wrote: I'm looking at replacing ours as well, though probably sometime next year. What is the preferred method of sealing and varnishing the wood? What varnish did you use? Did you seal the underside with epoxy? If so, what kind? Bruce Whitmore 1994 C 37/40+ "Astralis" Sent from Samsung tablet. ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Stus-List Fwd: Fwd: Cabin Sole resurfacing
Hi Rod Here is a link to the product I purchased from Defender. Correction on product name. PlasTeak is the trade name. Lonseal makes them all. https://www.defender.com/product3.jsp?path=-1%7C2276179%7C2276198%7C2276201=3325405 I’m on the east coast now I could provide pics next week when I get home. Mike Begin forwarded message: > From: Rod Stright > Date: November 9, 2019 at 5:06:27 PM AST > Cc: Mike Taylor > Subject: Re: Stus-List Fwd: Cabin Sole resurfacing > > Can you send additional info haven’t heard of it here. > > Thanks > Rod > > Sent from my iPhone > >>> On Nov 9, 2019, at 4:46 PM, Mike Taylor via CnC-List >>> wrote: >>> >> >> Dave >> >> I went with PlasTeak a few years ago. New plywood with 2 coats of West >> system epoxy. Looks real good. Got it at Defender. Can send some tips and >> pics if you desire. >> >> Mike >> Begin forwarded message: >> >>> From: David Knecht via CnC-List >>> Date: November 9, 2019 at 9:22:28 AM AST >>> To: CnC discussion list CnC >>> Cc: David Knecht >>> Subject: Stus-List Cabin Sole resurfacing >>> Reply-To: cnc-list@cnc-list.com >>> >>> The cabin sole on my boat is not in great shape. There are areas where >>> the holly stripes and are gone or pulling away. I am considering what to >>> do and have a vague recollection of someone using a glue-on faux >>> teak/holley covering over the wood (Nautikflor?) but I can’t find that >>> discussion anywhere in the archives. Has anyone done that? Thanks- Dave >>> >>> S/V Aries >>> 1990 C 34+ >>> New London, CT >>> >> >>> >>> ___ >>> >>> Thanks everyone for supporting this list with your contributions. Each and >>> every one is greatly appreciated. If you want to support the list - use >>> PayPal to send contribution -- https://www.paypal.me/stumurray >>> >> ___ >> >> Thanks everyone for supporting this list with your contributions. Each and >> every one is greatly appreciated. If you want to support the list - use >> PayPal to send contribution -- https://www.paypal.me/stumurray >> ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Test new VHF wire for dummies...
I doubt I meet your requirement however a basic test: Use a digital ohmmeter to test for open, (none or poor conductivity) short (no resistance between shield and centre conductor). You will need a meter, and a short jumper wire with alligator clips each end. Use the resistance scale (ohms). To test, measure resistance between the pin and housing. Should be infinite (meaning they are not accidentally connected to each other). If there is conductivity, one of the terminations has allowed the shield to contact the conductor. You will need to redo. If ok, then use the jumper cable to connect the pin to the housing at one end and measure again at the other. This time there should be conductivity with some resistance (cumulative effect of a long run of cable, out and back) If the jumper test shows infinite resistance, then you have either jumpered poorly or one of the connections isn’t. Redo. Wiggle and yank each connection then test again. Dave. Sent from my iPad > On Nov 9, 2019, at 11:43 AM, David Risch wrote: > > I just replaced the VHF wire in my mast and crimped on new connectors. Would > like to test it to make sure all is well before the mast goes up in the > spring. Any suggestions from those much smarter than I regarding these > matters? > > Thanks in advance. ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Test new VHF wire for dummies...
Dave, Thank you so much. That was just what I needed. Thanks for the advice. Hope to do the same for you some day. Sent from my Android. Please forgive typos. Thank you. From: syerd...@gmail.com Sent: Saturday, November 9, 2019 12:46:45 PM To: David Risch ; C Stus List Subject: Re: Stus-List Test new VHF wire for dummies... I doubt I meet your requirement however a basic test: Use a digital ohmmeter to test for open, (none or poor conductivity) short (no resistance between shield and centre conductor). You will need a meter, and a short jumper wire with alligator clips each end. Use the resistance scale (ohms). To test, measure resistance between the pin and housing. Should be infinite (meaning they are not accidentally connected to each other). If there is conductivity, one of the terminations has allowed the shield to contact the conductor. You will need to redo. If ok, then use the jumper cable to connect the pin to the housing at one end and measure again at the other. This time there should be conductivity with some resistance (cumulative effect of a long run of cable, out and back) If the jumper test shows infinite resistance, then you have either jumpered poorly or one of the connections isn’t. Redo. Wiggle and yank each connection then test again. Dave. Sent from my iPad On Nov 9, 2019, at 11:43 AM, David Risch mailto:davidrisc...@msn.com>> wrote: I just replaced the VHF wire in my mast and crimped on new connectors. Would like to test it to make sure all is well before the mast goes up in the spring. Any suggestions from those much smarter than I regarding these matters? Thanks in advance. ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Stus-List Fwd: Cabin Sole resurfacing
DaveI went with PlasTeak a few years ago. New plywood with 2 coats of West system epoxy. Looks real good. Got it at Defender. Can send some tips and pics if you desire.MikeBegin forwarded message:From: David Knecht via CnC-List Date: November 9, 2019 at 9:22:28 AM ASTTo: CnC discussion list CnC Cc: David Knecht Subject: Stus-List Cabin Sole resurfacingReply-To: cnc-list@cnc-list.comThe cabin sole on my boat is not in great shape. There are areas where the holly stripes and are gone or pulling away. I am considering what to do and have a vague recollection of someone using a glue-on faux teak/holley covering over the wood (Nautikflor?) but I can’t find that discussion anywhere in the archives. Has anyone done that? Thanks- Dave S/V Aries1990 C 34+New London, CT ___Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Cabin Sole resurfacing
I think a lot of owners go a bit overboard with seeking perfection in the cabin sole. My 45 year old 35mkii has original teak snd holly sole. It’s attached with adhesive to whatever is underneath. I stripped it bare about 12 years ago and lightly sanded then cleaned and applied only 1 coat of Sikkens Cetol. Still in nice condition and has a wonderful patina. Before ripping out and replacing at big expense and effort consider rejuvenation. Worked for me and keep it dry whatever you do On Sat, Nov 9, 2019 at 3:19 PM Andrew Burton via CnC-List < cnc-list@cnc-list.com> wrote: > I've been varnishing adjacent to my job for decades. I’m a practical > traditionalist when it comes to vanishing. When I stripped and refinished > the sole on Peregrine, my 40, I built up using a few coats of Pettit clear > sealer applied over a day. This I let cure for a few days, then after a > light sanding with 150, I started with Epiphanes Wood finish Gloss, which > allows you to redcoat without sanding for up to three coats. After the > first three coats cured for a few days I sanded flat to fill up the grain. > Another round or two of three coats of Wood Finish Gloss and sanding with > 180 to rough up the surface I applied a “final coat” (with varnish, there's > no such thing as a final coat) of regular Epiphanes Gloss varnish. They had > lasted looking good for six years when I sold the boat to David. I gave > Masquerade's sole a similar treatment and it still looks good after two > seasons in New England and one in the Caribbean and a few races. > Gloss varnish is the only way to go for the sole as satin varnish is much > softer and won’t wear nearly as well. Yes, gloss is slipperier when wet, > but only marginally. A traditional yacht finish holds the sole finished > with gloss if its teak and holly. > Andy > Currently stuck in Bermuda wait for a nasty low to blow by. > > Andrew Burton > 139 Tuckerman Ave > Middletown, RI > USA02842 > > www.burtonsailing.com > http://sites.google.com/site/andrewburtonyachtservices/ > +401 965-5260 > > > On Nov 9, 2019, at 10:14, Nathan Post via CnC-List < > cnc-list@cnc-list.com> wrote: > > > > I managed to salvage the teak and holly floor on my boat with a bunch of > sanding and then revarnishing. I glued the plywood back together where it > was delaminating near the edge and ended up sanding through the the holly > stops near a few edges where it was in rough shape but it still looks > pretty good and has been very functional. Depending on how bad it is you > might want to try just salvaging what is there. > > > > - - > > Nathan Post > > S/V Wisper > > 1981 C 34 > > Lynn, MA > > ___ > > > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > > > ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > -- Sent from Gmail Mobile ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Thank You
Thanks to you Stu for all your dedicated work over the years. As we communicated a few weeks ago – please leave me off the regular list – now boatless and forever bailing out my in box. Ciao From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Stu via CnC-List Sent: Saturday, November 02, 2019 7:02 AM To: C Email List Cc: Stu Subject: Stus-List Thank You Again – my sincerest thanks to everyone who contributed to the Photo Album and this list during our fund raising month. Every contribution is greatly appreciated and ensures we will keep going for another year. THANK YOU! yes I am yelling. Stu ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Cabin Sole resurfacing
Thanks for letting us know Mike. See you soon dear. At 08:30 AM 11/9/2019, you wrote: Ok. Leaving home now. Will be there in 15 mins -Original Message- From: CnC-List On Behalf Of Matthew L. Wolford via CnC-List Sent: November 9, 2019 12:06 PM To: cnc-list@cnc-list.com Cc: Matthew L. Wolford Subject: Re: Stus-List Cabin Sole resurfacing ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Cabin Sole resurfacing
I've been varnishing adjacent to my job for decades. I’m a practical traditionalist when it comes to vanishing. When I stripped and refinished the sole on Peregrine, my 40, I built up using a few coats of Pettit clear sealer applied over a day. This I let cure for a few days, then after a light sanding with 150, I started with Epiphanes Wood finish Gloss, which allows you to redcoat without sanding for up to three coats. After the first three coats cured for a few days I sanded flat to fill up the grain. Another round or two of three coats of Wood Finish Gloss and sanding with 180 to rough up the surface I applied a “final coat” (with varnish, there's no such thing as a final coat) of regular Epiphanes Gloss varnish. They had lasted looking good for six years when I sold the boat to David. I gave Masquerade's sole a similar treatment and it still looks good after two seasons in New England and one in the Caribbean and a few races. Gloss varnish is the only way to go for the sole as satin varnish is much softer and won’t wear nearly as well. Yes, gloss is slipperier when wet, but only marginally. A traditional yacht finish holds the sole finished with gloss if its teak and holly. Andy Currently stuck in Bermuda wait for a nasty low to blow by. Andrew Burton 139 Tuckerman Ave Middletown, RI USA02842 www.burtonsailing.com http://sites.google.com/site/andrewburtonyachtservices/ +401 965-5260 > On Nov 9, 2019, at 10:14, Nathan Post via CnC-List > wrote: > > I managed to salvage the teak and holly floor on my boat with a bunch of > sanding and then revarnishing. I glued the plywood back together where it was > delaminating near the edge and ended up sanding through the the holly stops > near a few edges where it was in rough shape but it still looks pretty good > and has been very functional. Depending on how bad it is you might want to > try just salvaging what is there. > > - - > Nathan Post > S/V Wisper > 1981 C 34 > Lynn, MA > ___ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Fwd: Fwd: Cabin Sole resurfacing
That would be great Mike, I believe you said you put a finish on it? I am located in Halifax, Nova Scotia and own a C 99 Rod Sent from my iPhone > On Nov 9, 2019, at 5:43 PM, Mike Taylor via CnC-List > wrote: > > > Hi Rod > > Here is a link to the product I purchased from Defender. Correction on > product name. PlasTeak is the trade name. Lonseal makes them all. > > https://www.defender.com/product3.jsp?path=-1%7C2276179%7C2276198%7C2276201=3325405 > > I’m on the east coast now I could provide pics next week when I get home. > > Mike > Begin forwarded message: > >> From: Rod Stright >> Date: November 9, 2019 at 5:06:27 PM AST >> Cc: Mike Taylor >> Subject: Re: Stus-List Fwd: Cabin Sole resurfacing >> >> Can you send additional info haven’t heard of it here. >> >> Thanks >> Rod >> >> Sent from my iPhone >> On Nov 9, 2019, at 4:46 PM, Mike Taylor via CnC-List wrote: >>> >>> Dave >>> >>> I went with PlasTeak a few years ago. New plywood with 2 coats of West >>> system epoxy. Looks real good. Got it at Defender. Can send some tips >>> and pics if you desire. >>> >>> Mike >>> Begin forwarded message: >>> From: David Knecht via CnC-List Date: November 9, 2019 at 9:22:28 AM AST To: CnC discussion list CnC Cc: David Knecht Subject: Stus-List Cabin Sole resurfacing Reply-To: cnc-list@cnc-list.com The cabin sole on my boat is not in great shape. There are areas where the holly stripes and are gone or pulling away. I am considering what to do and have a vague recollection of someone using a glue-on faux teak/holley covering over the wood (Nautikflor?) but I can’t find that discussion anywhere in the archives. Has anyone done that? Thanks- Dave S/V Aries 1990 C 34+ New London, CT >>> ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray >>> ___ >>> >>> Thanks everyone for supporting this list with your contributions. Each and >>> every one is greatly appreciated. If you want to support the list - use >>> PayPal to send contribution -- https://www.paypal.me/stumurray >>> > ___ > > Thanks everyone for supporting this list with your contributions. Each and > every one is greatly appreciated. If you want to support the list - use > PayPal to send contribution -- https://www.paypal.me/stumurray > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
Re: Stus-List Cabin Sole resurfacing
Iinstalled PlasDek on a deck hatch on a trawler years ago. See: https://drive.google.com/file/d/0B_sb5TfIENvsV2NVZ1hmaGJ6cEU/view?usp=drivesdk It was pretty straightforward. For interiors look at PlasTeak. www.plasteak.com There are several instructional videos online. If I ever put a teak/holly sole on Touche' it will bePlasTeak or equivalent. Dennis C. Touche' 83 #83 Mandeville, LA On Sat, Nov 9, 2019, 7:22 AM David Knecht via CnC-List < cnc-list@cnc-list.com> wrote: > The cabin sole on my boat is not in great shape. There are areas where > the holly stripes and are gone or pulling away. I am considering what to > do and have a vague recollection of someone using a glue-on faux > teak/holley covering over the wood (Nautikflor?) but I can’t find that > discussion anywhere in the archives. Has anyone done that? Thanks- Dave > > S/V Aries > 1990 C 34+ > New London, CT > > > ___ > > Thanks everyone for supporting this list with your contributions. Each > and every one is greatly appreciated. If you want to support the list - > use PayPal to send contribution -- https://www.paypal.me/stumurray > > ___ Thanks everyone for supporting this list with your contributions. Each and every one is greatly appreciated. If you want to support the list - use PayPal to send contribution -- https://www.paypal.me/stumurray
